Parema teenuse pakkumiseks kasutab meie veebileht küpsiseid (cookies). Veebilehte kasutades või vajutades OK, nõustud meie privaatsuspoliitikaga.
Loe lähemalt
NOVA2 wiper for floor. Incl. rubber hook & rubber strap. Available in 6 finishes. The different finishes make it easy to match with existing bathroom interior.
Cabinet and nozzle made in brushed stainless steel.
Powerful commutator motor with carbon brushes.
5-year warranty.
SPECIFICATIONS
Product number:
244 / EAN no. 5-709818-002446
Technical data:
Touch-free hand dryer with housing in brushed, stainless steel. Infra-red sensor and electronic timer, drying cycle 10-15 sec., IPX1, 230 V, 50/60 Hz, 1600 W, Class I (earthed). 78 dBA.
Dimensions
H: 286 mm, W: 205 mm, D: 180 mm. Pipe: L: 100 mm, D: 70 mm
BEHIND THE MIRROR STAINLESS STEEL TOWEL PAPER DISPENSER
Manual folded paper towel dispenser made of AISI 304 stainless steel, to be installed behind a mirror
Reference:
DTM2106
• Manual folded paper towel dispenser, to be installed behind a mirror, with a high quality AISI 304 stainless steel body, designed and manufactured by Mediclinics S.A.
• Designed to be installed just behind a mirror and above the bathroom sink to maximize space within the bathroom.
• Easy to refill, it requires little space and it is a great choice for install in minimalist collective bathrooms.
• It can contain up to 600 Z-fold or 400 C-fold paper towels, without the need of any paper adapter.
• Body, back plate and paper outlet made of a single piece of folded and welded AISI 304 stainless steel.
• The geometry of the paper outlet minimizes the tear of the paper towel.
• Screws and plugs for brick wall mounting supplied
PAPER TOWEL DISPENSER LOCKABLE WITH DRAWER FOR MOUNTING BEHIND FIXED WALL MIRROR WP176-1
298 x 385 x 135 mm ca. 500 paper towels
Paper towel dispenser in robust, germ-reducing and easy-care stainless steel (AISI 304).
For mounting behind fixed mirror on site.
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
With deep-drawn paper removal opening for easy paper removal.
Designed for approx. 500 standard paper towels in zigzag fold. Paper size (folded): 240-250 mm x 100-115 mm. Accessible for refilling from the front through lockable drawer that can be pulled out downwards.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws. Depth of substructure installation: min. 140 mm. Height above vanity unit: min. 285 mm.
Delivery includes fixing material, self-adhesive information label „Paper“ and one pack of paper towels.
PAPER TOWEL DISPENSER FOR MOUNTING BEHIND FIXED WALL MIRROR WP 176
298 x 360 x 120 mm ca. 500 paper towels
Paper towel dispenser in robust, germ-reducing and easy-care stainless steel (AISI 304).
For mounting behind fixed mirror on site.
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
With deep-drawn paper removal opening for easy paper removal.
Designed for approx. 500 standard paper towels in zigzag fold. Paper size (folded): 240-250 mm x 100-115 mm. Accessible for refilling through spring-clip flap from below.
Mounting: With four screws. Depth of substructure installation: min. 120 mm. Height above vanity unit: min. 160 mm.
Delivery includes fixing material, self-adhesive information label „Paper“ and one pack of paper towels.
Paper towel dispenser in robust, germ-reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Further available surfaces: see below.
With deep-drawn paper removal opening for easy paper removal.
Designed for approx. 250 standard paper towels in zigzag- or c-fold. Paper size (folded): 240-250 mm x 100-115 mm. Accessible for refilling through lockable front flap.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts can be replaced as modules.
Installation dimensions: 300 x 150 mm
Mounting: With four screws on the inside, sideways.
Delivery includes fixing material and one pack of paper towels.
Paper towel dispenser in robust, germ-reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Further available surfaces: see below.
With deep-drawn paper removal opening for easy paper removal.
Designed for approx. 250 standard paper towels in zigzag- or c-fold. Paper size (folded): 240-250 mm x 100-115 mm. Accessible for refilling through lockable front flap.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts can be replaced as modules.
