Touch-free ELEGANCE dispenser for disinfectant with a robust, shockproof plastic cover.
The design is simple, elegant and cleaning-friendly.
‼️ Kasuta promokoodi SUVI2026 ostukorvis ja saa soodustust – ainult täna!
✅ Populaarsed tooted Tallinna laos kohe olemas — tarneaeg 1–3 päeva või tule ise järele.
✅ Kui toode on tellimisel, uuri lähemalt — saame tihti pakkuda oodatust kiiremat tarnet: info@pegu.ee
✅ Kõikidele toodetele garantii 2 aastat ja 14‑päevane tagastusõigus.
✅ Automaatne arve e‑postile. E‑arve soovijatel palume lisada märge kommentaaridesse.
ℹ️ Hind sisaldab käibemaksu.
SECURITHERM EP BIOSAFE pressure-balancing basin mixer
Ref. 26216EP
SECURITHERM basin mixer H. 95mm L. 110mm with pressure balancing.
No spout: BIOSAFE hygienic outlet integrated into the body.
Anti-scalding safety: HW flow rate is reduced if CW supply fails.
Securitouch thermal insulation prevents burns.
Ø 35mm ceramic cartridge with pressure balancing.
Pre-set maximum temperature limiter.
Thermal shocks are possible without removing the control lever or shutting off the cold water supply.
Body with smooth interior and very low water volume (reduces bacterial development).
Flow rate limited to 4 lpm at 3 bar.
Solid control lever.
Mixer without pop-up waste.
Reinforced fixing via two stainless steel rods.
Supplied with copper tails and Ø 15mm stopcocks.
SECURITHERM EP BIOSAFE pressure-balancing basin mixer
Ref. 26216EP
| Connector | M1/2" |
|---|---|
| Technology | SECURITHERM EP BIOSAFE |
| Height | 180mm |
| Length | 220mm |
| Drop height | 95mm |
| Spout length | 110mm |
| Flow rate | 4 lpm |
| Temperature limiter | 41°C |
| Finish | Chrome-plated brass |
Adjustable mirror with handle
Ref. 510202N
Tilting glass mirror with handle for easy adjustment those in a seated position or in a wheelchair.
For combined installation: can be used from sitting or standing position.
Quick and easy to install: simply clip into place.
Anti-theft lock.
Metallised anthracite tab handle.
Mirror made from 6mm Securit safety glass.
Mirror dimensions: 500 x 600mm.
Can be tilted up to 20°.
Tilting mirror with tab handle
Ref. 510202N
| Height | 500mm |
|---|---|
| Depth | 84mm |
| Width | 600mm |
| Width to the wall | 70mm |
| Thickness | 6mm |
| Finish | Bright white HR Nylon |
Adjustable mirror with handle
Ref. 510202C
Tilting glass mirror with handle for easy adjustment those in a seated position or in a wheelchair.
For combined installation: can be used from sitting or standing position.
Quick and easy to install: simply clip into place.
Anti-theft lock.
Metallised anthracite tab handle.
Mirror made from 6mm Securit safety glass.
Mirror dimensions: 500 x 600mm.
Can be tilted up to 20°.
Adjustable mirror with handle
Ref. 510202C
| Height | 500mm |
|---|---|
| Depth | 84mm |
| Width | 630mm |
| Width to the wall | 70mm |
| Thickness | 6mm |
| Finish | Metallised anthracite |
Tilting mirror with long ergonomic lever
Ref. 510201N
Tilting mirror with long ergonomic lever which facilitates adjustment of mirror angle from a sitting position or by wheelchair users.
For combined installation: can be used from sitting or standing position.
Quick and easy to install: just clip into place.
Anti-theft lock.
Bright white HR Nylon lever
6mm thick Securit safety glass mirror.
Mirror dimensions: 500 x 600mm.
Can be tilted up to 20°.
Tilting mirror with long ergonomic lever
Ref. 510201N
| Height | 500mm |
|---|---|
| Depth | 230mm |
| Width | 630mm |
| Width to the wall | 70mm |
| Thickness | 6mm |
| Finish | Bright white HR Nylon |
Wall mounted MINERALCAST PMR washbasin
Ref. 132306
Wall-mounted washbasin, 785 x 545 x 150mm.
With integral side grips, can be used to support user or as a towel rail.
Sleek and fluid lines.
MINERALCAST: a composite material consisting of natural minerals and polyester resin.
Suitable for use in public and commercial places and the healthcare sector.
Shallow washbasin ideal for people with reduced mobility.
Uniform, non-porous surface is easy to clean.
