| Water inlet | G 1/2" |
| Water pressure | 2 – 6 Bar, recommended 3 Bar |
| Outlet | d = 40 mm |
| Inner dimensions of sink | d = 290 mm |
| Weight | 20 kg |
Delabie valamu TRAPEZ 600x505 segisti avaga 35mm roostevaba teras satiin 121270
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
‼️ Kasuta promokoodi KEVAD2026 ostukorvis ja saa soodustust – ainult täna!
▼ Loe edasi: ...
✅ Populaarsed tooted Tallinna laos kohe olemas — tarneaeg 1–3 päeva või tule ise järele.
✅ Kui toode on tellimisel, uuri lähemalt — saame tihti pakkuda oodatust kiiremat tarnet: info@pegu.ee
✅ Kõikidele toodetele garantii 2 aastat ja 14‑päevane tagastusõigus.
✅ Automaatne arve e‑postile. E‑arve soovijatel palume lisada märge kommentaaridesse.
ℹ️ Hind sisaldab käibemaksu.
Hind:
665,00 €
![]()
Kuumakse alates: 50,89 €
598,50 €
Delabie valamu TRAPEZ 600x505 segisti avaga 35mm roostevaba teras satiin 121270
Wall-mounted TRAPEZ washbasin
Ref. 121270
Wall-mounted washbasin, 600x505mm.
Shallow washbasin suitable for people with reduced mobility.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
Supplied with 1 ¼" waste.
Without overflow.
With central tap hole Ø 35mm.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 5.5kg.
Failid
Sarnased tooted
Intra GUB2 R/V teras koristaja valamu, ämberresti ja pritsmisplekiga
Valamu R/V terasest
Garaazi/koristusruumi jaoks
Tootekood: I-GUB2
, Tarneaeg: 7-14 päeva
, Viimistlus:
324,00 € (10%)
360,00 €
360,00 €
Koristaja valamu Intra U2 490x390x260 INTRA
Bucket sink in stainless steel for wall mounting. Supplied with stainless steel wall panel, supporting bracket and 3 1/2" x 2" grated waste, and reducer from 2" - 1 1/2".
Tootekood: I-U2EXP
, Tarneaeg: 7-14 päeva
, Viimistlus:
396,00 € (10%)
440,00 €
440,00 €
Delabie valamu CANAL 2400mm, R/V teras (4 kohta) 120300
CANAL wall-mounted wash trough
Ref. 120300
Wall-mounted wash trough for 4 posts - 2,400mm
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1mm for the bowl, 1.5mm for surroundand fixing brackets.
Easy to install: no joint concealers to install, light wash trough.
Drainage on the right.
With no tap hole.
Supplied with 1 ½" waste.
Without overflow.
Supplied with brackets and fixing elements.
CE marked. Complies with European standard EN 14296.
Weight: 20kg.
Possible to add a bacteriostatic 304 stainless steel splashback (ref. 0011800007).
| Height | 250mm |
|---|---|
| Length | 2400mm |
| Width | 400mm |
| Thickness | 1mm (basin) et 1.5mm (edge and fixing brackets) |
| Finish | 304 polished satin stainless steel |
Tootekood: DE-120300
, Tarneaeg: 14-21 päeva
, Viimistlus:
1168,20 € (10%)
1298,00 €
1298,00 €
Bobrick Tööriista hoidik seinale 4ne, Mop and Broom Holder R/V teras AISI304 B-223x36
DESCRIPTION
36" (915mm) long. Type 304 stainless steel, satin finish. Anti-slip mop holders have spring-loaded rubber cam that grips handles 7⁄8" to 1 1⁄4" (20–30mm) diameter. Holds 4 mops 3 1⁄4" (85mm) from wall. Height 5" (125mm).
Tootekood: B-223x36
, Tarneaeg: 4-8 nädala
, Viimistlus:
347,00 €
Joogifontään free-standing mehaaniline R/V teras AISI304 AZP Brno AFO02
AFO 02 - IIstainless steel free-standing drinking fountain (indoor/outdoor)
AFO 02-II is a stainless steel drinking fountain of modern design with a manual press valve that allows its easy use. The water flows only when the valve is pressed and then there is a certain adjusted time to rinse out the nozzle.
The drinking fountain is to be placed in an open space. It is made up of an anchoring part intended for embedding in concrete and the column itself with a press valve and nozzle. These parts are connected by means of 3 screws and the upper part can be, therefore, easily dismounted in case of necessity (e.g. during winter).
The water inlet is fitted with a flexible hose, the siphon is made from a stretchy, flexible connector. The flexible finish of the water inlet and outlet allows the variable and problem-free connection of the fountain.
AFO 02-II stainless steel fountain is suitable mainly for schools, medical facilities and spa resorts, and is utilizable outdoors.
Drinking fountain AFO 02-II is manufactured from the stainless steel AISI 304. AFO 02.CL-II is made of the stainless steel AISI 316 and is suitable for places with higher concentration of chlorine.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).Detail of the bowl
Package contents
- stainless steel column and cone with nozzle
- press valve
- anchoring construction
- flexible hose siphon
- connecting hoses
- anchoring material
- Set-up water inlet - pipe G 1/2“
- Set-up drainage d = 40 mm
- Prepared alcove for embedding (concreting) in the base construction
Tootekood: AZP-AFO02
, Tarneaeg: 3-4 nädalad
, Viimistlus:
1556,10 €
