Delabie L460mm valamu, ämberresti ja pritsmisplekiga R/V teras AISI304
Kaubamärk:

Ühik: tk
Tarneaeg: 14-21 päeva
Müüja: PEGU OÜ
✅ Juunikuu eripakkumine
Kasuta ostukorvis koodi PEGU-JUUNI2025 ja saa soodustust toodetele, mis ei kuulu teistesse kampaaniatesse.
✅ Pakkumine kehtib kuni 30. juunini.
PEGU.ee – tark valik kvaliteeti hindavale ostjale.
Wall-mounted cleaners' sink
Ref. 182400
Wall-mounted cleaners' sink with splashback.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 0.9mm.
Seam-free, pressed bowl.
Deep sink.
Smooth surface.
Rounded edges prevent injury.
Supplied with 1½" waste .
Without overflow.
Supplied with fixing elements and splashback.
Weight: 4.6kg.
TECHNICAL FEATURES
Wall-mounted cleaners' sink
Ref. 182400
Height | 404mm |
---|---|
Length | 370mm |
Width | 460mm |
Thickness | 0.9mm |
Finish | Polished satin 304 stainless steel |
Failid
Pesurenn roostevabast terasest Intra PV120 1200mm, konsoolidega
Pesurenn konsoolidega 1200mm
Antivandaalne WC pott INVA R/V taras
AUZ 08 INV is a stainless-steel WC in matt design for the disabled. It is a stainless-steel toilet to stand on the floor at the wall. The drain is directed backwards (the bottom drain version AUZ 02 INV). The closet is based on the standard AUZ 08, which is heightened and lengthened to fulfil the directive regarding products for disabled persons. To increase the user comfort, the seating part is provided with a seat from hardened plastic. The closet includes a removable backrest recommended by the League for the rights of the wheelchair bound.
The standing WC is suitable for places where the common closet cannot be attached to the side wall, because of a thin bearing particle, for example.
It is suitable to supplement the closet with an automatic pressure-water flushing device with delayed flushing AUZ 3 INV (suitable for the disabled) or any flushing device with a cistern.
|
Complete delivery | |
|
RMO 02
automatic washing system for wellingtons
RMO 02 is a stainless steel sensor-controlled washing system with rotary brushes for wellingtons. A built-in photocell sensor reacts to the user holding the handrail. The electromagnetic valve switches on, opens the water inlet, the brushes start to rotate and the circular jet injection of the disinfecting lotion is carried out. After placing the foot with the wellington on the grid in between the rotary brushes, the sole is cleaned by means of the horizontal brush and the leg portion is cleaned by means of two vertical brushes. The system is automatically switched off when the user releases the handrail. There is a CENTRAL/STOP button on the handrail for emergency switch-off.
The washing system is intended for free standing installation on the floor. Imperfections of the floor are balanced out by four adjustable hobs. The construction of the system allows the outlet to be placed above the floor level.
The RMO 02 washing system, with its easy maintenance, is mainly intended for operations where quick removal of mechanical dirt from wellingtons is required.
The canister with disinfecting solution is not part of the delivery.
Package contents
- body of the washing machine
- removable grid
- electronics with photocell
- three rotary brushes
- jerican holder
- priming hose
- adjustable supporting legs
- central stop button
Radius of sensor | 0,7 m |
Water inlet | G 1/2“ |
Water pressure | 0,1 – 1,0 MPa |
Outlet | G 6/4” |
Electricity protection | IP 55 |
Power supply | 230 V, 50 Hz |
Power requirement | 370 W |
Water temperature | max. 42°C |
Weight | 95 kg |
- Set up water inlet as per picture
- Set up outlet G 6/4” via effluvial cover
- Set up cable for power supply – 230 V, 50 Hz
Tööriista hoidik seinale 4ne, Mop and Broom Holder R/V teras AISI304
DESCRIPTION
293,00 €