| Water inlet | G 1/2" |
| Water pressure | 0,2 – 0,6 MPa (recommended 0,3 MPa) |
| Outlet | d = 40 mm |
| Inner dimension of the fountain | d = 245 mm |
| Weight | 4 kg |
Pesurenn AZP Brno ilma segistiavadeta. L=1900mm roostevaba teras AUL06.2
Kaubamärk:
Ühik: tk
Tarneaeg: 4-6 nädala
‼️ Kasuta promokoodi TALV2026 ostukorvis ja saa soodustust – ainult täna!
✅ Enamik populaarseid tooteid on Tallinna laos kohe olemas — tarneaeg 1–3 päeva või ise järeletulemine.
✅ Kui toode on tellimisel, kontrolli tarneaega või küsi täpsust e-postil: info@pegu.ee
✅ Kõikidele toodetele kehtib garantii 2 aastat. Tavakaupadele (ilma eritellimuseta) tagastusõigus 14 päeva.
✅ Automaatne arve saatmine e-postile nii era- kui äriklientidele. E-arve soovijatel palume lisada märge kommentaaridesse.
Hind:
![]()
Kuumakse alates: 116,54 €
1371,11 €
Pesurenn AZP Brno ilma segistiavadeta. L=1900mm roostevaba teras AUL06.2
AUL 06st. steel wall mounted wash trough
| general dimensions | L x 430 x 190 mm |
| outlet | opening for 6/4" standrd washbasin siphon |
| material | st. steel AISI 304, thickness 1,5 mm (AUL 06.1 a AUL 06.2 - 1,2 mm) |
AUL 06
st. terasest seinakinnitusega pesurenn
AUL 06 on roostevabast terasest seinakinnitusega ümbris. Selle konstruktsioon võimaldab väljavooluharude või anduriga juhitavate kraanide paigaldamist. Künni standardversioon on ilma kraanide avadeta. Ava saab teha soovi korral.
AUL 06 is a stainless steel wall mounted trough with casing. Its construction enables installation of outflow arms, or sensor-controlled taps. The standard version of the trough is without openings for the taps. Openings can be made on a request.
We offer also washbasins AUM 030 and AUM 029 in similar design. Thus long troughs and smaller washbasins can be combined in one space with no need for design change.
Outlet of trough is standardly on the right side (in frontal view). Left sided outlet can be made on order (must be noted) AUL 06 wash trough is intended, thanks to its design, for washrooms and changing rooms in food production industry.
Lenght of the troughs can be adapted according to project’s data sheet. Data sheet acceptance is must.
Package contents
- st. steel wash trough
- cantilever
- mounting material
left sided outlet
openings 33 mm for faucets
other lengths
other dimensions
Sarnased tooted
Antivandaalne WC pott INVA R/V taras AZP Brno AUZ 08 INV
Antivandaalne WC pott INVA R/V taras
AUZ 08 INV is a stainless-steel WC in matt design for the disabled. It is a stainless-steel toilet to stand on the floor at the wall. The drain is directed backwards (the bottom drain version AUZ 02 INV). The closet is based on the standard AUZ 08, which is heightened and lengthened to fulfil the directive regarding products for disabled persons. To increase the user comfort, the seating part is provided with a seat from hardened plastic. The closet includes a removable backrest recommended by the League for the rights of the wheelchair bound.
The standing WC is suitable for places where the common closet cannot be attached to the side wall, because of a thin bearing particle, for example.
It is suitable to supplement the closet with an automatic pressure-water flushing device with delayed flushing AUZ 3 INV (suitable for the disabled) or any flushing device with a cistern.
|
||||||||||||
| Complete delivery | |
|
|
Tootekood: AZP-AUZ-08-INV
, Tarneaeg: 3-4 nädalad
, Viimistlus:
2672,10 €
Joogifontään seinale mehaaniline R/V teras AISI304 AZP Brno AFO01
AFO 01 stainless steel wall-mounted drinking fountain
AFO 01 is a stainless steel wall-mounted drinking fountain of modern design with a manual press valve that allows its easy use. The water flows only when the valve is pressed and then there is a certain adjusted time to rinse out the nozzle.
The water inlet is fitted with a flexible hose, the siphon is made from a stretchy, flexible connector. The flexible finish of the water inlet and outlet allows the variable and problem-free connection of the fountain.
AFO 01 stainless steel fountain is suitable mainly for schools, medical facilities and spa resorts, and is utilizable outdoors.
AFO 01 is made of stainless steel AISI 304.
AFO 01.CL is made of stainless steel AISI 316 and is suitable into the areas with higher concentration of chlorine (e.g. swimming pools).
Sensor-controlled fountain possible made to order.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).
