Seebidosaator senasisene 1000ml , R/V teras poleeritud Wagner Ewar WP106P
Kaubamärk:
Ühik: tk
Tarneaeg: 14 päeva
‼️ Kasuta promokoodi SUVI2026 ostukorvis ja saa soodustust – ainult täna!
▼ Loe edasi: ...
✅ Populaarsed tooted Tallinna laos kohe olemas — tarneaeg 1–3 päeva või tule ise järele.
✅ Kui toode on tellimisel, uuri lähemalt — saame tihti pakkuda oodatust kiiremat tarnet: info@pegu.ee
✅ Kõikidele toodetele garantii 2 aastat ja 14‑päevane tagastusõigus.
✅ Automaatne arve e‑postile. E‑arve soovijatel palume lisada märge kommentaaridesse.
ℹ️ Hind sisaldab käibemaksu.
Seebidosaator senasisene 1000ml , R/V teras poleeritud Wagner Ewar WP106P
LIQUID SOAP DISPENSER WP 106
148 x 148 x 120 mm
1000 ml soap tank
- Liquid soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - One-hand operated and non-drip soap pump with 1000 ml tank and pressure valve in brass.
- Tank with large, lockable refill opening.
- Designed for standard liquid soaps.
- Accessible for refilling through lockable, removable front panel with fall protection.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Installation dimensions: 150 x 150 x 110 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material.
- Weight (in kg): 2,0
Failid
Raam Seebidosaatorile senasisene WP106S, R/V teras satiin Wagner Ewar 768970
WP 106 COVERING FRAME 768970
for 148 x 148 mm
78,00 €
WC paberi suure rulli hoidik, satiin Wagner Ewar WP163S
WC paberi suure rulli hoidik
R/V teras AISI 303, satiin
Wagner Ewar
WC paberi suure rulli hoidik
R/V teras AISI 303, satiin
Wagner Ewar
- Large roll dispenser in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; visible surfaces satin finished and brushed.
Further available surfaces: see below. - Designed for one standard large roll with dimensions:
Outer diameter max. 280 mm
Width max. 100 mm
Core diameter min. 40 mm - Spring pressure plate to prevent unintended unrolling.
- Inspection slot to indicate fill level.
- Accessible for refilling through lockable, hinged housing.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material.
- Can be converted to WP163-S at a later time: Conversion kit ID 923 290.
- Weight (in kg): 4.8
472,00 €
Damixa seebidosaator 75mm otsik, kroom
4800500
75 mm otsik
76,23 €
Prügikast 80L, R/V teras Mediclinics
PP1080CS
harjatud, R/V teras AISI304
Seibale või põrandale
399,00 €
Mähkimislaud, horisontaalne, R/V tears seinasisene Wagner Ewar
WP2010S
Nappy changer WP2010
- Nappy changer in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed, handle strip with glossy surface.
Further available surfaces: see below. - Easy to open and close with maintenance free lifting mechanism supported by gas struts.
- Table surface in grey polypropylene, molded, without any visible fixtures.
- Intended for use with paper overlays.
- TÜV-tested and certified according to
EN 12221-1:2013
EN 12221-2:2013
AfPS GS 2019:01 PAK - Test load 150 kg. Approved for private use:
Load capacity up to 11 kg / age up to 1 year. - Wear parts can be replaced as modules.
- Installation dimensions: 902 x 568 x 110 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material.
- Weight (in kg): 25.1
2851,00 €
Vedelseebidosaator R/V teras, matt 0,5 ml pudeliga Wagner Ewar WP101S
Seebidosaator
harjatud, R/V teras AISI304
Maht 950ml
Liquid soap dispenser WP101
- Liquid soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - One-hand operated and non-drip soap pump.
- Designed for standard 500 ml bottles of liquid soap or hand lotion.
- Inspection slot to indicate fill level.
- Accessible for refilling through lockable, hinged housing.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With two screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material and first fill with soap.
- Weight (in kg): 1.7
329,00 €






