Delabie composite Inva Valamu segistiavadega MINERALCAST PMR L785 d35mm 132306
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
‼️ Kasuta promokoodi SUVI2026 ostukorvis ja saa soodustust – ainult täna!
▼ Loe edasi: ...
✅ Populaarsed tooted Tallinna laos kohe olemas — tarneaeg 1–3 päeva või tule ise järele.
✅ Kui toode on tellimisel, uuri lähemalt — saame tihti pakkuda oodatust kiiremat tarnet: info@pegu.ee
✅ Kõikidele toodetele garantii 2 aastat ja 14‑päevane tagastusõigus.
✅ Automaatne arve e‑postile. E‑arve soovijatel palume lisada märge kommentaaridesse.
ℹ️ Hind sisaldab käibemaksu.
Delabie composite Inva Valamu segistiavadega MINERALCAST PMR L785 d35mm 132306
Wall mounted MINERALCAST PMR washbasin
Ref. 132306
Wall-mounted washbasin, 785 x 545 x 150mm.
With integral side grips, can be used to support user or as a towel rail.
Sleek and fluid lines.
MINERALCAST: a composite material consisting of natural minerals and polyester resin.
Suitable for use in public and commercial places and the healthcare sector.
Shallow washbasin ideal for people with reduced mobility.
Uniform, non-porous surface is easy to clean.
One-piece pressed washbasin, seam-free, for easy maintenance and better hygiene.
Warm to the touch.
With Ø 35mm central tap hole.
Without overflow.
Supplied with fixing elements.
White, RAL 9016.
Weight: 21.5 kg.
Failid
Delabie SECURITERM EP BIOSAFE segisti H95 pikendatud käepide inva kroom 26216EP
SECURITHERM EP BIOSAFE pressure-balancing basin mixer
Ref. 26216EP
SECURITHERM basin mixer H. 95mm L. 110mm with pressure balancing.
No spout: BIOSAFE hygienic outlet integrated into the body.
Anti-scalding safety: HW flow rate is reduced if CW supply fails.
Securitouch thermal insulation prevents burns.
Ø 35mm ceramic cartridge with pressure balancing.
Pre-set maximum temperature limiter.
Thermal shocks are possible without removing the control lever or shutting off the cold water supply.
Body with smooth interior and very low water volume (reduces bacterial development).
Flow rate limited to 4 lpm at 3 bar.
Solid control lever.
Mixer without pop-up waste.
Reinforced fixing via two stainless steel rods.
Supplied with copper tails and Ø 15mm stopcocks.
TECHNICAL FEATURES
SECURITHERM EP BIOSAFE pressure-balancing basin mixer
Ref. 26216EP
| Connector | M1/2" |
|---|---|
| Technology | SECURITHERM EP BIOSAFE |
| Height | 180mm |
| Length | 220mm |
| Drop height | 95mm |
| Spout length | 110mm |
| Flow rate | 4 lpm |
| Temperature limiter | 41°C |
| Finish | Chrome-plated brass |
Nagi oksaga Mediclinics AI0010CS R/V teras harjatud
Nagi oksaga.
harjatud
AISI 304
9,00 €
Käetugi 738 mm ülestõstetav valge Mediclinics BG2800
Käetugi 738 mm ülestõstetav valge BG2800
Käetugi 738mm ületõstetav
teras valge epoksükate
d 32mm
toru paksus 1,5mm
Pelavajutav äärikukate d 85mm
138,00 €
Dušiiste , seina pealne, tugijalaga IDRAL 12007.2
Kuni 250 kg
662,00 €
Frost iste seinale kinnitatav NOVA2 , must/must N1963-B
Nova2 Care
640,33 €
Mediclinics käetugi seinale kinnitatav kolme punktiga , R/V teras AISI304 poleeritud
BFI600C
General description
-
Wall to wall grab bar with three support points, made of diameter 32 mm AISI 304 stainless steel tube, to be installed in the washbasins and toilets.
-
With snap flange covers to conceal the screws, helping to achieve a beautiful and sleek look and protecting the flange surfaces from damage, dust, moisture and foreign particles.
-
Ideal to design barrier-free accessibility, both domestic and commercial places, these grab bars help make the lives easier for the handicapped and elderly people.
-
Highest durability and rusting resistance.
-
Optionally, these bars can be electrically isolated by installing the electrical isolation Kit code KA0020.
-
These grab bars are supplied with a kit to fix the bar to a brick wall.
Components and materials
-
BFD600C: grab bar right hand, made of diameter 32 mm AISI 304 stainless steel tube, bright finish.
-
BFI600C: grab bar left hand, made of diameter 32 mm AISI 304 stainless steel tube, bright finish.
-
BFD600CS: grab bar right hand, made of diameter 32 mm AISI 304 stainless steel tube, satin finish.
-
BFI600CS: grab bar left hand, made of diameter 32 mm AISI 304 stainless steel tube, satin finish.
-
TUBING: made of 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along the bends.
-
CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screws holes for wall mounting.
-
SNAP FLANGE COVER: three units made of stainless steel AISI 304, 0.8 mm thick and Ø 82 mm. Each cover snaps over mounting flange to conceal mounting screws.
182,00 €
