Antivandaalne Peegel R/V teras 385x485 AISI304 DELABIE 3452

Antivandaalne Peegel R/V teras 385x485 AISI304 DELABIE 3452

Tootekood: DE-3452
Kaubamärk:

Ühik: tk
Tarneaeg: 7-21 päeva

‼️ Kasuta promokoodi TALV2026 ostukorvis ja saa soodustust – ainult täna!

✅ Enamik populaarseid tooteid on Tallinna laos kohe olemas — tarneaeg 1–3 päeva või ise järeletulemine.

✅ Kui toode on tellimisel, kontrolli tarneaega või küsi täpsust e-postil: info@pegu.ee

✅ Kõikidele toodetele kehtib garantii 2 aastat. Tavakaupadele (ilma eritellimuseta) tagastusõigus 14 päeva.

✅ Automaatne arve saatmine e-postile nii era- kui äriklientidele. E-arve soovijatel palume lisada märge kommentaaridesse.

kuumaks al. 23,76 €

Hind:

279,51 €

Kuumakse alates: 23,76 €

Antivandaalne Peegel R/V teras 385x485 AISI304 DELABIE 3452

Stainless steel rectangular mirror, H. 500mm
Ref. 3452

Depth	10mm
Length	Unbreakable mirror
Width	385mm
Drop height	485mm
Finish	"Mirror" polished 304 stainless steel

Failid

US_eng_3452.pdf

Sarnased tooted

Soodus

Peegel UNU ümar konksuga, vask Frost U4120-C

Small round UNU mirror with hook.

Height: 160mm

Width: 120mm

Depth: 38mm

Diameter: Ø120mm

Weight: 0,2 kg.

Designer: Bønnelycke mdd

Material: Aluminium

Tootekood: FROOU4120-C , Tarneaeg: 14-21 päev , Viimistlus:

38,62 € (5%)
40,66 €

Soodus

Peegel UNU konksuga, vask Frost U4121-C

Small rectangular UNU mirror with hook.

Height: 160mm

Width: 80mm

Depth: 38mm

Weight: 0,2 kg.

Designer: Bønnelycke mdd

Material: Aluminium

Tootekood: FROU4121-C , Tarneaeg: 14-21 päev , Viimistlus:

38,62 € (5%)
40,66 €

Soodus

BUKTO peegel H1058x300mm, must Frost U6008-B

Rectangular mirror. Mounted on BUKTO clothes stand. Available in black and white

Height: 1058mm

Width: 300mm

Weight: 5 kg.

Designer: Bønnelycke mdd

Tootekood: FROU6008-B , Tarneaeg: 14-21 päev , Viimistlus:

107,18 € (5%)
112,82 €

AZP Brno adapter 1-3 punkte ZAC 1-20

	ZAC 1/20, ZAC 1/50, ZAC 1/36L power supply

ZAC is a safe source of voltage supply intended to power automatic sanitary equipment made by AZP Brno, Ltd.

The source of power supply consists of a safety transformer produced in accordance with ČSN IEC 742+A1 standards. All kinds of sensors can be connected to these sources in random combinations, as can other devices with a supply voltage of 12 V, 50 Hz (total power requirement either 20 VA, 50 VA or 36 VA).

ZAC 1/20 and ZAC 1/50 are independent sources, 1/36L ZAC is the source for the location on the DIN-rail (4 modules).

Version types
ZAC 1/20 - source of power supply with output 20 VA
ZAC 1/50 - source of power supply with output 50 VA
ZAC 1/36L - source of power supply with output 36 VA

Source of power supply can be placed at a maximum distance of 30 m from the connected appliance.

Basic technical information
Input voltage:	230 V, 50 Hz
Output voltage:	12 V, 50 Hz
Power requirement:	20 VA (ZAC 1/20)
	50 VA (ZAC 1/50)
	36 VA (ZAC 1/36L)
Electricity protection:	IP 55 (ZAC 1/20, ZAC 1/50)
	IP 20 (ZAC 1/36L)
Weight:	0,8 kg (ZAC 1/20, ZAC 1/36L)
	1,2 kg (ZAC 1/50)

Requirements for setting up the construction

ZAC 1/20, ZAC 1/50

Set-up supply of electricity 230 V,50 Hz – cable CYKY 3Cx1,5
Set-up niche for flush mounting – size as per installed source
Distribution to each device is carried out by cable CYKY 2Ax1,5

ZAC 1/36 L

It is installed on the DIN-rail - width of 4 modules

Figure
ZAC 1/20

ZAC 1/50

Product title

ZAC 1/20 -

power supply for up to 3 devices - 230V, 50Hz

ZAC 1/50 -

power supply for up to 8 devices - 230V, 50Hz

ZAC 1/36L -

power supply for up to 6 devices - 230V, 50Hz

Tootekood: AZP-ZAC 1-20 , Tarneaeg: 3-4 nädalad , Viimistlus:

106,72 €

Automatne kummikute pesur düüsiga, 12V, 50Hz RST AZP Brno AMO 01

Automatne kummikute pesur düüsiga, 12V, 50Hz

automatic washing system for wellingtons with jets - 12V, 50Hz

AMO 01 is a stainless steel automatic washing system for wellingtons with sensor-controlled water nozzles. When stepping into the washing chamber of the system (scanning zone) water starts to flow from the nozzles automatically and wellingtons are cleaned of dirt. Water stops flowing with a certain time delay after the foot has been removed from the scanning zone.
AMO 01 is designed for a single pipe inlet of pre-mixed water from the circulation or water pre-mixed by means of a thermostatic valve.
The AMO 01 automatic washing system is intended mainly for operations with slight shoe contamination where quick washing at maximum water savings is guaranteed.

Package contents

body of the washing machine
photocell head
nozzles – 8 pcs
electromagnetic valves 2 pcs
corner valves with filter
connecting hoses

Radius of sensor	0 – 0,4 m
Water inlet	G 1/2“
Water pressure	0,3 – 1,0 MPa
Outlet	d = 32 mm
Inner dimensions of the trough	250 x 400 x 280 mm
Electricity protection	IP 55
Power supply	12 V, 50 Hz
Power requirement	10 VA
Source of power supply	ZAC 1/20 (max. 2 x AMO 01)
	ZAC 1/50 (max. 5 x AMO 01)
Weight	18 kg

Set up water inlet as per picture
Set up outlet d = 32 mm
Set up cable for power supply – 12 V, 50 Hz from source of power supply ZAC

Tootekood: AZP-AMO 01 , Tarneaeg: 3-5 nädalat , Viimistlus:

2444,43 €

Antivandaalne Peegel R/V teras 385x485 AISI304 DELABIE 3452

Failid

Peegel UNU ümar konksuga, vask Frost U4120-C

Peegel UNU konksuga, vask Frost U4121-C

BUKTO peegel H1058x300mm, must Frost U6008-B

AZP Brno adapter 1-3 punkte ZAC 1-20

ZAC 1/20, ZAC 1/50, ZAC 1/36L

power supply

Automatne kummikute pesur düüsiga, 12V, 50Hz RST AZP Brno AMO 01

Package contents

Info

Muu

Minu konto

Kontakt