Valamusegistid roostevabast terasest – AISI 316 & AISI 304
Roostevabast terasest valamusegistid – professionaalne valik
PEGU.ee e-poes on saadaval valamusegistid AISI 316 ja AISI 304 roostevabast terasest, mis sobivad ideaalselt nii era- kui ärikasutusse. Need segistid on korrosioonikindlad, vastupidavad ja visuaalselt ajatud. Ideaalne valik projektidele, kus puhtus ja töökindlus on olulised.
Brändid:
-
Vola – Taani disainiklassika
-
D Line – minimalistlik ja vastupidav
-
Wagner Ewar – Saksa roostevaba elegantsus
✔️ Materjal: AISI 304 ja AISI 316 (happekindel)
✔️ Paigaldus: valamule, seinapealne või sisseehitatud
✔️ Sobib: hotellid, haiglad, SPA-d, eramajad, köögid ja avalikud ruumid
Tellimused otse Eesti laost – kiire tarne ja ekspertne tugi!
❓ Otsid õiget toodet, kuid ei ole kindel, mis sobib?
PEGU.ee aitab valida – räägi otse eksperdiga, kellel on 25+ aastat kogemust segistite, dušisüsteemide ja aksessuaaride alal.
Küsi nõu
Elektrooniline valamusegisti 230V, AISI 316 roostevaba teras satiin 230V
Elektrooniline AISI 316L roostevabast terasest valamusegisti, toiteallikaks patarei.
Nähtavad osad harjatud roostevabast terasest Bistaatiline solenoidventiil 6V (välispidine) Infrapunaandur 6V CRP2 liitiumaku (välispidine) Roostevabast terasest painduvad voolikud 1/2” koos tagasilöögiklappidega
HV1+170
Pipe size: 10 mm.
Hole cut out size: 32 mm.
Köögisegisti QTOO stainless steel AISI316 - PVD messing poleeritud
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
Köögisegisti QTOO stainless steel AISI316 - PVD messing satin
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
Köögisegisti QTOO stainless steel AISI316 - PVD must poleeritud
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
Köögisegisti QTOO stainless steel AISI316 - PVD must satiin
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
Köögisegisti QTOO stainless steel AISI316 - PVD vask poleeritud
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
Köögisegisti QTOO stainless steel AISI316 - PVD vask satiin
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
Köögisegisti QTOO stainless steel AISI316 - steel polished
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
Köögisegisti QTOO stainless steel AISI316 - steel satin
PRODUCT:
Kitchen tap in marine grade stainless steel. Conforms to CSA with min. 500.000 operation cycles securing long life span.
PRODUCT SPECIFICATION
7 7/8”_200mm projection
Swivel spout
Built-in aerator
Total height 11”_280mm
Height to aerator 6 3/32”_155mm
2x 3/8” flexible supply lines
Water flow rate limited to max. 2.2 gpm_8.4 ltr. Marine grade stainless steel AISI316
Lead free compliant
PVD colours:
Satin brass (MP3) - Satin copper (MP2) - Satin Charcoal (MP4) - Polished brass (PP3) - Polished copper (PP2) - Polished Charcoal (PP4)
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI 316. To sustain the unique d line finish appearance please follow the below instructions: ● Wash down the surfaces using soapy water or mild detergent
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning products as these may damage the surface.
If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities in the environment, aggressive conditions or improper or insufficient cleaning
BASIN TAP WA 110
Ø 45 x 283 x 155 mm
normal pressure
- Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
- Version: normal pressure. Operating pressure 2–6 bar.
- Solid stainless steel body; visible surfaces satin finished.
Further available surfaces: see below. - High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
- Neoperl® air bubble spray M21 x 1 mm.
- Design height: 283 mm
Outlet height: 199 mm
Projection: 98 mm
Length of lever: 40 mm - Wear parts can be replaced as modules.
- Installation dimensions: Ø 33-40 mm
Surface thickness max. 40 mm - Mounting: With one counternut.
- Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
- Weight (in kg): 1,70
| AVAILABLE SURFACES | ORDER NUMBERS |
|---|---|
| satin finished (standard) | 925266 |
| highly polished | 932266 |
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: normal pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 283 x 155 mm
Outlet height 199 mm
Projection 98 mm
Length of lever 40 mm
Article No. WA110
BASIN TAP WA 110
Ø 45 x 283 x 155 mm
normal pressure
- Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
- Version: normal pressure. Operating pressure 2–6 bar.
