Tootegrupid
Kaubamärgid
Blogi Uudised
Esileht » Presto antivandaalne dušisüsteem 500 S eelsegatud veele sein 1.5mm-max 200mm 38240
Presto antivandaalne dušisüsteem 500 S eelsegatud veele sein 1.5mm-max 200mm 38240 Zoom

Presto antivandaalne dušisüsteem 500 S eelsegatud veele sein 1.5mm-max 200mm 38240

Tootekood: P38240
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva

‼️ Kasuta promokoodi TALV2026 ostukorvis ja saa soodustust – ainult täna!

▼ Loe edasi: ...

✅ Populaarsed tooted Tallinna laos kohe olemas — tarneaeg 1–3 päeva või tule ise järele.

✅ Kui toode on tellimisel, uuri lähemalt — saame tihti pakkuda oodatust kiiremat tarnet: info@pegu.ee

✅ Kõikidele toodetele garantii 2 aastat ja 14‑päevane tagastusõigus.

✅ Automaatne arve e‑postile. E‑arve soovijatel palume lisada märge kommentaaridesse.

ℹ️ Hind sisaldab käibemaksu.

ESTO järelmaks kuumaks al. 43,61 €
Hind:
513,00 €
Kuumakse alates: 43,61 €
Kogus: - +

Presto antivandaalne dušisüsteem 500 S eelsegatud veele sein 1.5mm-max 200mm 38240

38240

> Working pressure :

1 to 5 bar

> Flow :

6 l/min at 3 bar with integrated flow limiter Anti-water-hammering design

> Flow time :

Adjustable by washer 30 second timer (-10/+5 seconds)

> Hydraulic supply :

Inlet M G 1/2" (15x21) - Cold or premixed water

> Thermal resistance :

Resistant to a temperature of 75°C for 30 minute thermal shock

> Security :

Patented anti-blocking "S" system to avoid the water to flow continuously

> Delivered with :

1 Cross-partition control (15 to 300 mm thick) 1 Tap P 500 S® for shower
Shower head with 17° or 25° directional grid 2 washers for flow time adjustment

1 Flat gasket
1 Nut 1/2'' (15x21) Instruction manual

> Standards & approvals :

Brass body in accordance with EN 1982, EN 12164, EN 12165 200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227

Failid

Sarnased tooted
Joogifontaan, pikk toru 3/8" keere 311QU12
Joogifontaan, pikk toru 3/8" keere 311QU12

Joogifontaan, pikk toru 3/8" keere 311QU12

Tootekood: DE-311QU1 ,   Tarneaeg: 7 päeva ,   Viimistlus:
188,00 €
AZP Brno adapter 1-3 punkte ZAC 1-20
AZP Brno adapter 1-3 punkte ZAC 1-20

AZP Brno adapter 1-3 punkte ZAC 1-20

 
 

ZAC 1/20, ZAC 1/50, ZAC 1/36L

power supply

    
 
 
 

ZAC is a safe source of voltage supply intended to power automatic sanitary equipment made by AZP Brno, Ltd. 

The source of power supply consists of a safety transformer produced in accordance with ČSN IEC 742+A1 standards. All kinds of sensors can be connected to these sources in random combinations, as can other devices with a supply voltage of 12 V, 50 Hz (total power requirement either 20 VA, 50 VA or 36 VA). 

ZAC 1/20 and ZAC 1/50 are independent sources, 1/36L ZAC is the source for the location on the DIN-rail (4 modules).

 
 
Version types
ZAC 1/20 - source of power supply with output 20 VA
ZAC 1/50 - source of power supply with output 50 VA
ZAC 1/36L - source of power supply with output 36 VA
 
Source of power supply can be placed at a maximum distance of 30 m from the connected appliance. 
 