Installation dimensions: 300 x 150 mm
Mounting: With four screws on the inside, sideways.
Delivery includes fixing material and one pack of paper towels.
Waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Further available surfaces: see below.
Equipped with removable mesh basket. Capacity approx. 18 l. Accessible through lockable door with self-closing, flame-retardant disposal flap.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts can be replaced as modules.
Mounting: With screws off-floor below vanity unit, or as an option with console or base for a surcharge.
Delivery includes fixing material.
Weight (in kg): 7,1
Suggested text for specifications:
Waste bin in stainless steel (AISI 304) for under-counter mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Equipped with removable mesh basket. Capacity approx. 18 l. Accessible through lockable door with self-closing, flame-retardant disposal flap. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material.
Waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Further available surfaces: see below.
Equipped with removable mesh basket. Capacity approx. 18 l. Accessible through lockable door with self-closing, flame-retardant disposal flap.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts can be replaced as modules.
Mounting: With screws off-floor below vanity unit, or as an option with console or base for a surcharge.
Delivery includes fixing material.
Weight (in kg): 7,1
Suggested text for specifications:
Waste bin in stainless steel (AISI 304) for under-counter mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Equipped with removable mesh basket. Capacity approx. 18 l. Accessible through lockable door with self-closing, flame-retardant disposal flap. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material.
Liquid soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
For mounting behind fixed mirror on site.
One-hand operated and non-drip soap pump with 200 ml tank.
Tank with large, lockable refill opening.
Designed for standard liquid soaps or hand lotions. Accessible for refilling through spring stop pin and by removing from below.
Wear parts can be replaced as modules.
Mounting: With two screws through key holes and one optional anti-theft hole in the back wall. Depth of substructure installation: min. 120 mm Height above vanity unit: min. 160 mm
Delivery includes fixing material and self-adhesive information label „Soap“.
Waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; visible surfaces satin finished and brushed. Further available surfaces: see below.
Equipped with removable mesh basket. Capacity approx. 43 l. Accessible through lockable door. Waste disposal from above through an optional waste disposal ring or flap.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and one optional anti-theft hole in the back wall off-floor below vanity unit, or as an option with console or base for a surcharge.
Waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; visible surfaces satin finished and brushed. Further available surfaces: see below.
Equipped with removable mesh basket. Capacity approx. 43 l. Accessible through lockable door. Waste disposal from above through an optional waste disposal ring or flap.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and one optional anti-theft hole in the back wall off-floor below vanity unit, or as an option with console or base for a surcharge.
DISINFECTANT DISPENSER FOR MOUNTING BEHIND FIXED WALL MIRROR 950ML TANK WP 174-7
71 x 230 x 121 mm
Disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
For mounting behind fixed mirror on site.
One-hand operation disinfectant pump with 950 ml tank.
Tank with large, lockable refill opening.
Designed for standard disinfectants. Accessible for refilling through spring stop pin and by removing from below.
Note: Not approved for medical areas.
Wear parts can be replaced as modules.
Mounting: With two screws through key holes and one optional anti-theft hole in the back wall. Depth of substructure installation: min. 160 mm Height above vanity unit: min. 280 mm
Delivery includes fixing material and self-adhesive information label „Disinfectant“.
Weight (in kg): 0,7
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
727049
Suggested text for specifications:
Disinfectant dispenser in stainless steel (AISI 316L) for mounting behind fixed mirror. One-hand operation disinfectant pump with 950 ml tank. Designed for standard disinfectants. Accessible for refilling through spring stop pin and by removing from below. Delivery includes fixing material and self-adhesive information label Disinfectant.
DISINFECTANT DISPENSER FOR MOUNTING IN CABINET 950ML TANK WP 173-7
71 x 229 x 110 mm
Disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
For mounting in cabinet on site.
One-hand operation disinfectant pump with 950 ml tank.
Tank with large, lockable refill opening.
Designed for standard disinfectants. Refillable from the top.
Note: Not approved for medical areas.
Wear parts can be replaced as modules.
Mounting: With two screws through key holes and one optional anti-theft hole in the back wall.