Package contents
- stainless steel sink with casing
- press valve
- corner valve with filter
- flexible hose siphon
- fixing bar
- connecting hoses
- anchoring material
Tootekood: AZP-AFO01
, Tarneaeg: 3-4 nädala
, Viimistlus:
777,54 €
Joogifontään free-standing mehaaniline R/V teras AISI304 AZP Brno AFO02
AFO 02 - IIstainless steel free-standing drinking fountain (indoor/outdoor)
AFO 02-II is a stainless steel drinking fountain of modern design with a manual press valve that allows its easy use. The water flows only when the valve is pressed and then there is a certain adjusted time to rinse out the nozzle.
The drinking fountain is to be placed in an open space. It is made up of an anchoring part intended for embedding in concrete and the column itself with a press valve and nozzle. These parts are connected by means of 3 screws and the upper part can be, therefore, easily dismounted in case of necessity (e.g. during winter).
The water inlet is fitted with a flexible hose, the siphon is made from a stretchy, flexible connector. The flexible finish of the water inlet and outlet allows the variable and problem-free connection of the fountain.
AFO 02-II stainless steel fountain is suitable mainly for schools, medical facilities and spa resorts, and is utilizable outdoors.
Drinking fountain AFO 02-II is manufactured from the stainless steel AISI 304. AFO 02.CL-II is made of the stainless steel AISI 316 and is suitable for places with higher concentration of chlorine.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).Detail of the bowl
Package contents
- stainless steel column and cone with nozzle
- press valve
- anchoring construction
- flexible hose siphon
- connecting hoses
- anchoring material
- Set-up water inlet - pipe G 1/2“
- Set-up drainage d = 40 mm
- Prepared alcove for embedding (concreting) in the base construction
| Water inlet | G 1/2" |
| Water pressure | 2 – 6 Bar, recommended 3 Bar |
| Outlet | d = 40 mm |
| Inner dimensions of sink | d = 290 mm |
| Weight | 20 kg |
Tootekood: AZP-AFO02
, Tarneaeg: 3-4 nädalad
, Viimistlus:
1556,10 €
Joogifontään free-standing mehaaniline R/V teras AISI316
AZP Brno AFO02.CL
AFO 02 - IIstainless steel free-standing drinking fountain (indoor/outdoor)
AFO 02-II is a stainless steel drinking fountain of modern design with a manual press valve that allows its easy use. The water flows only when the valve is pressed and then there is a certain adjusted time to rinse out the nozzle.
The drinking fountain is to be placed in an open space. It is made up of an anchoring part intended for embedding in concrete and the column itself with a press valve and nozzle. These parts are connected by means of 3 screws and the upper part can be, therefore, easily dismounted in case of necessity (e.g. during winter).
The water inlet is fitted with a flexible hose, the siphon is made from a stretchy, flexible connector. The flexible finish of the water inlet and outlet allows the variable and problem-free connection of the fountain.
AFO 02-II stainless steel fountain is suitable mainly for schools, medical facilities and spa resorts, and is utilizable outdoors.
Drinking fountain AFO 02-II is manufactured from the stainless steel AISI 304. AFO 02.CL-II is made of the stainless steel AISI 316 and is suitable for places with higher concentration of chlorine.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).Detail of the bowl
Package contents
- stainless steel column and cone with nozzle
- press valve
- anchoring construction
- flexible hose siphon
- connecting hoses
- anchoring material
- Set-up water inlet - pipe G 1/2“
- Set-up drainage d = 40 mm
- Prepared alcove for embedding (concreting) in the base construction
| Water inlet | G 1/2" |
| Water pressure | 2 – 6 Bar, recommended 3 Bar |
| Outlet | d = 40 mm |
| Inner dimensions of sink | d = 290 mm |
| Weight | 20 kg |
Tootekood: AZP-AFO02.CL
, Tarneaeg: 3-4 nädalad
, Viimistlus:
1934,20 €
Kranikaussi komplekt TEMPOSTOP 1-200mm
Delabie 741943
TECHNICAL FEATURES
TEMPOSTOP time flow tap
Ref. 741943
| Connector | M1/2" |
|---|---|
| Technology | Time flow |
| Length | 200mm |
| Spout length | 75mm |
| Flow rate | 3 lpm |
TEMPOSTOP time flow tap
Ref. 741943
Cross wall time flow tap with swivel spout :
Time flow ~7 sec.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
Tamperproof scale-resistant flow straightener.
Solid chrome-plated brass body M1/2".
Control ≤ 200mm and spout ≤ 230mm cut-size.
Anti-rotating pin and back-nut. AB anti-blocking system.
AB anti-blocking system: water will flow only when the push-button is
Tootekood: DE-741943
, Tarneaeg: 7-21 päeva
, Viimistlus:
363,00 €
