Dušiiste põrandale CARE Normbau Ascento 548x437x623 mm, tumehall 8750030.018
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
‼️ Kasuta promokoodi SUVI2026 ostukorvis ja saa soodustust – ainult täna!
▼ Loe edasi: ...
✅ Populaarsed tooted Tallinna laos kohe olemas — tarneaeg 1–3 päeva või tule ise järele.
✅ Kui toode on tellimisel, uuri lähemalt — saame tihti pakkuda oodatust kiiremat tarnet: info@pegu.ee
✅ Kõikidele toodetele garantii 2 aastat ja 14‑päevane tagastusõigus.
✅ Automaatne arve e‑postile. E‑arve soovijatel palume lisada märge kommentaaridesse.
ℹ️ Hind sisaldab käibemaksu.
Dušiiste põrandale CARE Normbau Ascento 548x437x623 mm, tumehall 8750030.018
Care Stool, 548 x 437 x 623 mm, Dark grey
- Ascento as Modular Seating Solution, expandible and combinable
- ergonomic formed seat with rounded outer edges upper extended bow arms that serve as as grab rails with non-slip rubber buffers in colour black
- Product : Hocker
- Product group : 8700
- Length : 548 mm
- Width : 437 mm
- Height : 623 mm
- Wide seat surface : 412 mm
- Depth of the seat surface : 419 mm
- Material : Polypropylen, Gestell aus Edelstahl, Werkstoff Nr. 1.4301 (A2, AISI 304)
- Surface : matt
- Colour : lieferbar in Dunkelgrau (018) und Weiß (019)
- Loading : max. 150 kg
Haceka Kosmos kroom vannikäepide seinale 30CM 1208589
30x7,6x5,3 cm
Haceka Kosmos: Modernne Disain ja Hollandi Kvaliteet
Haceka Kosmos on üks populaarsemaid sarju PEGU.ee laias vannitoa ja WC aksessuaaride valikus. See ühendab endas minimalistliku disaini, funktsionaalsuse ja 1924. aastast pärineva Hollandi kvaliteedi. Kosmos-sarja iseloomustavad puhtad jooned ja ümarad vormid, mis sobivad ideaalselt nii modernsesse kodusesse vannituppa, hotellitubadesse kui ka suurtesse avalikesse projektlahendustesse.
Kvaliteetne ZAMAK-materjal ja Kroomviimistlus
Erinevalt odavatest plastikust alternatiividest on Haceka Kosmos tarvikud valmistatud ZAMAK-materjalist (tugev tsingisulam), mis annab toodetele meeldiva raskuse ja stabiilsuse. Kvaliteetne kroomviimistlus tagab kõrge korrosioonikindluse niisketes ruumides ja annab aksessuaaridele luksusliku läike, mida on lihtne hooldada ja puhastada.
Nutikas Paigaldus: Kruvidega või Ilma Puurimiseta
Haceka on loonud lahenduse, mis säästab teie aega ja seinapindu. PEGU.ee eksperdid kinnitavad, et kõik Kosmos sarja tooted on paigaldatavad kahel viisil:
- Traditsiooniline paigaldus: Komplektis on kaasas vajalikud kinnitid (kruvid ja düüblid) seinale kinnitamiseks.
- Puurimisvaba paigaldus: Tooteid saab paigaldada seinale kasutades spetsiaalset Haceka HangOn liimi (ei ole komplektis). See on ideaalne lahendus, kui te ei soovi kahjustada uusi keraamilisi plaate või üüripinna seinu.
Valige Haceka Kosmos tarvikud PEGU.ee e-poest, kui otsite vannituppa ajatut stiili ja töökindlust, mis kestab aastaid.
33,00 €
Dušiiste , seina pealne, tugijalaga IDRAL 12007.2
Kuni 250 kg
662,00 €
Mediclinics käetugi parem sinale/põrandale, roostevaba teras AISI304 poleeritud
BSD020C
General description
-
Wall-floor grab bar, with three support points, made of a diameter of 32 mm AISI 304 stainless steel tube, bent in an "L" shape at 90o and with a 32mm diameter lateral arm, welded on the lower part of the grab bar and also bent at 90°.
