Valamu antivandaalne komplekt 1-200mm seinale 31660
Kaubamärk:
Ühik: tk
Tarneaeg: 6-7 nädalad
‼️ Kasuta promokoodi SUVI2026 ostukorvis ja saa soodustust – ainult täna!
▼ Loe edasi: ...
✅ Populaarsed tooted Tallinna laos kohe olemas — tarneaeg 1–3 päeva või tule ise järele.
✅ Kui toode on tellimisel, uuri lähemalt — saame tihti pakkuda oodatust kiiremat tarnet: info@pegu.ee
✅ Kõikidele toodetele garantii 2 aastat ja 14‑päevane tagastusõigus.
✅ Automaatne arve e‑postile. E‑arve soovijatel palume lisada märge kommentaaridesse.
ℹ️ Hind sisaldab käibemaksu.
Valamu antivandaalne komplekt 1-200mm seinale 31660
31660
> Working pressure : 1 to 5 bar
> Flow : 6 l/min at 3 bar - 4-position flow adjustment device Anti-water-hammering design
> Flow time : 15 seconds (± 5 sec.)
> Hydraulic supply : In-line water inlet M G 1/2" Inlet and outlet Cold water
> Thermal resistance : Resistant to a temperature of 75°C for 30 minute thermal shock
> Security : Patented anti-blocking "S" system to avoid the water to flow continuously
> Delivered with : 1 Cross-partition control (1 to 200 mm thick) 1 Short wall spout (Non-rotating fixing) 87 mm 1 Closing tap with S anti-blocking system 1 stop valve M 1/2" (15x21) / M 1/2" (15x21) with quick couplings (12x14 mm) Instruction manual
> Standards & approvals : Brass body in accordance with EN 1982, EN 12164, EN 12156 Molded chrome-plated body in accordance with EN 12540 200-hour neutral salt spray resistant (NSS) in accordance with ISO 922
Failid
Valamu ventiil antivandaalne Presto 500 S 15 sek 1/2" 31100
31100
Valamu ventiil antivandaalne Presto 500 S 15 sek 1/2"
Peitnupp Presto 18725 1/2" 512S TC, 0,1-20cm Külm vesi (VALAMU,DUSS)
Peitnupp Presto 18725
1/2" 512S TC, 0,1-20cm Külm vesi (VALAMU,DUSS)
Peitnupp Presto 1/2" 512S TC, 0,1-20cm Külm vesi (VALAMU,DUSS)
Kraanikaussi segisti isesulguv, 15sek 3bar PRESTO
68032
Vajutava nupuga segisti
Presto
kroom
15 sek. töötsükkel 3 bar
3-6 l/min
Pissuaari kraan seinast, ühendustoruga PRESTO 31713
31713
Pissuaarikraan 1/2-1/2" 6 sek
Isesulguva mehhanismiga, kroom
Ühendustoru on komplektis
Delabie WC pott INVA Monobloco roostavaba teras 700 110790
Delabie WC pott INVA Monobloco 700 R/V teras
DESCRIPTION
MONOBLOCO 700 PMR WC pan with cistern
Ref. 110790
Floor-standing WC pan with dual flush cistern 3L/6L, 370 x 895 x 700mm.
700mm elongated pan for better comfort for people with reduced mobility.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.5mm.
One-piece pressed WC bowl, seam-free for better hygiene.
WC bowl surface is polished with rounded edges for easy cleaning.
Concealed perimetral flushing rim. Water supply can be recessed from below or exposed from the side (right/left).
Recessed horizontal or vertical waste outlet. Supplied with PVC pipe.
Pre-drilled holes for fixing the toilet seat. Supplied with stainless steel blanking caps when installed without toilet seat lid.
Quick to install: 2 access panels with theft prevention TORX security screws.
CE marked. Complies with European standard EN 997 for 4L flush.
Weight: 22kg.
10-year warranty.
TECHNICAL FEATURES
MONOBLOCO 700 PMR WC pan with cistern
Ref. 110790
| Height | 895mm |
|---|---|
| Length | 700mm |
| Width | 370mm |
| Thickness | 1.5mm |
| Finish | Polished satin 304 stainless steel |
MORA külmumisvastane aiakraan 400mm, võtmega 461400
PROPERTIES
- Self-draining
- Key included
- With approved non-return valve
- Can be cut to suit wall thickness
- Wall bracket: H=110 mm, W=60 mm
Automatne kummikute pesur harjaga, 220V, 50Hz roostevaba teras AZP Brno RMO 02
RMO 02
automatic washing system for wellingtons
RMO 02 is a stainless steel sensor-controlled washing system with rotary brushes for wellingtons. A built-in photocell sensor reacts to the user holding the handrail. The electromagnetic valve switches on, opens the water inlet, the brushes start to rotate and the circular jet injection of the disinfecting lotion is carried out. After placing the foot with the wellington on the grid in between the rotary brushes, the sole is cleaned by means of the horizontal brush and the leg portion is cleaned by means of two vertical brushes. The system is automatically switched off when the user releases the handrail. There is a CENTRAL/STOP button on the handrail for emergency switch-off.
The washing system is intended for free standing installation on the floor. Imperfections of the floor are balanced out by four adjustable hobs. The construction of the system allows the outlet to be placed above the floor level.
The RMO 02 washing system, with its easy maintenance, is mainly intended for operations where quick removal of mechanical dirt from wellingtons is required.
The canister with disinfecting solution is not part of the delivery.
Package contents
- body of the washing machine
- removable grid
- electronics with photocell
- three rotary brushes
- jerican holder
- priming hose
- adjustable supporting legs
- central stop button
| Radius of sensor | 0,7 m |
| Water inlet | G 1/2“ |
| Water pressure | 0,1 – 1,0 MPa |
| Outlet | G 6/4” |
| Electricity protection | IP 55 |
| Power supply | 230 V, 50 Hz |
| Power requirement | 370 W |
| Water temperature | max. 42°C |
| Weight | 95 kg |
- Set up water inlet as per picture
- Set up outlet G 6/4” via effluvial cover
- Set up cable for power supply – 230 V, 50 Hz
