Be-line removable lift-up shower seat for people with reduced mobility. 
Large model. 
Removable: easy to remove with anti-theft locking system. Reduces the number of shower seats in a facility, allowing installation only when required e.g. hotels or hospitals providing short-term accommodation for people with reduced mobility. 
Retained in upright position. Slowed down descent. 
Suitable for intensive use in public places or the healthcare sector. 
Solid, reinforced seat made from high strength polymer which can be installed, without a supporting leg, on any suitable wall. 
Non-slip surface. 
Metallised anthracite powder-coated aluminium provides a good visual contrast with the wall. 
Solid aluminium mounting bracket. 
5 concealed fixing points. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Dimensions: 455 x 450 x 90mm. 
Folded dimensions: 85 x 470mm. 
Tested to over 200kg. Maximum recommended user weight: 135kg. 

Be-Line drop-down support rail for people with reduced mobility. 
In the lowered position use as a grab bar, as a support for standingand for assisting movement, for WCS or showers. 
Allows side access in the raised position.
Removable: easy to remove with anti-theft locking system. Reduces the number of barsin a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility. 
Slowed down descent. Retained in upright position. 
Aluminium tube. 
Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Matte white powder-coated aluminium finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
Concealed fixings secured to wall by a 304 stainless steel plate, 5mm thick. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Dimensions: 650 x 210 x 120mm. 
Tested to over 200kg. Maximum recommended user weight: 135kg. 

TECHNICAL FEATURES 

Be-Line drop-down support rail, L. 650mm, white 
Ref. 511960W

Be-Line drop-down support rail for people with reduced mobility. 
In the lowered position use as a grab bar, as a support for standingand for assisting movement, for WCS or showers. 
Allows side access in the raised position.
Removable: easy to remove with anti-theft locking system. Reduces the number of barsin a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility. 
Retained in upright position. Slowed down descent. 
Aluminium tube. 
Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Matte white powder-coated aluminium finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
Concealed fixings secured to wall by a 304 stainless steel plate, 5mm thick. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Leg provides additional reinforcement when wall fixings are not enough.
Dimensions: 650 x 825 x 120mm. 
Leg height can be adjusted from 760 - 780mm.
Tested to over 200kg. Maximum recommended user weight: 135kg. 

TECHNICAL FEATURES 

Be-Line drop-down support rail with leg, L. 650mm, white 
Ref. 511962W

Be-line® straight bar Ø 35mm with sliding shower head holder for people with reduced mobility. 
Can be used as a vertical grab bar and a shower head rail for showers or baths. 
Metallised anthracite aluminium sliding shower head holder with ergonomic locking ring. 
Possible to add a sliding soap dish (order separately).
Aluminium tube thickness 3mm. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Metallised anthracite powder-coated finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the barand the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Height: 1,050mm. 
Tested to over 200kg. Maximum recommended user weight: 135kg. 

Technical features 

Be-line® anthracite shower grab bar with sliding shower head holder 
Ref. 511946C

Be-line corner grab bar with sliding vertical bar Ø 35mm, for showers. 
Use as a grab bar and to support the user in an upright position. 
Helps and secures entry and movement in the shower. 
Use as a shower rail by adding a sliding shower head holder and/or soap dish. 
Upright position can be adjusted during installation: can be moved to the left or the right in order to adapt the space(positioning of shower, depth of shower seat...). 
Dimensions: 1,130 x 695 x 6950mm. 
Aluminium tube thickness 3mm. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Metallised anthracite powder-coated finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Tested to over 200kg. Maximum recommended user weight: 135kg. 

Technical features 

Be-line corner grab bar with sliding vertical bar 
Ref. 511949C