Pesurenn AZP Brno ilma segistiavadeta. L=3000mm
Kaubamärk:
Ühik: tk
Tarneaeg: 4-6 nädala
Müüja: PEGU OÜ
✅ Juunikuu eripakkumine
Kasuta ostukorvis koodi PEGU-JUUNI2025 ja saa soodustust toodetele, mis ei kuulu teistesse kampaaniatesse.
✅ Pakkumine kehtib kuni 30. juunini.
PEGU.ee – tark valik kvaliteeti hindavale ostjale.
Pesurenn AZP Brno ilma segistiavadeta. L=3000mm
AUL 06st. steel wall mounted wash trough
| general dimensions | L x 430 x 190 mm |
| outlet | opening for 6/4" standrd washbasin siphon |
| material | st. steel AISI 304, thickness 1,5 mm (AUL 06.1 a AUL 06.2 - 1,2 mm) |
AUL 06 is a stainless steel wall mounted trough with casing. Its construction enables installation of outflow arms, or sensor-controlled taps. The standard version of the trough is without openings for the taps. Openings can be made on a request.
We offer also washbasins AUM 030 and AUM 029 in similar design. Thus long troughs and smaller washbasins can be combined in one space with no need for design change.
Outlet of trough is standardly on the right side (in frontal view). Left sided outlet can be made on order (must be noted) AUL 06 wash trough is intended, thanks to its design, for washrooms and changing rooms in food production industry.
Lenght of the troughs can be adapted according to project’s data sheet. Data sheet acceptance is must.
Package contents
- st. steel wash trough
- cantilever
- mounting material
left sided outlet
openings 33 mm for faucets
other lengths
other dimensions
Seinakraan, vooliku otsaga
Pronks
1/2"
93,00 €
CANAL wall-mounted wash trough
Ref. 120300
Wall-mounted wash trough for 4 posts - 2,400mm
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1mm for the bowl, 1.5mm for surroundand fixing brackets.
Easy to install: no joint concealers to install, light wash trough.
Drainage on the right.
With no tap hole.
Supplied with 1 ½" waste.
Without overflow.
Supplied with brackets and fixing elements.
CE marked. Complies with European standard EN 14296.
Weight: 20kg.
Possible to add a bacteriostatic 304 stainless steel splashback (ref. 0011800007).
| Height | 250mm |
|---|---|
| Length | 2400mm |
| Width | 400mm |
| Thickness | 1mm (basin) et 1.5mm (edge and fixing brackets) |
| Finish | 304 polished satin stainless steel |
1239,00 €
Bucket sink in stainless steel for wall mounting. Supplied with stainless steel wall panel, supporting bracket and 3 1/2" x 2" grated waste, and reducer from 2" - 1 1/2".
Saappaidenpesuallas 7130
Saappaidenpesuallas 7130 on omilla jaloilla seisova allas, joka on suunniteltu käytettäväksi esim. päiväkodeissa kumisaappaiden ja kuravaatteiden huuhteluun sekä teollisuudessa hätäsuihkualtaaksi.
Tuote on kotimainen ruostumattomasta teräksestä valmistettu monikäyttöinen allas. Altaan reunat on pyöristetty turvallisiksi.
Altaan ulkomitat ovat 600x600x350 mm, sisämitat 550x550x250 mm. Allasta valmistetaan myös erikoismitoin.
Altaan mukana toimitetaan pohjaventtiili sekä pohjatulppa helmiketjulla. Altaan jaloissa on säätötassut, joilla se on helppo asentaa suoraan.
Joogifontään põranda/sein mehaaniline R/V teras AISI304
AFO 01.S
stainless steel drinking fountain with pressure valve designed to stand and to be attached to wall
AFO 01.S is a drinking fountain of stainless steel with pressure valve designed to stand and to be attached to wall. Water runs for the time for which the valve is pressed plus the pre-set period after it is released; thus the jet can be rinsed.
Water supply is provided by a flexible hose, trap comprises an elastic flexible couple. Flexible design of water supply and outflow allows variable and easy connection of the drinking fountain as well as its dismounting.
Automatic drinking fountain (with a sensor) can be supplied per order.
AFO 01.S is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order. For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).
Package contents
- Stainless housing with cone
- Pressure valve with jet
- Flexible hose outflow
- Fixing and connecting material
| dimensions | 330 x 900 x 365 mm |
| outlet | d = 40 mm |
| water inlet | G 1/2" |
| water pressure | 0,2 – 0,6 MPa, recommended 0,3 MPa |
| weight | 12 kg |
- Set up water outlet d = 40 mm
- Set up water inlet G 1/2"