Delivery includes fixing material and self-adhesive information label „disinfectant“.
Weight (in kg): 0,5
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
727178
Suggested text for specifications:
Disinfectant dispenser in stainless steel (AISI 316L) for mounting in cabinet. One-hand operation disinfectant pump with 950 ml tank. Designed for standard disinfectants. Refillable from the top. Delivery includes fixing material and self-adhesive information label Disinfectant.
SENSOR DISINFECTANT DISPENSER FOR MOUNTING BEHIND FIXED WALL MIRROR 950ML TANK WP 174E-7
86 x 242 x 150 mm
Sensor disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
For mounting behind fixed mirror on site.
With EWAR® eModule touch-free operated disinfectant pump with 950 ml tank.
Tank with large, lockable refill opening.
Designed for standard disinfectants. Accessible for refilling through spring stop pin and by removing from below.
Note: Not approved for medical areas.
eModule battery-powered with two 1.5 V Baby/LR14 batteries. Power supply available as an option.
Wear parts can be replaced as modules.
Mounting: With two screws through key holes and one optional anti-theft hole in the back wall. Depth of substructure installation: min. 185 mm Height above vanity unit: min. 270 mm
Delivery includes fixing material, batteries and self-adhesive information label „Disinfectant“.
Weight (in kg): 1,3
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
727046
Suggested text for specifications:
Sensor disinfectant dispenser in stainless steel (AISI 316L) for mounting behind fixed mirror. With touch-free operated disinfectant pump with 950 ml tank. Designed for standard disinfectants. Accessible for refilling through spring stop pin and by removing from below. Delivery includes fixing material, batteries and self-adhesive information label Disinfectant.
SENSOR DISINFECTANT DISPENSER FOR MOUNTING IN CABINET 950ML TANK WP 173E-7
87 x 248 x 120 mm
Sensor disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
For mounting in cabinet on site.
With EWAR® eModule touch-free operated disinfectant pump with 950 ml tank.
Tank with large, lockable refill opening.
Designed for standard disinfectants. Refillable from the top.
Note: Not approved for medical areas.
eModule battery-powered with two 1.5 V Baby/LR14 batteries. Power supply available as an option.
Wear parts can be replaced as modules.
Mounting: With three screws through key holes in the back wall.
Delivery includes fixing material, batteries and self-adhesive information label „disinfectant“.
Weight (in kg): 1,1
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
727186
Suggested text for specifications:
Sensor disinfectant dispenser in stainless steel (AISI 316L) for mounting in cabinet. With touch-free operated disinfectant pump with 950 ml tank. Designed for standard disinfectants. Refillable from the top. Delivery includes fixing material, batteries and self-adhesive information label Disinfectant.
SENSOR - LIQUID SOAP DISPENSER FOR MOUNTING IN CABINET 200ML TANK WP 173E-1
87 x 174 x 120 mm
Choose product variant
Sensor liquid soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
For mounting in cabinet on site.
With EWAR® eModule touch-free operated and non-drip soap pump with 200 ml tank.
Tank with large, lockable refill opening.
Designed for standard liquid soaps or hand lotions. Refillable from the top.
eModule battery-powered with two 1.5 V Baby/LR14 batteries. Power supply available as an option.
Wear parts can be replaced as modules.
Mounting: With three screws through key holes in the back wall
Delivery includes fixing material and self-adhesive information label „Soap“.
Weight (in kg): 1,0
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
727184
Suggested text for specifications:
Sensor liquid soap dispenser in stainless steel (AISI 316L) for mounting in cabinet. With touch-free operated and non-drip soap pump with 200 ml tank. Designed for standard liquid soaps or hand lotions. Refillable from the top. Delivery includes fixing material, batteries and self-adhesive information label Soap.
SENSOR - LIQUID SOAP DISPENSER FOR MOUNTING IN CABINET 950(500)ML BOTTLE WP 173E
87 x 293(255) x 129(121) mm
Choose product variant
Sensor liquid soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
For mounting in cabinet on site.
With EWAR® eModule touch-free operated and non-drip soap pump.
Designed for standard 500 ml or 950 ml disposable bottles of liquid soap or hand lotion. Refillable from the top.
