Delabie valamu REDO 121710, R/V teras AISI304
Kaubamärk:

Ühik: tk
Tarneaeg: 14 päeva
✅ PEGU.ee-s valime ainult seda, mida on meeldiv omada kodus.
Nutikad lahendused, kaunis disain ja tõestatud kvaliteet.
Kui valid meie juurest, valid kindlustunde.
Suurepärane valik!
Lisa toode ostukorvi ja vormista tellimus!
REDO wall-mounted washbasin
Ref. 121710
Wall-mounted washbasin.
Basin internal diameter: 320mm.
Clean and simple design.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
With central tap hole Ø 35mm.
Supplied with 1 ¼" waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 3kg.
TECHNICAL FEATURES
REDO wall-mounted washbasin
Ref. 121710
Height | 150mm |
---|---|
Length | 375mm |
Width | 430mm |
Thickness | 1.2mm |
Finish | 304 polished satin stainless steel |
Failid
Kroom FMM-nr:1641-0000
- Temperatuuriseade nupuga, akutoitel (aku kaasas)
- Vandalismikindel, kest üleni metallist
- ECO funktsioon (vett ja energiat säästev õhusti 5 l/min)
- Aegreleega loputuse lõpetus üleujutamise vältimiseks
- 30-sekundiline loputusaeg (anduriga)
- Võimalik välja lülitada 60 sekundiks (näiteks puhastamiseks)
- Madal voolutarve, pikk eluiga
- Võimalik kuuma veega läbi loputada, et desinfitseerida legionella vastu
- IP-klassi andur, IP67
- Keskkonnasõbralik materjal, pliivaba, niklivaba
Paigaldamine: - Anduri automaatne kalibreering
- Pärast seadistamist sobivale temperatuurile, on võimalik nupp asendada ehiskaanega
- Kõiki mudeleid on võimalik kasutada nii 6V aku toitel või 12V vooluadapteriga
- Võrguvoolu kasutamiseks on tarvis paigaldada vooluadapter 1623-0000 ja toide FMM 1619-4000 või teise võimalusena trafo FMM 1619-3000
- Pehmed PEX® voolikud koos integreeritud tagasilöögiklappide ja filtritega (roostevabast terasest)
- Ava läbimõõt Ø 33,5–37 mm
Seaded: - Reguleeritav maksimaalne temperatuur
- Programmeeritav hügieeniloputuse funktsioon
- Seadistatav loputusaeg
Keskselt juhitav mudel: - Komplektis kaabel, millega on võimalik juhtida hügieeniloputust
- Loputus toimub, kui sissevool on suletud
Elektroisolatsioon klass 1
Kaal 3,8 kg
Voolutarve 1,3-4,8 A
Koguvõimsus 1010W-1150W
Kaitseklass IP23
Müratase 58-68dB(2m kaugusel)
Kuivatusaeg 10-15 sek.
523,44 €
SENSOR - LIQUID SOAP DISPENSER 950ML BOTTLE WP 102E
86 x 298 x 121 mm
Choose product variant
- Sensor liquid soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - With EWAR® eModule touch-free operated and non-drip soap pump.
- Designed for standard 950 ml disposable bottles of liquid soap or hand lotion.
- Inspection slot to indicate fill level.
- Accessible for refilling through lockable, hinged housing.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- eModule battery-powered with two 1.5 V Baby/LR14 batteries.
Power supply available as an option. - Wear parts can be replaced as modules.
- Mounting: With three screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material, batteries and first fill with soap.
- Weight (in kg): 2,8
Vedelseebidosaator kontaktivaba
Dimensions - 265 x 118 x 110 mm
Capacity - 0,8 L
Quantity dispensed per pulsation - 1 ml
Weight (empty dispenser) - 0,750 Kg
151,44 €
Automatne kummikute pesur düüsiga, 12V, 50Hz
automatic washing system for wellingtons with jets - 12V, 50Hz
AMO 01 is a stainless steel automatic washing system for wellingtons with sensor-controlled water nozzles. When stepping into the washing chamber of the system (scanning zone) water starts to flow from the nozzles automatically and wellingtons are cleaned of dirt. Water stops flowing with a certain time delay after the foot has been removed from the scanning zone.
AMO 01 is designed for a single pipe inlet of pre-mixed water from the circulation or water pre-mixed by means of a thermostatic valve.
The AMO 01 automatic washing system is intended mainly for operations with slight shoe contamination where quick washing at maximum water savings is guaranteed.
Package contents
- body of the washing machine
- photocell head
- nozzles – 8 pcs
- electromagnetic valves 2 pcs
- corner valves with filter
- connecting hoses
Radius of sensor | 0 – 0,4 m |
Water inlet | G 1/2“ |
Water pressure | 0,3 – 1,0 MPa |
Outlet | d = 32 mm |
Inner dimensions of the trough | 250 x 400 x 280 mm |
Electricity protection | IP 55 |
Power supply | 12 V, 50 Hz |
Power requirement | 10 VA |
Source of power supply | ZAC 1/20 (max. 2 x AMO 01) |
ZAC 1/50 (max. 5 x AMO 01) | |
Weight | 18 kg |
- Set up water inlet as per picture
- Set up outlet d = 32 mm
- Set up cable for power supply – 12 V, 50 Hz from source of power supply ZAC