- Solid stainless steel body; visible surfaces satin finished.
Further available surfaces: see below. - High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
- Neoperl® air bubble spray M21 x 1 mm.
- Design height: 283 mm
Outlet height: 199 mm
Projection: 98 mm
Length of lever: 40 mm - Wear parts can be replaced as modules.
- Installation dimensions: Ø 33-40 mm
Surface thickness max. 40 mm - Mounting: With one counternut.
- Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
- Weight (in kg): 1,70
| AVAILABLE SURFACES | ORDER NUMBERS |
|---|---|
| satin finished (standard) | 925266 |
| highly polished | 932266 |
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: normal pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 283 x 155 mm
Outlet height 199 mm
Projection 98 mm
Length of lever 40 mm
Article No. WA110
BASIN TAP WA 210
Ø 45 x 283 x 155 mm
low pressure
- Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
- Version: low pressure, suitable for unpressurised tanks. Operating pressure 2–6 bar.
- Solid stainless steel body; visible surfaces satin finished.
Further available surfaces: see below. - High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
- Neoperl® air bubble spray M21 x 1 mm.
- Design height: 283 mm
Outlet height: 199 mm
Projection: 98 mm
Length of lever: 40 mm - Wear parts can be replaced as modules.
- Installation dimensions: Ø 33-40 mm, surface thickness max. 40 mm
- Mounting: With one counternut.
- Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
- Weight (in kg): 2,00
| AVAILABLE SURFACES | ORDER NUMBERS |
|---|---|
| satin finished (standard) | 925267 |
| highly polished | 932267 |
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: low pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 283 x 155 mm
Outlet height 199 mm
Projection 98 mm
Length of lever 40 mm
Article No. WA210
BASIN TAP WA 210-1
Ø 45 x 283 x 185 mm
low pressure
- Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
- Version: low pressure, suitable for unpressurised tanks. Operating pressure 2–6 bar.
- Solid stainless steel body; visible surfaces satin finished.
Further available surfaces: see below. - High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
- Neoperl® air bubble spray M21 x 1 mm.
- Design height: 283 mm
Outlet height: 199 mm
Projection: 98 mm
Length of lever: 140 mm - Wear parts can be replaced as modules.
- Installation dimensions: Ø 33-40 mm, surface thickness max. 40 mm
- Mounting: With one counternut.
- Delivery includes fixing material and three flexiblen, stainless steel covered connecting tubes.
- Weight (in kg): 2,00
| AVAILABLE SURFACES | ORDER NUMBERS |
|---|---|
| satin finished (standard) | 925277 |
| highly polished | 932277 |
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: low pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 283 x 185 mm
Outlet height 199 mm
Projection 98 mm
Length of lever 140 mm
Article No. WA210-1
BASIN TAP WA 210
Ø 45 x 283 x 155 mm
low pressure
- Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
- Version: low pressure, suitable for unpressurised tanks. Operating pressure 2–6 bar.
- Solid stainless steel body; visible surfaces satin finished.
Further available surfaces: see below. - High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
- Neoperl® air bubble spray M21 x 1 mm.
- Design height: 283 mm
Outlet height: 199 mm
Projection: 98 mm
Length of lever: 40 mm - Wear parts can be replaced as modules.
- Installation dimensions: Ø 33-40 mm, surface thickness max. 40 mm
- Mounting: With one counternut.
- Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
- Weight (in kg): 2,00
| AVAILABLE SURFACES | ORDER NUMBERS |
|---|---|
| satin finished (standard) | 925267 |
| highly polished | 932267 |
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: low pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 283 x 155 mm
Outlet height 199 mm
Projection 98 mm
Length of lever 40 mm
Article No. WA210
BASIN TAP WA 210-1
Ø 45 x 283 x 185 mm
low pressure
- Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
- Version: low pressure, suitable for unpressurised tanks. Operating pressure 2–6 bar.
- Solid stainless steel body; visible surfaces satin finished.
Further available surfaces: see below. - High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
- Neoperl® air bubble spray M21 x 1 mm.
- Design height: 283 mm
Outlet height: 199 mm
Projection: 98 mm
Length of lever: 140 mm - Wear parts can be replaced as modules.
