Tootegrupid
Intra GUB3 R/V teras koristajavalamu, ämberresti ja pritsmisplekiga, äravool 100mm Zoom

Intra GUB3 R/V teras koristajavalamu, ämberresti ja pritsmisplekiga, äravool 100mm

Tootekood: I-GUB3
Kaubamärk:
Ühik: tk
Tarneaeg: 14 -21 päeva
Hind:
360,82 €
Kuumakse alates: 30,67 €
Kogus: - +

Intra GUB3 R/V teras koristajavalamu, ämberresti ja pritsmisplekiga, äravool 100mm

Valamu R/V terasest

Garaazi/koristusruumi jaoks

Sarnased tooted

Intra GUB2 R/V teras koristaja valamu, ämberresti ja pritsmisplekiga

Valamu R/V terasest

Garaazi/koristusruumi jaoks

Tootekood: I-GUB2 ,   Tarneaeg: 7-14 päeva ,   Viimistlus:
360,82 €

Roostevaba teras WC pott Delabie Monobloco S21, R/V AISI304 matt 110390

DESCRIPTION

MONOBLOCO S21 WC pan with cistern 
Ref. 110390

Floor-standing WC pan with dual flush cistern 3L/6L, 370 x 815 x 620mm. 
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.5mm. 
One-piece pressed WC bowl, seam-free for better hygiene. 
WC bowl surface is polished with rounded edges for easy cleaning. 
Concealed perimetral flushing rim. Water supply can be recessed from below or exposed from the side (right/left). 
Recessed horizontal or vertical waste outlet. Supplied with PVC pipe. 
Pre-drilled holes for fixing the toilet seat. Supplied with stainless steel blanking caps when installed without toilet seat lid. 
Quick to install: 2 access panels with theft prevention TORX security screws. 
CE marked. Complies with European standard EN 997 for 4L flush.
Weight: 21kg.
10-year warranty.

 

TECHNICAL FEATURES 

MONOBLOCO S21 WC pan with cistern 
Ref. 110390

Height 815mm
Length 620mm
Width 370mm
Thickness 1.5mm
Finish 304 polished satin stainless steel
Tootekood: DE-110390 ,   Tarneaeg: 7 nädalad ,   Viimistlus:
2478,98 €

AZP Brno adapter 1-3 punkte ZAC 1-20

 
 

ZAC 1/20, ZAC 1/50, ZAC 1/36L

power supply

   
 
 
 

ZAC is a safe source of voltage supply intended to power automatic sanitary equipment made by AZP Brno, Ltd. 

The source of power supply consists of a safety transformer produced in accordance with ČSN IEC 742+A1 standards. All kinds of sensors can be connected to these sources in random combinations, as can other devices with a supply voltage of 12 V, 50 Hz (total power requirement either 20 VA, 50 VA or 36 VA). 

ZAC 1/20 and ZAC 1/50 are independent sources, 1/36L ZAC is the source for the location on the DIN-rail (4 modules).

 

 
Version types
ZAC 1/20 - source of power supply with output 20 VA
ZAC 1/50 - source of power supply with output 50 VA
ZAC 1/36L - source of power supply with output 36 VA
 
Source of power supply can be placed at a maximum distance of 30 m from the connected appliance. 
 
Basic technical information
Input voltage: 230 V, 50 Hz
Output voltage: 12 V, 50 Hz
Power requirement: 20 VA (ZAC 1/20)
  50 VA (ZAC 1/50)
  36 VA (ZAC 1/36L)
Electricity protection: IP 55 (ZAC 1/20, ZAC 1/50)
  IP 20 (ZAC 1/36L)
Weight: 0,8 kg (ZAC 1/20, ZAC 1/36L)
  1,2 kg (ZAC 1/50)
 
 
Requirements for setting up the construction
ZAC 1/20, ZAC 1/50
  1. Set-up supply of electricity 230 V,50 Hz – cable CYKY 3Cx1,5
  2. Set-up niche for flush mounting – size as per installed source
  3. Distribution to each device is carried out by cable CYKY 2Ax1,5
ZAC 1/36 L
  1. It is installed on the DIN-rail - width of 4 modules
 
 
Figure
ZAC 1/20
 
ZAC 1/50
 
 
 
 
 
Product title
ZAC 1/20 - 
power supply for up to 3 devices - 230V, 50Hz
ZAC 1/50 - 
power supply for up to 8 devices - 230V, 50Hz
ZAC 1/36L - 
power supply for up to 6 devices - 230V, 50Hz
Tootekood: AZP-ZAC 1-20 ,   Tarneaeg: 3-4 nädalad ,   Viimistlus:
106,72 €

Pissuaari vahesein URC, roostevaba teras AISI 304 Portinox URC-SEP

1092х383х80 мм

Tootekood: PURC-SEP ,   Tarneaeg: 14-30 päeva ,   Viimistlus:
808,03 €

Automatne kummikute pesur düüsiga, 12V, 50Hz RST AZP Brno AMO 01

Automatne kummikute pesur düüsiga, 12V, 50Hz

automatic washing system for wellingtons with jets - 12V, 50Hz

 

AMO 01 is a stainless steel automatic washing system for wellingtons with sensor-controlled water nozzles. When stepping into the washing chamber of the system (scanning zone) water starts to flow from the nozzles automatically and wellingtons are cleaned of dirt. Water stops flowing with a certain time delay after the foot has been removed from the scanning zone.
AMO 01 is designed for a single pipe inlet of pre-mixed water from the circulation or water pre-mixed by means of a thermostatic valve.
The AMO 01 automatic washing system is intended mainly for operations with slight shoe contamination where quick washing at maximum water savings is guaranteed.

Package contents

  • body of the washing machine
  • photocell head
  • nozzles – 8 pcs
  • electromagnetic valves 2 pcs
  • corner valves with filter
  • connecting hoses
 
Radius of sensor 0 – 0,4 m
Water inlet G 1/2“
Water pressure 0,3 – 1,0 MPa
Outlet d = 32 mm
Inner dimensions of the trough 250 x 400 x 280 mm
Electricity protection IP 55
Power supply 12 V, 50 Hz
Power requirement 10 VA
Source of power supply ZAC 1/20 (max. 2 x AMO 01)
  ZAC 1/50 (max. 5 x AMO 01)
Weight 18 kg
  • Set up water inlet as per picture
  • Set up outlet d = 32 mm
  • Set up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
Tootekood: AZP-AMO 01 ,   Tarneaeg: 3-5 nädalat ,   Viimistlus:
2444,43 €

PEGU.ee – iga segisti ja vannitoa aksessuaar on valitud isikliku teadmise ja kogemusega.Teid teenindab sanitaartehnika ekspert Aleksandr Gumenjuk, 25+ aasta kogemusega. info@pegu.ee · +372 515 0681