Kätekuivati Sanela JET kontaktivaba hall ABS
Tootekoodid ja tehniline info on kättesaadavad projekti või spetsiaalse päringu korral.
Ekspert aitab valida sobivaima lahenduse nii koju kui objekti jaoks.
Soovitame jagada tootelehte, mitte ainult koodi – see välistab segaduse.
Küsi julgelt: info@pegu.ee
Ühik: tk
Tarneaeg: 14-21 päeva
Müüja: PEGU OÜ
Kätekuivati Sanela JET kontaktivaba hall ABS
SLO 01S
Automatic wall mounted hand dryer, grey cover
Characteristics
- jet automatic hand dryers
- air is flowing as long as hands are in the active range
- adjustable drying time 3 - 33 s, standard 20 s
- water drains to the tank placed in the bottom part of the dryer, no floor pollution by water under the dryer
| Order number | 79012 |
| Code | SLO 01S |
Supply specification
Technical information
Operating voltage: 230 V/50 Hz
Air flow: 300 km/h
Protection: class II, IP 31
Weight: 9,5 kg
Noise level: < 90 dB
Failid
Moeks disain,keskmise hinnaklass,suurepärane tasakaal ja valikus.
-Optimaalne jõudluse ja energiakulu suhe
-Sensoriga toimiv
-Hooldusvaba
-Ülikaine (ainult 57dB) ja ergonoomiline
-Reguleeritav tuvastuskaugus (5-25cm)
-Ideaalne tulemuse ja hinna tasakaal
Kuivatuseaeg on 30-40 sek
Keevisõmbluseta korpus on aluste kinnitatud kahe vandaalikindla poldiga ja lukustatud spetsiaalse Saniflow võtmega
3mm paksune alumiinium alus
Tulekindlast plastist ventilaatorikamber
Termostaatlülitiga F-klassi universaalne harjadega mootor
Alumiiniumist tsentrifugaalne topeltsümmetriline õhuvõtuventilaatori tiivik
Elemendi on termokaitselüliti
Elektroisolatsioon klass 1
Kaitseklass IP23
DESCRIPTION
Hand dryer automatically activated by optical cell, with 360° nozzle
Ref. 6613D
Automatic hand dryer.
Vandal-resistant model.
Automatically activated via optical cell.
360° rotating nozzle.
Metal thickness: 1.2mm.
Cover 304 stainless steel, bright polished finish.
Dimensions: 210 x 280 x 220mm.
Weight: 3.5kg.
Power: 2,000W. 50-60Hz.
Airflow: 95 l/second.
Low noise level: 68 dBA.
Maximum safety, Class II insulation(double electrical insulation), IP23.
CE marked, TÜV GS.
TECHNICAL FEATURES
Hand dryer automatically activated by optical cell, with 360° nozzle
Ref. 6613D
| Height | 220mm |
|---|---|
| Depth | 210mm |
| Width | 280mm |
| Thickness | 1.2mm |
| Finish | 304 stainless steel, bright polished cover |
• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.
• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.
• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.
• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.
• Adjustable power motor to regulate power consumption between 180 and 850 W.
• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).
• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.
• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.
• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.
