Can be installed into any Vieser low model floor drains.
Vieser 51180 Tõsterõngas 12mm
Kaubamärk:

Ühik: tk
Tarneaeg: 3-7 päeva
Müüja: PEGU OÜ
Kasuta sooduskoodi ja saa soodustust tootele, mis ei osale muudes Maikuu kampaaniates!
✔ Allahindlus ainult Mai kuu jooksul – kiirusta!
✔ Kvaliteetne toode mugavalt ja turvaliselt otse koju
✔ Professionaalne teenindus ja läbipaistev ostukeskkond
Lisa toode ostukorvi, sisesta seal kood PEGU-KEVAD2025 ja saa soodustus toodetele, mis ei kuulu teistesse sama perioodi kampaaniatesse.
Ainult mais – kasuta võimalust, enne kui kampaania lõpeb!
PEGU.ee – tark valik neile, kes hindavad disaini, kvaliteeti ja nutikat ostlemist.
Vieser 51180 Tõsterõngas 12mm
Vieser low model extension ring 12 mm
The package contains the extension ring, a white lip seal, a grey clamping ring and a white support ring.
Please note:
a grey clamping ring is included in the package. The grey clamping ring is meant to be used with this extension ring type only. A white clamping ring is supplied with all other Vieser extension rings and floor drains.
The white lip seal and grey clamping ring are meant to be used with a low extension ring only, and they are not compatible with other Vieser products.
A low extension ring must always be the uppermost extension ring and it cannot be extended with another extension ring.
Video
Kaunis design-lattiakaivon kansi. Kansi on valmistettu Suomessa. Tästä näyttävä yksityiskohta kylpyhuoneeseen, kansi toimii myös tarkoituksenmukaisena viemärikantena.
Kansi ja kehyslaatta ovat valmistettu 2 mm paksuisesta ruostumattomasta teräksestä. Kehyksen korkeutta lattialaatoihin nähden voidaan säätää kiinnityslaastin määrällä.
Kannen vesiaukot ovat aina alle 150mm alueella joten se soveltuu kaikkiin 150mm viemärikaivoihin.
Lattiakaivon kannen lisätiedot:
- Valmistaja: LVI-Pörssi
- Kehyksen ulkomitat: 197 x 197 mm
- Korkeus 4 mm
- Materiaali: ruostumaton teräs (AISI304)
- Väri: teräs
Vieser One 6004513 Horisontaaltrapp EXTRA madal 50 1x32 jalgadega
Vieser One horizontal drain DN50 1x32 extra low with support legs
The lowest floor drain on the market 69 mm
The Vieser One horizontal extra low floor drain is the lowest floor drain on the market, with a flow rate of 1.2 l/s The low structure is a significant benefit in both renovations and new construction.
Thanks to the efficient flow rate, the drain is suitable for use in both showers and bathtubs, and it is compatible with all Vieser drain covers and extension rings. The drain has one 32 mm side inlet.
Water trap based on membrane technology
The water trap is based on innovative membrane technology. The traditional water space is replaced with an airtight membrane water trap that opens as the water flows and closes when it stops, preventing sewer gases from entering the room.
The membrane water trap, made from silicone rubber, has a long life and functions reliably in different temperatures and conditions.
Hygienic and quiet
The membrane water trap of the extra low drain is very hygienic, as it does not collect impurities. Dirt is swept away with the water flow. If necessary, the water trap can be removed and lifted up.
The waterless membrane trap is silent in use. It is also an excellent option for spaces that experience problems with the water trap drying out.
The Vieser One floor drain is compatible with Vieser’s traditional gratings and Vieser’s design covers:
- Vieser Line (linear floor drain system)
- Vieser Dot (design floor drain system)
- Vieser Square (design floor drain system)
- Vieser Corner (corner floor drain system)
The watertightness and proper functioning of Vieser floor drains have been proven through rigorous tests according to the standard EN 1253-2, on which the type approvals granted by RISE are also based.
The package includes the drain, water trap, casting shield, clamping ring, support legs and a tool for installing the clamping ring.
Technical specifications
The floor drain is compatible with Vieser extension rings, distance rings, membrane flange and gratings/covers. The drain has one 32 mm side inlet. The package includes the drain, water trap, casting shield, clamping ring, support legs and a tool for installing the clamping ring.
Vieser One 52610 Horisontaaltrapp 75
Vieser One floor drain DN75 (without support legs)
Suitable for sewerage systems for regular wastewater.
The Vieser One horizontal floor drain is part of the Vieser floor drain system.
The floor drain can be used with a Vieser extension rings, waterproofing flange or gratings.
The package package contains the floor drain, protective lid, a water trap, a seal, a clamping ring and a clamping ring installation tool.
Vieser One floor drain is compatible with Vieser design floor drains:
Vieser One 6004308 Nurgatrapp 75 45° 3x32/40
Vieser One floor drain 45° DN75 3 x 32/40 (without support legs)
Suitable for sewerage systems for regular wastewater.
The Vieser One floor drain is part of the Vieser floor drain system.
The floor drain can be used with a Vieser extension rings, waterproofing flange or gratings.
The drain includes three 32/40 mm side inlets that can be opened.
The package package contains the floor drain, protective lid, a water trap, a seal, a clamping ring and a clamping ring installation tool.
Technical specifications
The floor drain is compatible with Vieser extension rings, distance rings, waterproofing flange and grating system.
The drain includes three 32/40 mm side inlets that can be opened. The package contains the floor drain, a water trap, a seal, a clamping ring and a clamping ring installation tool.
Vieser low flow drain 51908 põrandatrapi spetsiaalne vesilukk