-
With snap flange covers that conceal the installation screws, improving the aesthetics of the bars once installed on the wall.
-
These grab bars offer a great safety and comfort to the user, helping to make the bathroom much safer for the elderly or those with reduced
mobility. Models suitable for public use.
-
Well suited for keeping bathrooms and public enclosures barrier-free.
-
Highest durability and great resistance to rusting.
-
Optionally, these grab bars can be electrically isolated, installing the electrical isolation kit code KA0020.
-
Supplied with plugs and screws to fix the bar to a brick wall.
Components and materials
-
BSD020C: right hand grab bar made of AISI 304 stainless steel tube, bright finish.
-
BSI020C: left hand grab bar made of AISI 304 stainless steel tube, bright finish.
-
BSD020CS: right hand grab bar made of AISI 304 stainless steel tube, satin finish.
-
BSI020CS: left hand grab bar made of AISI 304 stainless steel tube, satin finish.
-
TUBING: made of a 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along the bends.
-
CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screw holes for wall mounting.
-
SNAP FLANGE COVER: three units made of AISI 304 stainless steel, 0.8 mm thick and Ø 82 mm. Each cover snaps over mounting flange to conceal mounting screws.
-
206,00 €
Mediclinics käetugi seinale kinnitatav kolme punktiga , R/V teras AISI304 harjatud
BFI600CS
General description
-
Wall to wall grab bar with three support points, made of diameter 32 mm AISI 304 stainless steel tube, to be installed in the washbasins and toilets.
-
With snap flange covers to conceal the screws, helping to achieve a beautiful and sleek look and protecting the flange surfaces from damage, dust, moisture and foreign particles.
-
Ideal to design barrier-free accessibility, both domestic and commercial places, these grab bars help make the lives easier for the handicapped and elderly people.
-
Highest durability and rusting resistance.
-
Optionally, these bars can be electrically isolated by installing the electrical isolation Kit code KA0020.
-
These grab bars are supplied with a kit to fix the bar to a brick wall.
Components and materials
-
BFD600C: grab bar right hand, made of diameter 32 mm AISI 304 stainless steel tube, bright finish.
-
BFI600C: grab bar left hand, made of diameter 32 mm AISI 304 stainless steel tube, bright finish.
-
BFD600CS: grab bar right hand, made of diameter 32 mm AISI 304 stainless steel tube, satin finish.
-
BFI600CS: grab bar left hand, made of diameter 32 mm AISI 304 stainless steel tube, satin finish.
-
TUBING: made of 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along the bends.
-
CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screws holes for wall mounting.
-
SNAP FLANGE COVER: three units made of stainless steel AISI 304, 0.8 mm thick and Ø 82 mm. Each cover snaps over mounting flange to conceal mounting screws.
182,00 €
Delabie Be-line invatugi 135° 220 x 220mm Antracite aluminim 511983C
Be-Line drop-down support rail, L. 650mm, anthracite
Ref. 511960C
Be-Line drop-down support rail for people with reduced mobility.
In the lowered position use as a grab bar, as a support for standingand for assisting movement, for WCS or showers.
Allows side access in the raised position.
Removable: easy to remove with anti-theft locking system. Reduces the number of barsin a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility.
Slowed down descent. Retained in upright position.
Aluminium tube.
Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip.
Metallised anthracite powder-coated aluminium finish provides a good visual contrast with the wall.
Uniform surface for easy maintenance and hygiene.
Concealed fixings secured to wall by a 304 stainless steel plate, 5mm thick.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Dimensions: 650 x 210 x 120mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
TECHNICAL FEATURES
Be-Line drop-down support rail, L. 650mm, anthracite
Ref. 511960C
| Height | 210mm |
|---|---|
| Length | 650mm |
| Width | 120mm |
| Finish | Powder-coated metallised anthracite aluminium |
