Tootegrupid
slzn82.jpg Zoom

Roostevaba teras peegel KEG

Tootekood: SA-SLZN82
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
Hind:
797,87 €
Kuumakse alates: 67,82 €
Kogus: - +
 Roostevaba teras peegel KEG

Characteristics

  • mounting on the wall
  • dimensions 394 x 394 x 114 mm
  • mirror - high polished finish
  • frame - brushed finish
Sarnased tooted

Joogifontaan kinnitus seina FP-004, satiin

 
 
Tootekood: FP-004 ,   Tarneaeg: 7 nädalad ,   Viimistlus:
690,13 €
 
 

ZAC 1/20, ZAC 1/50, ZAC 1/36L

power supply

   
 
 
 

ZAC is a safe source of voltage supply intended to power automatic sanitary equipment made by AZP Brno, Ltd. 

The source of power supply consists of a safety transformer produced in accordance with ČSN IEC 742+A1 standards. All kinds of sensors can be connected to these sources in random combinations, as can other devices with a supply voltage of 12 V, 50 Hz (total power requirement either 20 VA, 50 VA or 36 VA). 

ZAC 1/20 and ZAC 1/50 are independent sources, 1/36L ZAC is the source for the location on the DIN-rail (4 modules).

 

 
Version types
ZAC 1/20 - source of power supply with output 20 VA
ZAC 1/50 - source of power supply with output 50 VA
ZAC 1/36L - source of power supply with output 36 VA
 
Source of power supply can be placed at a maximum distance of 30 m from the connected appliance. 
 
Basic technical information
Input voltage: 230 V, 50 Hz
Output voltage: 12 V, 50 Hz
Power requirement: 20 VA (ZAC 1/20)
  50 VA (ZAC 1/50)
  36 VA (ZAC 1/36L)
Electricity protection: IP 55 (ZAC 1/20, ZAC 1/50)
  IP 20 (ZAC 1/36L)
Weight: 0,8 kg (ZAC 1/20, ZAC 1/36L)
  1,2 kg (ZAC 1/50)
 
 
Requirements for setting up the construction
ZAC 1/20, ZAC 1/50
  1. Set-up supply of electricity 230 V,50 Hz – cable CYKY 3Cx1,5
  2. Set-up niche for flush mounting – size as per installed source
  3. Distribution to each device is carried out by cable CYKY 2Ax1,5
ZAC 1/36 L
  1. It is installed on the DIN-rail - width of 4 modules
 
 
Figure
ZAC 1/20
 
ZAC 1/50
 
 
 
 
 
Product title
ZAC 1/20 - 
power supply for up to 3 devices - 230V, 50Hz
ZAC 1/50 - 
power supply for up to 8 devices - 230V, 50Hz
ZAC 1/36L - 
power supply for up to 6 devices - 230V, 50Hz
Tootekood: AZP-ZAC 1-20 ,   Tarneaeg: 3-4 nädalad ,   Viimistlus:
106,72 €

REDO wall-mounted washbasin 
Ref. 121710

Wall-mounted washbasin. 
Basin internal diameter: 320mm. 
Clean and simple design. 
Bacteriostatic 304 stainless steel. 
Polished satin finish. 
Stainless steel thickness: 1.2mm. 
Rounded edges prevent injury. 
With central tap hole Ø 35mm. 
Supplied with 1 ¼" waste. 
Without overflow. 
Supplied with fixing elements. 
CE marked. Complies with European standard EN 14688. 
Weight: 3kg. 

 

TECHNICAL FEATURES

REDO wall-mounted washbasin 
Ref. 121710

Height 150mm
Length 375mm
Width 430mm
Thickness 1.2mm
Finish 304 polished satin stainless steel

Tootekood: DE-121710 ,   Tarneaeg: 14 päeva ,   Viimistlus:
533,61 €

CANAL wall-mounted wash trough 
Ref. 120300

Wall-mounted wash trough for 4 posts - 2,400mm 
Bacteriostatic 304 stainless steel. 
Polished satin finish. 
Stainless steel thickness: 1mm for the bowl, 1.5mm for surroundand fixing brackets. 
Easy to install: no joint concealers to install, light wash trough. 
Drainage on the right. 
With no tap hole. 
Supplied with 1 ½" waste. 
Without overflow. 
Supplied with brackets and fixing elements. 
CE marked. Complies with European standard EN 14296. 
Weight: 20kg. 
Possible to add a bacteriostatic 304 stainless steel splashback (ref. 0011800007). 

 

Height 250mm
Length 2400mm
Width 400mm
Thickness 1mm (basin) et 1.5mm (edge and fixing brackets)
Finish 304 polished satin stainless steel
Tootekood: DE-120300 ,   Tarneaeg: 14-21 päeva ,   Viimistlus:
1259,31 €

Joogifontään seinale sensoriga R/V teras AISI304 6V(4x1.5V)

AFO 01.Yst. steel sensor controlled drinking fountain

AFO 01.Y is st. stainless wall hung drinking fountain controlled by sensor. Water runs after disrupting the scanning zone.

Fountain is made by welding all components together. 

Fountain is suppplied with safety power 12 V, 50 Hz from power supply ZAC (AFO 01.Y) or with 4x AA battery (AFO 01.YB). 

Material is standardly st. steel AISI 304 or can be AISI 316 (AFO 01.Y.CL or AFO 01.YB.CL).

St. steel driking fountain AFO 01.Y is based on favourite model AFO 01 with manual control. 

The sensor, located on the right side of the fountain, is reacting on the approach of the user. Water starts to run from the nozzle, located in the middle of the fountain bowl, and runs over the time when the user´s head is in the scanning zone (max. 30 sec.) + preset time (max. 4 sec.) to clean the nozzle. 

Package contents

  • st. steel drinking fountain
  • nozzle
  • sensor and electronic
  • electromagnetic valve
  • connecting flexible hose
  • corner valve with filters
  • siphon
  • mounting material
water inlet G 1/2"
water pressure 1 - 10 Bar (AFO 01.Y; AFO 01.Y.CL)
  2 - 8 Bar (AFO 01.YB; AFO 01.YB.CL)
outlet d = 40 mm
bowl inner dimension d = 245 mm
weigth 4 kg
suppply 12 V, 50 Hz (AFO 01.Y; AFO 01.Y.CL)
  6 V - 4 x AA battery (AFO 01.YB; AFO 01.YB.CL)
power supply ZAC 1/20 (max. 3 x AFO 01.Y ; AFO 01.Y.CL)
 
Tootekood: AZP-AFO01.YB ,   Tarneaeg: 3-4 nädala ,   Viimistlus:
942,20 €

PEGU.ee – iga segisti ja vannitoa aksessuaar on valitud isikliku teadmise ja kogemusega.Teid teenindab sanitaartehnika ekspert Aleksandr Gumenjuk, 25+ aasta kogemusega. info@pegu.ee · +372 515 0681