Delabie pissuaar L 600mm antivandaalne R/V teras AISI304
Kaubamärk:
Ühik: tk
Tarneaeg: 4-6 nädalad
Proovi kupongikoodi PEGU-KEVAD ! Vali toode täishinnaga, lisa see ostukorvi ja sisesta kupongikood ostu sooritamisel! Kupongikoodi kasutamise aeg on piiratud!
Lugupeetud PEGU.EE veebipoes külastajad!
Tere tulemast meie internetipoes! Me ei ole lihtsalt iseteeninduse kassa. Kui teil on vaja nõu või abi toote valimisel, võtke meiega julgesti ühendust kas e-mailiga või messendzeriga, telefoni teel. Oleme alati valmis pakkuma teile personaalset teenindust! Täname külastuse eest!
PEGU.EE meeskond
Single L stall urinal
Ref. 130200
Trough urinal for recessing in the floor.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rear water inlet. Central drainage.
Supplied with 1 stainless steel rinser and 1 flexible hose.
Water saving: optimal rinsing with 0.1 L/sec. per service i.e. 0.3L per use.
Waste outlet 11/2". Supplied with waste and integrated trap (ref. 785000).
Weight: 16.8kg.
TECHNICAL FEATURES
Single L stall urinal
Ref. 130200
Height | 1020mm |
---|---|
Length | 300mm |
Width | 600mm |
Thickness | 1.2mm |
Finish | 304 polished satin stainless steel |
Failid
Keraamiline HOME pissuaar kaanega Alessi LAUFEN radariga Sanela, integreeritud adapter 230V/AC
SLP 24RZ
Urinal Alessi with cover with a radar flushing unit and integrated power supply, 230 V AC
Characteristics
- easy installation
- whole flushing unit is placed behind the urinal
- system reacts only on the direct use of the urinal (it analyses changes, which are proceeded inside of the urinal, when a liquid is flowing through)
- adjustable flushing time 0,5 - 15,5 s
- parameters adjustment by remote control SLD 04 without the necessity to dismantle the urinal from the wall (acoustic setting indication)
- automatic flushing after each 6 hours non-use
- possibility to regulate a water flow by the angle valve
- radar flushing unit recharges a water to the siphon after each flushing
Order number | 01245 |
Code | SLP 24RZ |
Supply specification
Technical information
Operating voltage: 230 V AC/50 Hz
Recommended flow pressure: 0,1 - 0,6 MPa
Rate of flow: 18 l/min (inf. data)
Water inlet: male thread G 3/4“
Water outlet: inlet fitting with a rubber sealing
> Working pressure : 1 to 5 bar
> Flow : 6 l/min at 3 bar - 4-position flow adjustment device Anti-water-hammering design
> Flow time : 15 seconds (± 5 sec.)
> Hydraulic supply : In-line water inlet M G 1/2" Inlet and outlet Cold water
> Thermal resistance : Resistant to a temperature of 75°C for 30 minute thermal shock
> Security : Patented anti-blocking "S" system to avoid the water to flow continuously
> Delivered with : 1 Cross-partition control (1 to 200 mm thick) 1 Short wall spout (Non-rotating fixing) 87 mm 1 Closing tap with S anti-blocking system 1 stop valve M 1/2" (15x21) / M 1/2" (15x21) with quick couplings (12x14 mm) Instruction manual
> Standards & approvals : Brass body in accordance with EN 1982, EN 12164, EN 12156 Molded chrome-plated body in accordance with EN 12540 200-hour neutral salt spray resistant (NSS) in accordance with ISO 922
General description
Fixed mirrors with a frame manufactured of stainless steel AISI 304, 1,0 mm thick.
Mirror manufactured using a first quality glass 5 mm thick and it is backed with a medium density fiber shockabsorbing and waterproof board that reinforces the glass, making it stronger. Model suitable for public use.
Maximum durability and rusting resistance. Components & materials
EP0350CS: 700 x 500 mm fixed mirror, with frame made of stainless steel AISI 304, 1,0 thick and satin finish.
EP0450CS: 800 x 600 mm fixed mirror, with frame made of stainless steel AISI 304, 1,0 thick and satin finish.
FRAME: made of stainless steel AISI 304, 1,0 thick. Unitized all welded construction. Edges and corners are burr free. BACK PART: medium density fiber shock-absorbing and waterproof board, 10 mm thick that reinforces the glass, making it stronger.
GLASS: standard glazing is No 1 quality, 5mm thick. Stainless steel screws for brick walls are included with the mirrors.
244,00 €
DESCRIPTION
BOB TC washbasin
Ref. 160130
Wall-mounted washbasin with through-the-wallinstallation for service ducts.
Basin internal diameter: 310mm.
Clean and simple design.
Bacteriostatic 304 stainless steel.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
Vandal-resistant: shrouded basin.
200mm threaded rod can be cut to size (other lengths are available on request).
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standardEN 14688.
Weight: 5.5kg.
Delabie KOMPACT TC WC+valamu vasakul põranda antivandaalne R/V teras AISI304
KOMPACT TC washbasin and floor-standing WC combination
Ref. 166600
Combination unit: washbasin and floor-standing WC pan on right sidewith recessed toilet roll holder.
Service duct installation (through-the-wall).
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel unit thickness: 2mm.
Rounded corners and edges for improved safety.
Smooth surface for easy cleaning.
Suitable for prisons, police stations, etc.
WC pan is completely welded to washbasin, no screws:
makes cleaning easier and prevents concealment of objects.
Washbasin equipped with time flow tap: stainless steel tamperproofpush-button and anti-blocking system, 7 second time flow, M1/2".
WC equipped with time flow flush valve, 7 second time flow, M3/4".
Water inlet: washbasin M1/2", WC M3/4".
Recessed horizontal water outlet: Ø 100mm
200mm threaded rod can be cut to size (other lengths available on demand).
Weight: 30kg.
[Formerly ref: 0616130006]
Technical features
KOMPACT TC washbasin and floor-standing WC combination
Ref. 166600
Height | 1000mm |
---|---|
Length | 615mm |
Width | 725mm |
Thickness | 2mm |
Finish | 304 polished satin stainless steel |