Complete pre-rinse set with bib tap. 
Deck-mounted twin hole mixer with 150mm centres with: 
- Valve heads with reinforced mechanisms with ergonomic control levers. 
- Offset inlet connections with M1/2" tails. 
Bib tap with: 
- Swivelling, tubular spout L. 200mm. 
- 25 lpm full flow rate achieved within the first 90°. 
- Valve head with reinforced mechanism with ergonomic control lever. 
Black, scale-resistant M1/2" hand spray with adjustable jet and 9 lpm flow rate at the outlet. 
Black, reinforced, food-grade flexible hose L. 0.95m. 
3/4" brass column. 
Adjustable wall bracket. 
Stainless steel spring guide. 

TECHNICAL FEATURES 

Twin hole pre-rinse set with mixer 
Ref. 5633

Group thermostatic mixing valve for mixed water distribution from 32° to 42°C: 
Anti-scalding safety. 
Regulation of temperature variations. 
Non-return valves and filters accessible from the exterior without having to remove the mechanism. 
Thermal cartridge with no specific lever needed (push-button on the control knob). 
Interchangeable cartridge with automotive cell.
High-resistance chrome-plated brass body. 
Maximum hot water temperature: 85°C. 
Differential hot water / mixed water: 15°C mini. 
Pressure differences at the entrance: 1 bar maximum (0.5 bar recommended). 
Minimum pressure / maximum: 1 to 10 bar (1 to 5 bar recommended). 
Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring). 
Mixed water outlet at the top (purple ring). 
For bottom outlet: unscrew / place lid at the top and outlet connector at the bottom. 
Maximum temperature limiter, can be adjusted by the installer. 
Reduced risk of scalding by limiting temperature at the point-of-use. 
140 lpm - M1 ¼".