| Water inlet | G 1/2" |
| Water pressure | 2 – 6 Bar, recommended 3 Bar |
| Outlet | d = 40 mm |
| Inner dimensions of sink | d = 290 mm |
| Weight | 20 kg |
Delabie Kirurgiline valamu madala pritsmekaitsega "Hygiene+" 3 töökohta 2100mm RST AISI304 187020
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
‼️ Kasuta promokoodi TALV2026 ostukorvis ja saa soodustust – ainult täna!
✅ Populaarsed tooted Tallinna laos kohe olemas — tarneaeg 1–3 päeva või tule ise järele.
✅ Kui toode on tellimisel, uuri lähemalt — saame tihti pakkuda oodatust kiiremat tarnet: info@pegu.ee
✅ Kõikidele toodetele garantii 2 aastat ja 14‑päevane tagastusõigus.
✅ Automaatne arve e‑postile. E‑arve soovijatel palume lisada märge kommentaaridesse.
ℹ️ Hind sisaldab käibemaksu.
Hind:
![]()
Kuumakse alates: 370,43 €
4358,00 €
Kirurgiline valamu madala pritsmekaitsega "Hygiene+" 3 töökohta 2100mm RST AISI304
Kirjeldus:
Kirurgiline valamu Ref. 187020 on loodud spetsiaalselt haiglate ja hooldusasutuste vajaduste jaoks. Selle madal pritsmekaitse (75 mm) ja "Hygiene+" disain tagavad suurepärase hügieeni ja lihtsa puhastamise, vähendades bakterite arenguks sobivaid alasid. Valamu on valmistatud bacteriostatic 304 roostevabast terasest, sileda pinnaga ja ümarate servadega, et puhastamine oleks kiire ja tõhus.
Peamised omadused:
- Seinakinnitusega disain
- Madal pritsmekaitse: 75 mm
- "Hygiene+": varjatud äravool, bakterite arengualade vähendamine
- Sile pind ja ümarad servad lihtsaks puhastamiseks
- Valmistatud bacteriostatic 304 roostevabast terasest
- Paksus: 1,2 mm
- Kaks töökohta, ilma segistiaukudeta
- Drenaaž paremal, ilma ülevooluta
- Mõõdud: kõrgus 645 mm, laius 400 mm, pikkus 2,100 mm
- Kaal: 37,6 kg
- CE-sertifikaat, vastab EN 14296 standardile ja HTM64 juhistele
Surgical scrub-up trough with low upstand
Ref. 187020
Wall-mounted surgical scrub-up trough with 75mm upstand.
Suitable for hospitals and healthcare facilities.
Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.2mm.
Length 2,100mm, 3 services. Without tap hole.
Smooth surface and rounded inside edges for easy cleaning.
"Hygiene+": reduces niches where bacteria can develop, concealed trap, easy to clean.
Drainage on the right. Without overflow. Supplied with fixing elements.
Weight: 37.6kg.
Failid
Sarnased tooted
Delabie Valamu HEMI d310mm AISI304 harjatud roostevaba teras 120470
HEMI inset round washbasin Ø 310mm - Ref. 120470
Round basin for recessed installation from above or below.
Basin internal diameter: 310mm.
Cut-out diameter: 330mm for installation from above, 310mm for installation from below.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1mm. One-piece, seam-free pressed bowl.
Rounded edges prevent injury. Supplied with 1¼" waste. Without overflow.
CE marked.
Complies with European standard EN 14688. Weight: 1.5kg.
[Formerly ref: 0213470201]
Tootekood: DE-120470
, Tarneaeg: 14-21 päeva
, Viimistlus:
179,00 €
Pissuaari mehhanism infra-red paigalduse karbiga, adaptoriga 230V/AC Sanela SLP02NZ
SLP 02NZ
Urinal infra-red flushing unit with a mounting box and integrated power supply, 230 V AC
Characteristics
- system reacts to the user attendance in front of the urinal at a maximum distance of 0,7 m, minimum stay time in active range is 7,5 s
- water flows after the user leaves active range
- adjustable flushing time 0,5 - 15,5 s
- parameters adjustment by remote control SLD 03
- automatic hygiene flushing after 24 hours non-use
- possibility to regulate a water flow by the ball valve
| Order number | 42023 |
| Code | SLP 02NZ |
Supply specification
SLP 02NZ - Supply No. 42023 - stainless steel cover with electronics, plastic mounting box with brass screw coupling, electromagnetic valve and ball valve, power supply
Technical information
Stainless steel cover dimension: 170 x 170 x 10 mm
Mounting box dimension: 140 x 140 x 75 mm
Operating voltage: 230 V AC/50 Hz
Active range: 0,6 - 0,75 m
Recommended flow pressure: 0,1 - 0,6 MPa
Rate of flow: 18 l/min (inf. data)
Water inlet: male thread G 3/4“
Water outlet: male thread G 3/4“
Mounting box dimension: 140 x 140 x 75 mm
Operating voltage: 230 V AC/50 Hz
Active range: 0,6 - 0,75 m
Recommended flow pressure: 0,1 - 0,6 MPa
Rate of flow: 18 l/min (inf. data)
Water inlet: male thread G 3/4“
Water outlet: male thread G 3/4“
Tootekood: SA-SLP02NZ
, Tarneaeg: 14-21 päeva
, Viimistlus:
421,80 €
Joogifontään free-standing mehaaniline R/V teras AISI304 AZP Brno AFO02
AFO 02 - IIstainless steel free-standing drinking fountain (indoor/outdoor)
AFO 02-II is a stainless steel drinking fountain of modern design with a manual press valve that allows its easy use. The water flows only when the valve is pressed and then there is a certain adjusted time to rinse out the nozzle.
