350 x 580 x 210 mm
1 paper roll + 1 reserve roll

• Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in robust, germ-reducing and easy-care stainless steel (AISI 304).
• All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
  Further available surfaces: see below.
• With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm.
  Paper length and idle time adjustable.
  Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. 
• Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. 
• Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up. 
• Accessible for refilling through lockable door. 
• Keyed alike cylinder lock in corrosion-resistant zinc die-casting. 
• Wear parts and front panels can be replaced as modules.
• Installation dimensions: 352 x 582 x 180 mm
• Mounting: With four screws in wall opening through fixing holes in the side walls. 
• Delivery includes fixing material and first fill with one paper roll.

• Weight (in kg): 12,4

Käterätikuivati on valmistatud messingist. (brass)

Полотенцесушители выполнены из латуни

Sobib nii küttevee kui ka tarbevee süsteemi.

Подходят как для отопительной системы, так и для ГВС

Maksimaalne töörõhk on 600 KPa

Максимальное рабочее давление 600 KPa

Maksimaalne temperatuur 85°C

максимальная температура 85°C

Võimalikud viimistlused Chroom +...%

Возможные покрытия Chroom +...%

140 x 110 x 90 mm
for 1 roll, lockable

• Toilet roll holder in robust, germ-reducing and easy-care stainless steel (AISI 304).
• All-stainless steel construction, visible surfaces satin finished and brushed.
  Further available surfaces: see below.
• Designed for one standard toilet roll with dimensions:
  Outer diameter max. 125 mm
  Width max. 100 mm
  Core diameter min. 38 mm
• Accessible for refilling by unlocking the center axis. 
• Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
• Wear parts can be replaced as modules.
• Mounting: With two screws through fixing holes in the back wall. 
• Delivery includes fixing material.

• Weight (in kg): 0,7