Seebidosaator kontaktivaba SoapTap 378

Vedelseebidosaator seinale 1,2L, vertikaalne R/V teras

Seebidosaator vertikaalne

R/V teras AISI 304,

1,2L

Bobrick

Tootekood: BOB-2111 , Tarneaeg: 5-6 nädala , Viimistlus:

151,44 €

Desinfikatsiooni dosaator senasisene 950ml R/V teras satiin

DISINFECTANT DISPENSER WP 208-7

148 x 448 x 120 mm
950 ml tank

Disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Further available surfaces: see below.
One-hand operated and non-drip disinfectant pump with 950 ml tank.
Tank with large, lockable refill opening.
Designed for standard disinfectants.
Inspection slot to indicate fill level.
Accessible for refilling through lockable, removable front panel with fall protection.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts and front panel can be replaced as modules.
Installation dimensions: 150 x 450 x 110 mm
Mounting: With four screws in wall opening through fixing holes in the side walls.
Delivery includes fixing material and first fill with soap.

Weight (in kg): 3,0

Tootekood: WAG-WP208-7S , Tarneaeg: 14 päeva

415,40 €

Vahudosaator 400ml+Kätepaberidosaator 250 lk+prügikast 11L

COMBINATION PAPER TOWEL- AND FOAM SOAP DISPENSER AND WASTE BIN WP 500-5

298 x 1348 x 120 mm
ca. 250 paper towels / 400 ml foam soap concentrate / 11 l

Combination consisting of a foam soap dispenser, a paper towel dispenser and a waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below.
Foam soap dispenser with one-hand operated and non-drip foam soap pump.
Designed for standard 400 ml foam soap concentrate.
Paper towel dispenser with deep-drawn paper removal opening for easy paper removal.
Designed for approx. 250 standard paper towels in zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Inspection slots to indicate fill level.
Accessible for refilling through lockable front flap with fall protection.
Waste bin equipped with removable mesh basket. Capacity approx. 11 l. Accessible through lockable door with self-closing, flame-retardant disposal flap.
Keyed alike cylinder locks in corrosion-resistant zinc die-casting.
Wear parts and front panels can be replaced as modules.
Installation dimensions: 300 x 1350 x 110 mm
Mounting: With eight screws in wall opening through fixing holes in the side walls.
Delivery includes fixing material, first fill with soap and one pack of paper towels.

Weight (in kg): 14,9

Tootekood: WAG-WP500-5S , Tarneaeg: 14-21 päeva

1370,20 €

Automatne kummikute pesur harjaga, 220V, 50Hz

RMO 02

automatic washing system for wellingtons

RMO 02 is a stainless steel sensor-controlled washing system with rotary brushes for wellingtons. A built-in photocell sensor reacts to the user holding the handrail. The electromagnetic valve switches on, opens the water inlet, the brushes start to rotate and the circular jet injection of the disinfecting lotion is carried out. After placing the foot with the wellington on the grid in between the rotary brushes, the sole is cleaned by means of the horizontal brush and the leg portion is cleaned by means of two vertical brushes. The system is automatically switched off when the user releases the handrail. There is a CENTRAL/STOP button on the handrail for emergency switch-off.
The washing system is intended for free standing installation on the floor. Imperfections of the floor are balanced out by four adjustable hobs. The construction of the system allows the outlet to be placed above the floor level.
The RMO 02 washing system, with its easy maintenance, is mainly intended for operations where quick removal of mechanical dirt from wellingtons is required.
The canister with disinfecting solution is not part of the delivery.

Package contents

body of the washing machine
removable grid
electronics with photocell
three rotary brushes
jerican holder
priming hose
adjustable supporting legs
central stop button

Radius of sensor	0,7 m
Water inlet	G 1/2“
Water pressure	0,1 – 1,0 MPa
Outlet	G 6/4”
Electricity protection	IP 55
Power supply	230 V, 50 Hz
Power requirement	370 W
Water temperature	max. 42°C
Weight	95 kg

Set up water inlet as per picture
Set up outlet G 6/4” via effluvial cover
Set up cable for power supply – 230 V, 50 Hz

Tootekood: AZP-RMO 02 , Tarneaeg: 3-5 nädalat , Viimistlus:

16560,10 €

Seebidosaatori pudel Mediclinics DJ0040 pumbaga

Seebidosaatori pudel

Tootekood: MRCDJ0040-VDT , Tarneaeg: 7-14 päeva , Viimistlus:

55,90 €