Tootegrupid
jpg_113620_1.jpg Zoom

Delabie põranda sisene WC sifooniga SHA 700 squart antivandaalne R/V teras AISI304

Tootekood: DE-113620
Kaubamärk:
Ühik: tk
Tarneaeg: 4-6 nädalad
Hind:
922,00 €
Kuumakse alates: 78,37 €
Kogus: - +
   - või -   

SHA 700 squat WC pan 
Ref. 113620

Floor-recessed squat WC pan, 700 x 345 x 700mm. 
Bacteriostatic 304 stainless steel. 
Polished satin finish.
Stainless steel thickness 1.2mm. 
One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene. 
Bowl shape suitable for male and female use. 
Non-slip foot area. 
Vertical waste outlet: Ø 100mm. 
Flushing system with one 304 stainless steel spreader. 
Supplied with stainless steel trap welded to squat WC pan.
Weight: 8kg. 
10-year warranty.

[Formerly ref: 0113630020]

TECHNICAL FEATURES 

SHA 700 squat WC pan 
Ref. 113620

Height 30mm
Depth 345mm
Length 700mm
Width 700mm
Thickness 1.2mm
Finish Polished satin 304 stainless steel

Failid

Sarnased tooted
Antivandaalne R/V teras piezo dušisi nupp, eelsegatud veele,  ilma el.adaptorita
 
 

AUS 11

Pressure button-controlled shower for heat regulated water

 

 

   
 
 
 

AUS 11 is a new type of shower fitting for single shower control. The fitting is designated for premixed water – with one water inlet and shower outlet elbow. Water is released and closed by an anti-vandal pressure button connected to electronics and an electromagnetic valve. The fitting is covered by a rust-free anti-vandal cover to prevent damage. 

The mounting system has been designed so as to make removing the cover without using tools impossible with no bolt or screw being visible. The cover can be "pushed into" the wall level even if the mount box has been walled to an incorrect depth. 

AUS 11 is identical to AUS 1P with a different design and very resistant cover sheet. 

Electronics can work in two modes: 

1) The button works on the START/STOP basis – water release/closing. If the water is not turned off upon the time adjusted by the user or manager (e.g. 20 seconds), the electronic system itself instructs water stopping. The user must press again to start water running. This significantly saves water as the user reduces the showering time. 

2) The button works on the START/STOP basis. After the time adjusted by the manager (e.g. 3 minutes) expires there is a forced break when water cannot be released. During this time, the user is forced to leave the shower or wait. This prevents needless showering – water wasting. 

 

 
Basic technical information
Water input: G 1/2“
Water pressure: 1 - 10 Bar (0,1 – 1,0 MPa)
Time of water flow: 10 s – 42,5 min in mode 1
  0 s - 42,5 min in mode 2
Power supply: 12 V, 50 Hz
Power requirement: 6 VA
Source of power supplz: ZAC 1/20 (max. 3× AUS 11)
  ZAC 1/50 (max. 8× AUS 11)
Weight: 2,0 kg
 
 
Requirements for setting up the construction
  1. Water installation set up as per picture
  2. Set-up alcove 150 x 75 mm for installation casket
  3. Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
 
 
Complete delivery
  • installation casket
  • input and output bolting
  • electromagnetic valve
  • spherical valve
  • covering metal plate with piezo button
  • electronics
 
 
Made to order
  • SP 1 – shower arm with water flow of 9 l/min
  • SP 2 – shower arm with water flow of 7 l/min
  • SP 3 – shower arm with water flow of 7 l/min
  • ZAC - source of power supply 12V, 50Hz
 
 
Figure
 
 
A - water inlet G 1/2"
C - electricity supply cable 12 V, 50 Hz 
G - water outlet into shower armG 1/2"
 
 
 
 
Download information about the product
AUS 11 data for projectants - ( 84 kB )
 
Tootekood: AZP-AUS 11 ,   Tarneaeg: 3-4 nädalad
375,00 €

BOB HD washbasin 
Ref. 164130

Wall-mounted hand washbasin. 
Basin internal diameter: 310mm. 
Clean and simple design. 
Bacteriostatic 304 stainless steel. 
Stainless steel thickness: 1.2mm. 
Rounded edges prevent injury. 
Vandal-resistant: shrouded basin, concealed trap, reinforced mounting frame. 
Quick and easy to install from the front thanks to a stainless steel mounting frame. 
Supplied with 11/2" waste and trap. 
Without overflow. 
Supplied with fixing elements. 
CE marked. Complies with European standard EN 14688. 

