Haceka Aline 2-ne nagi metall, must

• Aluminium 
• 36 x 27 x 87 mm

   

Normbau Verso Care lift-up dušiiste põranda jalaga, 412 x 446mm

Verso Care lift-up shower seat with floor support, 412 x 446mm

Verso Care Shower seat with floor support,
412 x 446 x 482 (128)mm

with positively driven floor support, for seat height 470-500mm, wall bracket made of stainless steel, scratch-resistant powder coating, support bracket made of aluminium, scratch-resistant powder coating, Aluminum floor support, scratch-resistant, seat made of thermoplastic polypropylene, ergonomically visible seat with rounded outer edges, available in NORMBAU colors 018 and 019, with adjustable brake, locked in the upright position, easy construction, maximum loading permitted: 150 kgs, tested, respond TÜV requirement (in accordance
with DIN 18040).

The fixing set should be ordered separately to suit the type of wall.

• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.

• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.

• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.

• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.

• Adjustable power motor to regulate power consumption between 180 and 850 W.

• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).

• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.

• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.

• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.