Also refillable with large container using the plug-in tank as an option.
eModule battery-powered with two 1.5 V Baby/LR14 batteries. Power supply available as an option.
Wear parts can be replaced as modules.
Mounting: With three screws through key holes and one optional anti-theft hole in the back wall.
Delivery includes fixing material, batteries, self-adhesive information label „Soap“ and first fill with soap.
Weight (in kg): 1,6
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
727183
Suggested text for specifications:
Sensor liquid soap dispenser in stainless steel (AISI 316L) for mounting in cabinet. With touch-free operated and non-drip soap pump. Designed for standard 500 ml or 950 ml disposable bottles of liquid soap or hand lotion. Refillable from the top. Delivery includes fixing material, batteries, self-adhesive information label Soap and first fill with soap.
SENSOR - LIQUID SOAP DISPENSER FOR MOUNTING BEHIND WALL MIRROR 200ML TANK WP 174E
86 x 207 x 148 mm
Choose product variant
Sensor liquid soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
For mounting behind fixed mirror on site.
With EWAR® eModule touch-free operated and non-drip soap pump with 200 ml tank.
Tank with large, lockable refill opening.
Designed for standard liquid soaps or hand lotions. Accessible for refilling through spring stop pin and by removing from below.
eModule battery-powered with two 1.5 V Baby/LR14 batteries. Power supply available as an option.
Wear parts can be replaced as modules.
Mounting: With two screws through key holes and one optional anti-theft hole in the back wall. Depth of substructure installation: min. 185 mm Height above vanity unit: min. 200 mm
Delivery includes fixing material and self-adhesive information label „Soap“.
Weight (in kg): 1,2
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
727038
Suggested text for specifications:
Sensor liquid soap dispenser in stainless steel (AISI 316L) for mounting behind fixed mirror. With touch-free operated and non-drip soap pump with 200 ml tank. Designed for standard liquid soaps or hand lotions. Accessible for refilling through spring stop pin and by removing from below. Delivery includes fixing material, batteries and self-adhesive information label Soap.
Sensor liquid soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
For mounting behind fixed mirror on site.
With EWAR® eModule touch-free operated and non-drip soap pump.
Designed for standard 500 ml or 950 ml disposable bottles of liquid soap or hand lotion. Accessible for refilling through spring stop pin and by removing from below.
Also refillable with large container using the plug-in tank as an option.
eModule battery-powered with two 1.5 V Baby/LR14 batteries. Power supply available as an option.
Wear parts can be replaced as modules.
Mounting: With two screws through key holes and one optional anti-theft hole in the back wall. Depth of substructure installation: min. 185 mm Height above vanity unit: min. 250(280) mm
Delivery includes fixing material, batteries, self-adhesive information label „Soap“ and first fill with soap.
Weight (in kg): 2,2
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
727039
Suggested text for specifications:
Sensor liquid soap dispenser in stainless steel (AISI 316L) for mounting behind fixed mirror. With touch-free operated and non-drip soap pump. Designed for standard 500 ml or 950 ml disposable bottles of liquid soap or hand lotion. Accessible for refilling through spring stop pin and by removing from below. Delivery includes fixing material, batteries, self-adhesive information label Soap and first fill with soap.
Liquid soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
For mounting behind fixed mirror on site.
One-hand operated and non-drip soap pump.
Designed for standard 500 ml or 950 ml disposable bottles of liquid soap or hand lotion. Accessible for refilling through spring stop pin and by removing from below.
Also refillable with large container using the plug-in tank as an option.
Wear parts can be replaced as modules.
Mounting: With two screws through key holes and one optional anti-theft hole in the back wall. Depth of substructure installation: min. 130 mm Height above vanity unit: min. 220(250) mm
Delivery includes fixing material, self-adhesive information label „Soap“ and first fill with soap.
Weight (in kg): 1,5
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
727036
Suggested text for specifications:
Liquid soap dispenser in stainless steel (AISI 316L) for mounting behind fixed mirror. One-hand operated and non-drip soap pump. Designed for standard 500 ml or 950 ml disposable bottles of liquid soap or hand lotion. Accessible for refilling through spring stop pin and by removing from below. Delivery includes fixing material, self-adhesive information label Soap and first fill with soap.