One-piece pressed washbasin, seam-free, for easy maintenance and better hygiene.
Warm to the touch.
With Ø 35mm central tap hole.
Without overflow.
Supplied with fixing elements.
White, RAL 9016.
Weight: 21.5 kg.
Seebidosaator
harjatud
R/V teras AISI 304
1,5L
Vandaalikindel lukuga korpus
Isesulgev NEO valamusegisti 15 sek PRESTO
68400
Töötsükkel 15 sek
Desinfektandi sensoriga kontaktivaba dosaator Elegance 1.1L (pattarei), valge plastik
DAN DRYER 718
Desinfektandi sensoriga kontaktivaba dosaator Elegance 1.1L (pattarei), valge plastik
Kontaktivaba desoaine dosaator mahuga 1,1 liitrit (900 - 1100 doosi). Seinapealne paigaldus. Töötab 4 x 1,5 V pattareiga. Toimib desinfitseerivat lahust pihustades
718-TOUCH-FREE ELEGANCE F/DISINFECTANT
Touch-free ELEGANCE dispenser for disinfectant with a robust, shockproof plastic cover.
The design is simple, elegant and cleaning-friendly.
• Touch-free dispenser for disinfectant.
• Holds approx. 1.1 l disinfectant (= 900-1100 doses).
• For wall mounting.
• Battery-operated, runs on 4 x 1.5 V batteries.
• The front features a disinfectant-level indicator window.
• Also available for liquid soap.
• 2-year warranty.
BSI020CS
General description
Wall-floor grab bar, with three support points, made of a diameter of 32 mm AISI 304 stainless steel tube, bent in an "L" shape at 90o and with a 32mm diameter lateral arm, welded on the lower part of the grab bar and also bent at 90°.
With snap flange covers that conceal the installation screws, improving the aesthetics of the bars once installed on the wall.
These grab bars offer a great safety and comfort to the user, helping to make the bathroom much safer for the elderly or those with reduced
mobility. Models suitable for public use.
Well suited for keeping bathrooms and public enclosures barrier-free.
Highest durability and great resistance to rusting.
Optionally, these grab bars can be electrically isolated, installing the electrical isolation kit code KA0020.
Supplied with plugs and screws to fix the bar to a brick wall.
Components and materials
BSD020C: right hand grab bar made of AISI 304 stainless steel tube, bright finish.
BSI020C: left hand grab bar made of AISI 304 stainless steel tube, bright finish.
BSD020CS: right hand grab bar made of AISI 304 stainless steel tube, satin finish.
BSI020CS: left hand grab bar made of AISI 304 stainless steel tube, satin finish.
TUBING: made of a 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along the bends.
CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screw holes for wall mounting.
SNAP FLANGE COVER: three units made of AISI 304 stainless steel, 0.8 mm thick and Ø 82 mm. Each cover snaps over mounting flange to conceal mounting screws.
BFD600CS
General description
Wall to wall grab bar with three support points, made of diameter 32 mm AISI 304 stainless steel tube, to be installed in the washbasins and toilets.
With snap flange covers to conceal the screws, helping to achieve a beautiful and sleek look and protecting the flange surfaces from damage, dust, moisture and foreign particles.
Ideal to design barrier-free accessibility, both domestic and commercial places, these grab bars help make the lives easier for the handicapped and elderly people.
Highest durability and rusting resistance.
Optionally, these bars can be electrically isolated by installing the electrical isolation Kit code KA0020.
These grab bars are supplied with a kit to fix the bar to a brick wall.
Components and materials
BFD600C: grab bar right hand, made of diameter 32 mm AISI 304 stainless steel tube, bright finish.
BFI600C: grab bar left hand, made of diameter 32 mm AISI 304 stainless steel tube, bright finish.
BFD600CS: grab bar right hand, made of diameter 32 mm AISI 304 stainless steel tube, satin finish.
BFI600CS: grab bar left hand, made of diameter 32 mm AISI 304 stainless steel tube, satin finish.
TUBING: made of 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along the bends.
CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screws holes for wall mounting.
SNAP FLANGE COVER: three units made of stainless steel AISI 304, 0.8 mm thick and Ø 82 mm. Each cover snaps over mounting flange to conceal mounting screws.
PEGU.ee – ekspertide loodud sanitaartehnika ja vannitoa sisustuslahenduste platvorm. Iga segisti ja vannitoa aksessuaar on valitud isikliku kogemuse ja professionaalse teadmise põhjal. Teid nõustab sanitaartehnika peaspetsialist rohkem kui 25-aastase kogemusega. Kontakt: info@pegu.ee · +372 515 0681