Inva käetugi FROST, 780mm, harjatud N1961

Inva käetugi FROST, 780mm, harjatud N1961

Tootekood: FRON1961
Kaubamärk:

Ühik: tk
Tarneaeg: 14-21 päeva

‼️ Kasuta promokoodi KEVAD2026 ostukorvis ja saa soodustust – ainult täna!

▼ Loe edasi: ...

✅ Populaarsed tooted Tallinna laos kohe olemas — tarneaeg 1–3 päeva või tule ise järele.

✅ Kui toode on tellimisel, uuri lähemalt — saame tihti pakkuda oodatust kiiremat tarnet: info@pegu.ee

✅ Kõikidele toodetele garantii 2 aastat ja 14‑päevane tagastusõigus.

✅ Automaatne arve e‑postile. E‑arve soovijatel palume lisada märge kommentaaridesse.

ℹ️ Hind sisaldab käibemaksu.

PEGU OÜ — Usaldusväärne ettevõte 2024

kuumaks al. 50,97 €

Hind:

599,67 €

Kuumakse alates: 50,97 €

Inva käetugi FROST, 780mm, harjatud N1961

The supporting armrest provides assistance to those with limited strength and mobility.

It increases the safety in all areas of the bathroom - such as by the wash basin, the toilet or in the shower. Nova2 Care

Height: 190mm

Width: 145mm

Depth: 780mm

Diameter: Ø32mm

Weight: 6,6 kg.

Designer: Bønnelycke mdd

Material: Stainless steel

Kokku sobivad tooted

WC paberi hoidja FROST invatoele 1961, harjatud N1962

For mounting on armrest 1961. Nova2 Care

Height: 128mm

Depth: 163mm

Weight: 0,4 kg.

Design: Bønnelycke mdd

Material: Stainless steel

Tootekood: FRON1962 , Tarneaeg: 14-21 päeva , Viimistlus:

82,33 €

Kate Invatoele FROST 2 tk/set R/V teras harjatud N1961-1

If the armrest is removed, the cover buttons are used to hide the brackets for the armrest.

The back plate is purchased together with the armrest.

Diameter: 42mm

CC: Ø42mm

Weight: 0,15 kg.

Design: Bønnelycke mdd

Material: Stainless steel

Kui käetugi eemaldatakse, kasutatakse käetoe sulgude peitmiseks kattenuppe.

Tagumine plaat ostetakse koos käetoega.

Läbimõõt: 42mm

CC: Ø42mm

Kaal: 0,15 kg.

Kujundus: Bønnelycke mdd

Materjal: roostevaba teras

Tootekood: FRON1961-1 , Tarneaeg: 14-21 päeva , Viimistlus:

50,82 €

Sarnased tooted

Soodus

Käetugi 710 mm, jalaga ületõstetav R/V teras harjatud Mediclinics BGC710CS

Kinnitus põrandale

R/V teras AISI304 harjatud

d 32mm

toru paksus 1,5mm

Pelavajutav äärikukate d 85mm

Tootekood: MBGC710CS , Tarneaeg: 7 päeva , Viimistlus:

396,90 € (10%)
441,00 €

WC paberi hoidel (BF670 käepide jaoks) Wagner Ewar BA010

Toilet roll holder BA010

140 x 60 mm permanently welded

Toilet roll holder in 12 mm thick solid rod in stainless steel (AISI 304), satin finished.
Permanently welded to (hinged-), (wall-to-floor-) support rail.
Designed for one standard toilet roll with dimensions:
Outer diameter max. 125 mm
Width max. 100 mm
Core diameter min. 38 mm
Internal unrolling control mechanism in black TPE.
Mounting: Fully assembled.

Weight (in kg): 0.2

Available surfaces

Order numbers

satin finished (standard)

600010

Tootekood: WAG-BA010 , Tarneaeg: 14 päeva , Viimistlus:

110,00 €

Soodus

Mediclinics Invakäetugi 90" R/V teras AISI304 parem, harjatud BAD090CS

Mediclinics Invakäetugi 90" R/V teras AISI304 parem, harjatud

BAD090CS

material:AISI 304 stainless steel | finish:Satin

90º angled grab bar

Mediclinics offers these products for the purpose of improving the quality of life of people with reduced mobility.

Solutions with several ergonomics and functionalities and with the possibility of having different materials and finishes. Mediclinics offers professionals a wide range of grab bars for toilets to help persons with reduced mobility use the facilities. Within this range, two product lines are available:

Medinox Series

State of the art design, high durability and easy to maintain. The process used for bending the grab bars guarantees uniformity in the diameter of its curves. Built using AISI 304 stainless steel with a bright and satin finish.

Mediepoxy Series

Solutions manufactured with a corrosion resistant treatment, ideal for very harsh environments, with a low need for maintenance and long durability. The grab bars for toilets are made of steel with an epoxy finish.

Mediclinics grab bars for toilets include a snap flange cover for installation out of sight, offering a perfect visual finish and allowing to be easily blended in with the decoration of the room.

Apart from the grab bars for toilet, Mediclinics provides shower seats made of AISI 304 stainless steel, which are robust, safe and suitable for installation in harsh environments.

Tootekood: MBAD090CS , Tarneaeg: 7-21 päeva , Viimistlus:

128,70 € (10%)
143,00 €

Soodus

Mediclinics käetugi parem sinale/põrandale, roostevaba teras AISI304 poleeritud BSD020C

Mediclinics käetugi parem sinale/põrandale, roostevaba teras AISI304 poleeritud

BSD020C

General description

 Wall-floor grab bar, with three support points, made of a diameter of 32 mm AISI 304 stainless steel tube, bent in an "L" shape at 90o and with a 32mm diameter lateral arm, welded on the lower part of the grab bar and also bent at 90°.
 With snap flange covers that conceal the installation screws, improving the aesthetics of the bars once installed on the wall.
 These grab bars offer a great safety and comfort to the user, helping to make the bathroom much safer for the elderly or those with reduced

mobility. Models suitable for public use.
 Well suited for keeping bathrooms and public enclosures barrier-free.
 Highest durability and great resistance to rusting.
 Optionally, these grab bars can be electrically isolated, installing the electrical isolation kit code KA0020.
 Supplied with plugs and screws to fix the bar to a brick wall.

Components and materials
-  BSD020C: right hand grab bar made of AISI 304 stainless steel tube, bright finish.
-  BSI020C: left hand grab bar made of AISI 304 stainless steel tube, bright finish.
-  BSD020CS: right hand grab bar made of AISI 304 stainless steel tube, satin finish.
-  BSI020CS: left hand grab bar made of AISI 304 stainless steel tube, satin finish.
-  TUBING: made of a 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along the bends.
-  CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screw holes for wall mounting.
-  SNAP FLANGE COVER: three units made of AISI 304 stainless steel, 0.8 mm thick and Ø 82 mm. Each cover snaps over mounting flange to conceal mounting screws.