WC paberihoidja süvistatud 1 rull , R/V teras satiin Wagner Ewar WP157S
Kaubamärk:
Ühik: tk
Tarneaeg: 14 päeva
Lisa toode korvi ja vali tarnemeetod. Registreerumine pole kohustuslik!⚡
ℹ️ Hind sisaldab käibemaksu.
▼ Loe edasi: ...
✅ Populaarsed tooted Tallinna laos kohe olemas — tarneaeg 1–3 päeva või tule ise järele.
✅ Kui toode on tellimisel, uuri lähemalt — saame tihti pakkuda oodatust kiiremat tarnet: info@pegu.ee
✅ Kõikidele toodetele garantii 2 aastat ja 14‑päevane tagastusõigus.
✅ Automaatne arve e‑postile. E‑arve soovijatel palume lisada märge kommentaaridesse.
ℹ️ Hind sisaldab käibemaksu.
WC paberihoidja süvistatud 1 rull , R/V teras satiin Wagner Ewar WP157S
TOILET ROLL HOLDER FOR FLUSH-MOUNTING WP 157
163 x 170 x 100 mm
for 1 roll
- Toilet roll holder in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel construction, visible surfaces satin finished and brushed.
Further available surfaces: see below. - Designed for one standard toilet roll with dimensions:
Outer diameter max. 125 mm
Width max. 100 mm
Core diameter min. 38 mm - Accessible for refilling by unlocking the center axis.
- Installation dimensions: 145 x 152 x 100 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material.
- Weight (in kg): 1,1
Failid
Nagi , R/V teras harjatud PRESTO 60355
60355
Nagi, harjatud
Seinale vannituppa, köögi
R/V teras AISI 304
47,00 €
Kätekuivati Mediclinics Speedflow sensoriga, roostevaba teras AISI304 harjatud
M06ACS
Elektroisolatsioon klass 1
Kaal 3,8 kg
Voolutarve 1,3-4,8 A
Koguvõimsus 1010W-1150W
Kaitseklass IP23
Müratase 58-68dB(2m kaugusel)
Kuivatusaeg 10-15 sek.
509,00 €
Mähkimislaud, horisontaalne, R/V tears seinasisene Wagner Ewar
WP2010S
Nappy changer WP2010
- Nappy changer in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed, handle strip with glossy surface.
Further available surfaces: see below. - Easy to open and close with maintenance free lifting mechanism supported by gas struts.
- Table surface in grey polypropylene, molded, without any visible fixtures.
- Intended for use with paper overlays.
- TÜV-tested and certified according to
EN 12221-1:2013
EN 12221-2:2013
AfPS GS 2019:01 PAK - Test load 150 kg. Approved for private use:
Load capacity up to 11 kg / age up to 1 year. - Wear parts can be replaced as modules.
- Installation dimensions: 902 x 568 x 110 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material.
- Weight (in kg): 25.1
2851,00 €
WC paberi suure rulli hoidik, valge Wagner Ewar WP163V
WC paberi suure rulli hoidik
R/V teras AISI 303, satiin
Wagner Ewar
- Large roll dispenser in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; visible surfaces satin finished and brushed.
Further available surfaces: see below. - Designed for one standard large roll with dimensions:
Outer diameter max. 280 mm
Width max. 100 mm
Core diameter min. 40 mm - Spring pressure plate to prevent unintended unrolling.
- Inspection slot to indicate fill level.
- Accessible for refilling through lockable, hinged housing.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material.
- Can be converted to WP163-S at a later time: Conversion kit ID 923 290.
- Weight (in kg): 4.8
600,00 €
Ülalt avatud uksega prügikast 43L, R/V teras , satiin Wagner Ewar WP198S
WASTE BIN WP 198
298 x 450 x 510 mm
ca. 43 l
- Waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; visible surfaces satin finished and brushed.
Further available surfaces: see below. - Equipped with removable mesh basket. Capacity approx. 43 l. Accessible through lockable door. Waste disposal from above through an optional waste disposal ring or flap.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall off-floor below vanity unit, or as an option with console or base for a surcharge.
- Delivery includes fixing material.
- Weight (in kg): 8,0
619,00 €