- Installation dimensions: Ø 33-40 mm, surface thickness max. 40 mm
- Mounting: With one counternut.
- Delivery includes fixing material and three flexiblen, stainless steel covered connecting tubes.
- Weight (in kg): 2,00
| AVAILABLE SURFACES | ORDER NUMBERS |
|---|---|
| satin finished (standard) | 925277 |
| highly polished | 932277 |
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: low pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 283 x 185 mm
Outlet height 199 mm
Projection 98 mm
Length of lever 140 mm
Article No. WA210-1
BASIN TAP WA 200
Ø 45 x 170 x 155 mm
low pressure
- Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
- Version: low pressure, suitable for unpressurised tanks. Operating pressure 2–6 bar.
- Solid stainless steel body; visible surfaces satin finished.
Further available surfaces: see below. - High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
- Neoperl® air bubble spray M21 x 1 mm.
- Design height: 171 mm
Outlet height: 87 mm
Projection: 98 mm
Length of lever: 40 mm - Wear parts can be replaced as modules.
- Installation dimensions: Ø 33-40 mm
Surface thickness max. 40 mm - Mounting: With one counternut.
- Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
- Weight (in kg): 1,90
| AVAILABLE SURFACES | ORDER NUMBERS |
|---|---|
| satin finished (standard) | 924267 |
| highly polished | 931267 |
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: low pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 171 x 155 mm
Outlet height 87 mm
Projection 98 mm
Length of lever 40 mm
Article No. WA200
BASIN TAP WA 200-1
Ø 45 x 170 x 185 mm
low pressure
- Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
- Version: low pressure, suitable for unpressurised tanks. Operating pressure 2–6 bar.
- Solid stainless steel body; visible surfaces satin finished.
Further available surfaces: see below. - High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
- Neoperl® air bubble spray M21 x 1 mm.
- Design height: 171 mm
Outlet height: 87 mm
Projection: 98 mm
Length of lever: 140 mm - Wear parts can be replaced as modules.
- Installation dimensions: Ø 33-40 mm
Surface thickness max. 40 mm - Mounting: With one counternut.
- Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
- Weight (in kg): 1,90
| AVAILABLE SURFACES | ORDER NUMBERS |
|---|---|
| satin finished (standard) | 924277 |
| highly polished | 931277 |
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: low pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 171 x 185 mm
Outlet height 87 mm
Projection 98 mm
Length of lever 140 mm
Article No. WA200-1
BASIN TAP WA 200
Ø 45 x 170 x 155 mm
low pressure
- Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
- Version: low pressure, suitable for unpressurised tanks. Operating pressure 2–6 bar.
- Solid stainless steel body; visible surfaces satin finished.
Further available surfaces: see below. - High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
- Neoperl® air bubble spray M21 x 1 mm.
- Design height: 171 mm
Outlet height: 87 mm
Projection: 98 mm
Length of lever: 40 mm - Wear parts can be replaced as modules.
- Installation dimensions: Ø 33-40 mm
Surface thickness max. 40 mm - Mounting: With one counternut.
- Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
- Weight (in kg): 1,90
| AVAILABLE SURFACES | ORDER NUMBERS |
|---|---|
| satin finished (standard) | 924267 |
| highly polished | 931267 |
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: low pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 171 x 155 mm
Outlet height 87 mm
Projection 98 mm
Length of lever 40 mm
Article No. WA200
BASIN TAP WA 200-1
Ø 45 x 170 x 185 mm
low pressure
- Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
- Version: low pressure, suitable for unpressurised tanks. Operating pressure 2–6 bar.
- Solid stainless steel body; visible surfaces satin finished.
Further available surfaces: see below. - High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
- Neoperl® air bubble spray M21 x 1 mm.
- Design height: 171 mm
Outlet height: 87 mm
Projection: 98 mm
Length of lever: 140 mm - Wear parts can be replaced as modules.
- Installation dimensions: Ø 33-40 mm
Surface thickness max. 40 mm - Mounting: With one counternut.
- Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
- Weight (in kg): 1,90
| AVAILABLE SURFACES | ORDER NUMBERS |
|---|---|
| satin finished (standard) | 924277 |
| highly polished | 931277 |
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: low pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and three flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 171 x 185 mm
Outlet height 87 mm
Projection 98 mm
Length of lever 140 mm
Article No. WA200-1
BASIN TAP WA 100-1
Ø 45 x 170 x 185 mm
normal pressure
- Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
- Version: normal pressure. Operating pressure 2–6 bar.
