Vieser One 52700 põrandatrapi spetsiaalne vesilukk 3315949
Kaubamärk:
Ühik: tk
Tarneaeg: 3-7 päeva
‼️ Kasuta promokoodi KEVAD2026 ostukorvis ja saa soodustust – ainult täna!
▼ Loe edasi: ...
✅ Populaarsed tooted Tallinna laos kohe olemas — tarneaeg 1–3 päeva või tule ise järele.
✅ Kui toode on tellimisel, uuri lähemalt — saame tihti pakkuda oodatust kiiremat tarnet: info@pegu.ee
✅ Kõikidele toodetele garantii 2 aastat ja 14‑päevane tagastusõigus.
✅ Automaatne arve e‑postile. E‑arve soovijatel palume lisada märge kommentaaridesse.
ℹ️ Hind sisaldab käibemaksu.
Vieser One 52700 põrandatrapi spetsiaalne vesilukk 3315949
Vieser One 52700 põrandatrapi spetsiaalne vesilukk
Vieser One special water trap for drain
A Vieser One special water trap prevents the sewer from drying out and eliminates unpleasant odours. Recommended for rooms where the floor drain is used infrequently or is only used temporarily, such as laundry rooms or summer homes. Compatible with Vieser One floor drains.
Can be installed into any Vieser One floor drain with a water trap also after initial installation. A Vieser One water trap can be identified by its black lifting handle. Recommended for rooms where the floor drain is used infrequently or is only used temporarily, such as technical facilities, laundry rooms or summer homes.
The special drain trap effectively prevents the floor drain from drying up, thus eliminating unpleasant odours.
Related products
Technical specifications
Failid
LVI disain roostevaba trapikaas 197x197x4 JUSSI Punane 3316979
Kaunis design-lattiakaivon kansi. Kansi on valmistettu Suomessa. Tästä näyttävä yksityiskohta kylpyhuoneeseen, kansi toimii myös tarkoituksenmukaisena viemärikantena.
Kansi ja kehyslaatta ovat valmistettu 2 mm paksuisesta ruostumattomasta teräksestä. Kehyksen korkeutta lattialaatoihin nähden voidaan säätää kiinnityslaastin määrällä.
Kannen vesiaukot ovat aina alle 150mm alueella joten se soveltuu kaikkiin 150mm viemärikaivoihin.
Lattiakaivon kannen lisätiedot:
- Valmistaja: LVI-Pörssi
- Kehyksen ulkomitat: 197 x 197 mm
- Korkeus 4 mm
- Materiaali: ruostumaton teräs (AISI304)
- Väri: Punainen
Vieser One 6004512 Horisontaaltrapp EXTRA madal 50 1x32 1.2L/sek 3317307
Vieser One 6004512 Horisontaaltrapp EXTRA madal 50 1x32 1.2L/sek
Vieser One horizontal drain DN50 1x32 extra low
The lowest floor drain on the market 69 mm
The Vieser One horizontal extra low floor drain is the lowest floor drain on the market, with a flow rate of 1.2 l/s The low structure is a significant benefit in both renovations and new construction.
Thanks to the efficient flow rate, the drain is suitable for use in both showers and bathtubs, and it is compatible with all Vieser drain covers and extension rings. The drain has one 32 mm side inlet.
Water trap based on membrane technology
The water trap is based on innovative membrane technology. The traditional water space is replaced with an airtight membrane water trap that opens as the water flows and closes when it stops, preventing sewer gases from entering the room.
The membrane water trap, made from silicone rubber, has a long life and functions reliably in different temperatures and conditions.
Hygienic and quiet
The membrane water trap of the extra low drain is very hygienic, as it does not collect impurities. Dirt is swept away with the water flow. If necessary, the water trap can be removed and lifted up.
The waterless membrane trap is silent in use. It is also an excellent option for spaces that experience problems with the water trap drying out.
The Vieser One floor drain is compatible with Vieser’s traditional gratings and Vieser’s design covers:
The package includes the drain, water trap, casting shield, clamping ring and a tool for installing the clamping ring.
Technical specifications
The floor drain is compatible with Vieser extension rings, distance rings, membrane flange and gratings/covers. The drain has one 32 mm side inlet. The package includes the drain, water trap, casting shield, clamping ring and a tool for installing the clamping ring.
Vieser 51205 Tõsterõngas 25-88mm 3318415
Vieser 51205 Tõsterõngas 25-88mm
Vieser extension ring 25-88mm
Compatible with all Vieser floor drains. Installed below the waterproofing.
Raises the floor drain by 25–88 mm.
The package contains the extension ring, a grey lip seal and a white clamping ring.
Trapikaas plastraamiga 51241 Vieser Modren 197x197 mm RST 3315952
Trapikaas plastraamiga 51241 Vieser Modren 197x197 mm
Roostevaba teras
Vieser Modern - Stainless steel grating with plastic frame – 197×197
For tiled floors on top of the floor drain. Must be installed when tiling the floor. The gap between the floor drain and the square grating may not be sealed.
The package contains a square stainless steel grating and a plastic frame.
Vieser’s drain and cover combination comes with a 10-year system guarantee.
Our stainless steel gratings are fully compatible with
all our drains and extension rings.
(PDF)Vieser round and square grating in tiled floor
(DWG)Vieser round and square grating in tiled floor
Technical specifications
The package contains a square stainless steel grating and a plastic frame.
Our stainless steel gratings are fully compatible with
all our drains and extension rings.
Vieser nurgatrapikaas Corner Core 376 x 376 x 526 RST 3315980
Vieser nurgatrapikaas Corner Core 376 x 376 x 526 RST
Roostavaba teras
Vieser Corner Core triangular floor drain 376 x 376 x 526
An elegant triangular floor drain grating designed and manufactured in Finland, Vieser Corner Core adds a personal touch and a polished look to your bathroom.
The Vieser floor drain is sold separately.
Choose the Vieser floor drain that is right for your Vieser Corner floor drain system
- Compatibility with all Vieser One floor drains means that you can choose either a vertical, horizontal or untrapped floor drain, thereby also guaranteeing quick and easy installation.
- Suitable for both new construction and renovations.
- To facilitate the installation of the tiling, the frame can be adjusted by a maximum of 15 mm off-centre of the floor drain. The total adjustment range is 30 mm.
- The package contains: A triangular, stainless steel Vieser Corner grating, an adjustable steel frame and an easy-to-use installation template.
- The watertightness and proper functioning of the floor drain have been proven in rigorous tests conducted according to the standard EN 1253-2, on which the Vieser One floor drain type approvals are also based. (Vieser One floor drain type approval)
- The compatibility and watertightness of Vieser One floor drains and the liquid-applied waterproofing of wet spaces have been proven in tests conducted according to the standard EN 1253-1, on which Vieser’s product certificates are also based. (Vieser One and Vieser product certificate).
- Compatibility with Vieser One floor drains offers the user an easy-to-remove water trap that is easy to clean and reinstall.
Vieser’s drain and cover combination comes with a 10-year system guarantee.
(PDF)Vieser Corner floor drain system - Tiling example
(DWG)Vieser Corner floor drain system - Tiling example
Technical specifications
The package contains: A triangular, stainless steel Vieser Corner grating, an adjustable steel frame and an installation template.
To facilitate the installation of the tiling, the frame can be adjusted by a maximum of 15 mm off-centre of the floor drain. The total adjustment range is 30 mm.
The Vieser floor drain is sold separately.
Choose the Vieser floor drain that is right for your Vieser Corner floor drain system