Basic technical information
Input voltage: 230 V, 50 Hz
Output voltage: 12 V, 50 Hz
Power requirement: 20 VA (ZAC 1/20)
  50 VA (ZAC 1/50)
  36 VA (ZAC 1/36L)
Electricity protection: IP 55 (ZAC 1/20, ZAC 1/50)
  IP 20 (ZAC 1/36L)
Weight: 0,8 kg (ZAC 1/20, ZAC 1/36L)
  1,2 kg (ZAC 1/50)
 
 
Requirements for setting up the construction
ZAC 1/20, ZAC 1/50
  1. Set-up supply of electricity 230 V,50 Hz – cable CYKY 3Cx1,5
  2. Set-up niche for flush mounting – size as per installed source
  3. Distribution to each device is carried out by cable CYKY 2Ax1,5
ZAC 1/36 L
  1. It is installed on the DIN-rail - width of 4 modules
 
 
Figure
ZAC 1/20
 
ZAC 1/50
 
 
 
 
 
Product title
ZAC 1/20 - 
power supply for up to 3 devices - 230V, 50Hz
ZAC 1/50 - 
power supply for up to 8 devices - 230V, 50Hz
ZAC 1/36L - 
power supply for up to 6 devices - 230V, 50Hz
Tootekood: AZP-ZAC 1-20 ,   Tarneaeg: 3-4 nädalad ,   Viimistlus:
106,72 €
Nicolazzi käsidushi otsik metallist pronks C7111 BZ
Nicolazzi käsidushi otsik metallist pronks C7111 BZ

Nicolazzi käsidushi otsik metallist pronks C7111 BZ

Pronks BZ

Tootekood: NC7111BZ ,   Tarneaeg: 7-8 nädala ,   Viimistlus:
179,80 €
Pissuaari kraan seinapealne 1/2" -1/2" PRESTO 31001
Pissuaari kraan seinapealne 1/2" -1/2" PRESTO 31001

Pissuaari kraan seinapealne 1/2" -1/2" PRESTO 31001

Pissuaari kraan seinapealne 1/2" -1/2" PRESTO

31001

Pissuaarikraan 1/2-1/2" 6 sek 

Isesulguva mehhanismiga, kroom

Tootekood: P31001 ,   Tarneaeg: 7 päeva ,   Viimistlus:
114,00 €
Veekraan kontaktivaba WaterTap DAN DRYER 388
Veekraan kontaktivaba WaterTap DAN DRYER 388

Veekraan kontaktivaba WaterTap

DAN DRYER 388

388-WATERTAP DECK MOUNTED


DAN DRYER WaterTap is with automatic sensor for touch-free operation is a hygienic solution for all private and commercial washrooms.

The water faucet is part of a complete product line, which also includes hand dryer and soap dispenser. The product line is available for either deck or wall mounting.

The water tap features a minimalist, modern design in stainless steel with satin finish. It is easy to operate and to clean. 

 
 

PRODUCT DESCRIPTION

• Table top mounting.

• Activation distance adjustable between 20-120 mm.

• Water pressure: 10-15 PSI.  

• Water flow less than 3,8 l/m.  

• Stainless steel with satin finish.

• Infra-red sensor and elektronic timer.

• 2-year warranty.

 

SPECIFICATIONS  
Product number: 388 / EAN no. 5-709818-003887
Technical data:

Touch-free water tap in stainless steel with satin finish for table top mounting. Infra-red sensor and electronic timer, water pressure 10-100 PSI, waterflow less than 3,8 l/min.
Dimensions H: 170 mm, W: 50 mm, D: 220 mm
Net Weight: 2.1 kg
Colour: Stainless steel with satin finish
 
Tootekood: DAN388 ,   Tarneaeg: 14-21 päeva ,   Viimistlus:
1084,00 €

PEGU.ee — Iga segisti ja aksessuaar on valitud isikliku teadmise ja kogemusega. Teid nõustab **sanitaartehnika peaspetsialist, 25+ aastat kogemust.** Kontakt: info@pegu.ee · +372 515 0681