- Solid stainless steel body; visible surfaces satin finished.
Further available surfaces: see below. - High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
- Neoperl® air bubble spray M21 x 1 mm.
- Design height: 171 mm
Outlet height: 87 mm
Projection: 98 mm
Length of lever: 140 mm - Wear parts can be replaced as modules.
- Installation dimensions: Ø 33-40 mm
Surface thickness max. 40 mm - Mounting: With one counternut.
- Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
- Weight (in kg): 1,60
| AVAILABLE SURFACES | ORDER NUMBERS |
|---|---|
| satin finished (standard) | 924276 |
| highly polished | 931276 |
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: normal pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 171 x 185 mm
Outlet height 87 mm
Projection 98 mm
Length of lever 140 mm
Article No. WA100-1
BASIN TAP WA 100-1
Ø 45 x 170 x 185 mm
normal pressure
- Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
- Version: normal pressure. Operating pressure 2–6 bar.
- Solid stainless steel body; visible surfaces satin finished.
Further available surfaces: see below. - High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
- Neoperl® air bubble spray M21 x 1 mm.
- Design height: 171 mm
Outlet height: 87 mm
Projection: 98 mm
Length of lever: 140 mm - Wear parts can be replaced as modules.
- Installation dimensions: Ø 33-40 mm
Surface thickness max. 40 mm - Mounting: With one counternut.
- Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
- Weight (in kg): 1,60
| AVAILABLE SURFACES | ORDER NUMBERS |
|---|---|
| satin finished (standard) | 924276 |
| highly polished | 931276 |
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: normal pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 171 x 185 mm
Outlet height 87 mm
Projection 98 mm
Length of lever 140 mm
Article No. WA100-1
BASIN TAP WA 100-1
Ø 45 x 170 x 185 mm
normal pressure
- Single-lever basin tap without waste fitting in robust, germ-reducing and easy-care stainless steel (AISI 303).
- Version: normal pressure. Operating pressure 2–6 bar.
- Solid stainless steel body; visible surfaces satin finished.
Further available surfaces: see below. - High quality ceramic mixer cartridge with adjustable temperature limit setting (scald protection).
- Neoperl® air bubble spray M21 x 1 mm.
- Design height: 171 mm
Outlet height: 87 mm
Projection: 98 mm
Length of lever: 140 mm - Wear parts can be replaced as modules.
- Installation dimensions: Ø 33-40 mm
Surface thickness max. 40 mm - Mounting: With one counternut.
- Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
- Weight (in kg): 1,60
| AVAILABLE SURFACES | ORDER NUMBERS |
|---|---|
| satin finished (standard) | 924276 |
| highly polished | 931276 |
Single-lever basin tap in stainless steel (AISI 303) for counter mounting. Version: normal pressure. Solid stainless steel body; visible surfaces satin finished. Ceramic mixer cartridge with adjustable temperature limit setting. Delivery includes fixing material and two flexible connecting hoses clad in stainless steel.
Dimensions: Ø 52 x 171 x 185 mm
Outlet height 87 mm
Projection 98 mm
Length of lever 140 mm
Article No. WA100-1
mounting 500, with swivel spout 090H and water saving
aerator. Height 265 mm.
Hole cut out size, mixer: 42 mm.
Hole cut out size, spout: 22 mm.
KV15
Inlet/Outlet: ½".
Hole cut out size, valves: 30 mm.
Hole cut out size, spout: 22 mm.
Süvistatav kangsegisti pööratava 250 mm jooksutoruga
Keskmine käepide
131M
One-handle build-in mixer with ceramic disc technology.131MUP = Mixer 100. 131MAP = Handle NR28M, 250 mm double swivel spout 030, 60 mm circular flanges 001, 3001.
Ada approved.
Kangsegisti keraamilise töörganiga
Kahes suuna pööratava jooksutoruga.
Paigaldusava:42mm, jooksutorule: 22mm
Kangsegisti keraamilise töörganiga
Kahes suuna pööratava jooksutoruga.
Paigaldusava:42mm, jooksutorule: 22mm
Vola Valamu kangsegisti HV1, harjatud roostevaba teras
Kangsegisti keraamilise töörganiga
Jäik jooksutoru vett säästva aeraatoriga.