The drinking fountain is to be placed in an open space. It is made up of an anchoring part intended for embedding in concrete and the column itself with a press valve and nozzle. These parts are connected by means of 3 screws and the upper part can be, therefore, easily dismounted in case of necessity (e.g. during winter).
The water inlet is fitted with a flexible hose, the siphon is made from a stretchy, flexible connector. The flexible finish of the water inlet and outlet allows the variable and problem-free connection of the fountain.
AFO 02-II stainless steel fountain is suitable mainly for schools, medical facilities and spa resorts, and is utilizable outdoors.
Drinking fountain AFO 02-II is manufactured from the stainless steel AISI 304. AFO 02.CL-II is made of the stainless steel AISI 316 and is suitable for places with higher concentration of chlorine.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).Detail of the bowl
Package contents
- stainless steel column and cone with nozzle
- press valve
- anchoring construction
- flexible hose siphon
- connecting hoses
- anchoring material
- Set-up water inlet - pipe G 1/2“
- Set-up drainage d = 40 mm
- Prepared alcove for embedding (concreting) in the base construction
Tootekood: AZP-AFO02
, Tarneaeg: 3-4 nädalad
, Viimistlus:
1556,10 €
Joogifontään veejahutussüsteemiga põranda/sein piezo nupp, R/V teras AISI304 230V/50Hz
AZP Brno AFO01.SC
AFO 01.SC
drinking fountain with cooling designed to stand and to be attached to wall
AFO 01.SC is a drinking fountain with cooling designed to stand and to be attached to wall. User can select between uncooled water and water running through a flow cooler. The fountain is operated by means of two piezo-buttons – resistant solution. Facility keeper can set a time period after which the water flow automatically stops.
The product contains a flow cooler. It is not a design with cooled tank only where – after the pre-cooled amount of water is pumped out – the user has to wait for the next charge to be cooled.
Flexible design of water supply and outflow allows variable and easy connection of the drinking fountain as well as its dismounting.
ttles
Automatic drinking fountain (with a sensor) can be supplied per order.
AFO 01.S is manufactured from the stainless steel AISI 304.
Other materials (e.g. AISI 316) possible on order. For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).
Package contents
- Stainless housing with cone
- Electronics and control piezo-buttons
- Water supply and electromagnetic valves
- Flow cooler
- Flexible hose outflow
- Fixing and connecting material
| dimensions | 330 x 900 x 365 mm |
| water outlet | d = 40 mm |
| water inlet | G 1/2" |
| water pressure | 0,2 – 0,6 MPa, recommended 0,3 MPa |
| power supply | 230 V, 50 Hz |
| power input | 820 W |
| weight | 24 kg |
- Set up water outlet d = 40 mm
- Set up water inlet G 1/2"
- Electric socket 230 V, or electric cable CYKY 3C x 1,5
Tootekood: AZP-AFO01.SC
, Tarneaeg: 3-4 nädala
, Viimistlus:
5245,61 €
Joogifontään AFO04 seinale mehaaniline R/V teras AISI316(basseinile)
AZP Brno AFO04.CL
AFO 04
suspension drinking fountain
AFO 04 is a stainless-steel drinking fountain of a modern design. It is manufactured with a double surface finish: matt bowl (blasted with ballotini) and brushed casing. Thanks to its interesting appearance, it particularly suits public spaces, such as sports facilities, parks, squares, business centres, fitness and wellness centres, but also schools and kindergartens.
Similarly to AFO 01, the drinking fountain is operated with a push valve. Water is flowing while the valve is pushed and for a preset time after its release, in which way the nozzle is rinsed.
The water inlet is through a flexible hose; siphon trap is made of a flexible coupling. The flexible design of the water inlet and outlet enables variable and trouble-free connection of the fountain as well as its simple dismounting.
The AFO 04 drinking fountain is made from stainless steel of the AISI 304 class; the AFO 04.CL drinking fountain is made from steel of the AISI 316 class.
Package contents
- stainless steel casing
- press valve
- corner valve with filter
- fixing bar
- siphon
- connecting hose
- anchoring material
| Water inlet | G 1/2" |
| Water pressure | 2 - 6 Bar (recommended 3 Bar) |
| Outlet | d = 40 mm |
| Inner dimension of the fountain | d = 245 mm |
| Weight | 4 kg |
- Set-up water inlet - pipe G1/2“.
- Set-up drainage d = 40 mm.
Tootekood: AZP-AFO04.CL
, Tarneaeg: 3-4 nädalad
, Viimistlus:
1246,10 €
