Wall-mounted twin hole mixer with swivelling, tubular under spout Ø 22mm L. 200mm with star-shaped brass flow straightener. 
Water-free, guided valve heads with reinforced mechanisms. 
Shock-resistant, ergonomic ball levers. 
Flow rate 60 lpm at 3 bar achieved within 90°. 
Full flow rate 90 lpm at 3 bar. 
Spout with smooth interior. 
One-piece body and spout made from chrome-plated brass. 
M1/2" M3/4" offset connectors supplied with escutcheons. 
Suitable for disposal sinks. 

Group thermostatic mixing valve for hot water circulating loops adjustable from 44°C to 58°C: 
Anti-scalding safety. 
Regulates temperature variations. 
Non-return valves and filters accessible from the exterior without having to remove the mechanism.
Thermal shocks are possible. 
Interchangeable cartridge with automotive cell. 
High-resistance chrome-plated brass body. 
Maximum hot water temperature: 85°C. 
Differential hot water / mixed water: 15°C minimum. 
Pressure differences at the inlets: 1 bar maximum (0.5 bar recommended). 
Minimum pressure / maximum: 1 to 10 bar (1 to 5 bar recommended). 
Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring). 
Mixed water outlet at the top (purple ring) for bottom outlet: unscrew / place lid at the top and outlet connector at the bottom. 
15% energy savings: optimised heat loss (comparison between a circulating loop at 55°C and a non-circulating system at 70°C). 
Safety and prolongation of system life span (Hot water at >65°C leads to premature aging within the system). 
Maximum temperature limiter, can be adjusted by the installer. 
Reduced risk of scalding by limiting temperature at the point-of-use. 
140 lpm - M1 1/4 ".