SOAP DISPENSER FOR MOUNTING IN CABINET 200ML TANK WP 173-1
67 x 150 x 88 mm
Choose product variant
Liquid soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
For mounting in cabinet on site.
One-hand operated and non-drip soap pump with 200 ml tank.
Tank with large, lockable refill opening.
Designed for standard liquid soaps or hand lotions. Refillable from the top.
Wear parts can be replaced as modules.
Mounting: With two screws through key holes and one optional anti-theft hole in the back wall.
Delivery includes fixing material and self-adhesive information label „Soap“.
Weight (in kg): 0,7
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
727174
Suggested text for specifications:
Liquid soap dispenser in stainless steel (AISI 316L) for mounting in cabinet. One-hand operated and non-drip soap pump with 200 ml tank. Designed for standard liquid soaps or hand lotions. Refillable from the top. Delivery includes fixing material and self-adhesive information label Soap.
SOAP DISPENSER FOR MOUNTING IN CABINET 950(500)ML BOTTLE WP 173
87 x 289 (251) x 130 mm
Choose product variant
Liquid soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
For mounting in cabinet on site.
One-hand operated and non-drip soap pump.
Designed for standard 500 ml or 950 ml disposable bottles of liquid soap or hand lotion. Refillable from the top.
Also refillable with large container using the plug-in tank as an option.
Wear parts can be replaced as modules.
Mounting: With two screws through key holes and one optional anti-theft hole in the back wall.
Delivery includes fixing material, self-adhesive information label „Soap“ and first fill with soap.
Weight (in kg): 2,7
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
727173
Suggested text for specifications:
Liquid soap dispenser in stainless steel (AISI 316L) for mounting in cabinet. One-hand operated and non-drip soap pump. Designed for standard 500 ml or 950 ml disposable bottles of liquid soap or hand lotion. Refillable from the top. Delivery includes fixing material, self-adhesive information label Soap and first fill with soap.
FOAM SOAP DISPENSER FOR MOUNTING BEHIND WALL MIRROR WP 174-5
69 x 250 x 127 mm 400 ml foam soap concentrate
Choose product variant
Foam soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
For mounting behind fixed mirror on site.
One-hand operated and non-drip foam soap pump.
Designed for standard 400 ml foam soap concentrate. Accessible for refilling through spring stop pin and by removing from below.
Wear parts can be replaced as modules.
Mounting: With two screws through key holes and one optional anti-theft hole in the back wall. Depth of substructure installation: min. 160 mm Height above vanity unit: min. 250 mm
Delivery includes fixing material, self-adhesive information label „Soap“ and first fill with foam soap concentrate.
Weight (in kg): 1,5
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
727048
Suggested text for specifications:
Foam soap dispenser in stainless steel (AISI 316L) for mounting behind fixed mirror. One-hand operated and non-drip foam soap pump. Designed for standard 400 ml foam soap concentrate. Accessible for refilling through spring stop pin and by removing from below. Delivery includes fixing material, self-adhesive information label Soap and first fill with foam soap concentrate.
FOAM SOAP DISPENSER FOR MOUNTING IN CABINET WP 173-5
67 x 247 x 115 mm 400 ml foam soap concentrate
Choose product variant
Foam soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
For mounting in cabinet on site.
One-hand operated and non-drip foam soap pump.
Designed for standard 400 ml foam soap concentrate. Refillable from the top.
Wear parts can be replaced as modules.
Mounting: With two screws through key holes and one optional anti-theft hole in the back wall.
Delivery includes fixing material, self-adhesive information label „Soap“ and first fill with foam soap concentrate.
Weight (in kg): 0,9
AVAILABLE SURFACES
ORDER NUMBERS
satin finished (standard)
727185
Suggested text for specifications:
Foam soap dispenser in stainless steel (AISI 316L) for mounting in cabinet. One-hand operated and non-drip foam soap pump. Designed for standard 400 ml foam soap concentrate. Refillable from the top. Delivery includes fixing material, self-adhesive information label Soap and first fill with foam soap concentrate.