 

TECHNICAL FEATURES 

BOB HD washbasin 
Ref. 164130

Height 285mm
Length 400mm
Width 360mm
Thickness 1.2mm
Finish Polished satin 304 stainless steel
Tootekood: DE-164130 ,   Tarneaeg: 14-21 päeva
799,00 €

KOMPACT TC washbasin and floor-standing WC combination 
Ref. 166700

Combination unit: washbasin and floor-standing WC pan on left sidewith recessed toilet roll holder. 
Service duct installation (through-the-wall). 
Bacteriostatic 304 stainless steel. 
Polished satin finish. 
Stainless steel unit thickness: 2mm. 
Rounded corners and edges for improved safety. 
Smooth surface for easy cleaning. 
Suitable for prisons, police stations, etc. 
WC pan is completely welded to washbasin, no screws: 
makes cleaning easier and prevents concealment of objects. 
Washbasin equipped with time flow tap: stainless steel tamperproofpush-button and anti-blocking system, 7 second time flow, M1/2".
WC equipped with time flow flush valve, 7 second time flow, M3/4".
Water inlet: washbasin M1/2", WC M3/4".
Recessed horizontal water outlet: Ø 100mm. 
200mm threaded rod can be cut to size (other lengths available on demand). 
Weight: 30kg. 
[Formerly ref: 0616130007]

 

TECHNICAL FEATURES 

KOMPACT TC washbasin and floor-standing WC combination 
Ref. 166700

Height 1000mm
Length 615mm
Width 725mm
Thickness 2mm
Finish 304 polished satin stainless steel
Tootekood: DE-166700 ,   Tarneaeg: 4-6 nädalad
4172,00 €

SHA XS squat WC pan 
Ref. 113720

Floor-recessed squat WC pan, 500 x 325 x 600mm. 
Bacteriostatic 304 stainless steel. 
Polished satin finish.
Stainless steel thickness 1.2mm. 
One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene. 
Bowl shape suitable for male and female use. 
Non-slip foot area. 
Vertical waste outlet: Ø 100mm. 
Flushing system with one 304 stainless steel spreader.
Supplied with stainless steel trap welded to squat WC pan.
Weight: 7kg. 

TECHNICAL FEATURES 

SHA XS squat WC pan 
Ref. 113720

Height 30mm
Depth 325mm
Length 600mm
Width 500mm
Thickness 1.2mm
Finish 304 polished satin stainless steel
Tootekood: DE-113720 ,   Tarneaeg: 4-6 nädalad
793,00 €

Tila seinast, 87 mm, seina paksus 0-20cm

 

> Working pressure :

1 to 5 bar

> Flow :

Full flow straightener
Water flow depending on the chosen tapware

> Functionality :

Wall-mounted chrome-plated brass spout without water retention

> Hydraulic supply :

M G 1/2" (15x21) with threaded spigot for cross-partition installation from 1 to 200mm

> Thermal resistance :

Resistant to a temperature of 75°C for 30-minute-thermal-shocks

> Delivered with :

1 suitable gasket 1 rose
1 flow straightener 1 nut

> Standards & approvals :

Brass body and component in accordance with EN 1982/CC754S, NF EN 12164/CW614N, NF EN 12165/CW617N Molded chrome-plated body in accordance with EN 12540
200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227

Tootekood: P30901 ,   Tarneaeg: 14-21 päeva
94,05 € (5%)
99,00 €
Projektide hinnapäringud ja tooteinfo kättesaadavusega seotud küsimused palume saata e-mailile info@pegu.ee