Tootegrupid

Delabie WC Raam + kontaktivaba infrajuhend Tempofix 3

Tootekood: DE-564005-464000
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
Hind: 1500,00 €
1350,00 €
Kuumakse alates: 114,75 €
Kogus: - +
   - või -   

DESCRIPTION

TEMPOFIX 3 self-supporting frame system with electronic WC valve

Ref. 564005-464000

Provisional availability 1st half 
2021

Please contact the sales office to check availability.
Self-supporting frame system for wall-hung WCs:
- Black powder-coated steel frame.
- Fixes to load-bearing floors.
- Frame height can be adjusted from 0 - 200mm (with 1m mark).
- Ø 32mm flush tube with Ø 55mm connection washer.
- PVC soil pipe, Ø 100mm outlet to be glued to waterproof seal, with 2 setting positions.
- Delivered pre-mounted.
- Compatible with solid walls from 10 - 120mm.
- 10-year warranty.

Fitted with a TEMPOMATIC dual control F¾" electronic direct flush valve:
- 230/6V mains supply (cable and transformer supplied).
- Satin finish stainless steel wall plate 186 x 186mm and chrome-plated metal button with integrated electronics.
- Waterproof recessing housing.
- Detection delay is 10 seconds.
- Voluntary activation (push-button with anti-blocking) or automatically when the user leaves.
- "Intelligent" automatic rinsing (flush volume adapts according to use).
- 3 programmes (rinsing volume can be set according to type of WC pan).
- Hygienic duty flush, every 24 hours (can be adjusted to 12 hours or OFF) after the last use.
- Backflow prevention device inside the housing.
- Integrated stopcock and flow rate adjuster.
- Compatible with sea water and grey water.

Technical characteristics: see TEMPOMATIC dual control ref. 464SBOX-464000.

Kit contents:
(564005): frame system, soil pipe Ø 100mm, flush tube, recessed housing with cover, valve configured for system flush, vacuum breaker, stopcock, connection accessories.
(464000): control plate, transformer, collar for waterproofing, solenoid valve, cartridge.
 

TECHNICAL CHARACTERISTICS

TEMPOFIX 3 self-supporting frame system with electronic WC valve

Ref. 564005-464000
Supply Mains supply 230/6V
Connector ¾"
Technology Electronic and time flow
Height 1000 - 1320mm
Depth 177mm
Width 350mm
Finish Satin finish stainless steel
Sarnased tooted

PRODUCT DESCRIPTION

• Winner of a Red Dot Design Award!

• Holds approx. 9,5 dl liquid soap (= 800-950 doses).

• Battery-operated. Connection to power supply via a transformer.

• An intelligent sensor automatically sets the best sensor range. 

• LED light indicates when dispenser is in use.

• Comes in trendy matt black and classic white as standard. 

• Also available in all RAL colours and coated with different prints. 

• Top plate in 6 optional standard designs

• 2-year warranty.

 

SPECIFICATIONS 
Product number: 3050 / EAN no. 5-709818-030500
Technical data:
Touch-free soap dispenser for liquid soap/disinfectant. White-painted steel housing (RAL 9003, gloss 60). Equipped with top plate. Capacity: 9,5 dl. Battery-operated.
Dimensions H: 330 mm, W: 139 mm, D: 127 mm
Net Weight: 2.3 kg
Tootekood: DAN3050 96 ,   Tarneaeg: 14-21 päeva
494,00 €

PRODUCT DESCRIPTION

• Winner of a Red Dot Design Award!

• Holds approx. 9,5 dl liquid soap (= 800-950 doses).

• Battery-operated. Connection to power supply via a transformer.

• An intelligent sensor automatically sets the best sensor range. 

• LED light indicates when dispenser is in use.

• Available in all RAL colours. 

• Comes in trendy matt black and classic white as standard. 

• Also available coated with different prints. 

• Top plate in 6 optional standard designs

• 2-year warranty.

 

SPECIFICATIONS 
Product number: 3052 / EAN no. 5-709818-030524
Technical data:
Touch-free soap dispenser for liquid soap/disinfectant. Steel housing painted in optional RAL colour. Equipped with top plate. Capacity: 9,5 dl. Battery-operated.
Dimensions H: 330 mm, W: 139 mm, D: 127 mm
Net Weight: 2.3 kg
Tootekood: DAN3052 90 ,   Tarneaeg: 14-21 päeva
625,00 €
Antivandaalne R/V teras piezo dušisi nupp, eelsegatud veele,  ilma el.adaptorita
 
 

AUS 11

Pressure button-controlled shower for heat regulated water

 

 

   
 
 
 

AUS 11 is a new type of shower fitting for single shower control. The fitting is designated for premixed water – with one water inlet and shower outlet elbow. Water is released and closed by an anti-vandal pressure button connected to electronics and an electromagnetic valve. The fitting is covered by a rust-free anti-vandal cover to prevent damage. 

The mounting system has been designed so as to make removing the cover without using tools impossible with no bolt or screw being visible. The cover can be "pushed into" the wall level even if the mount box has been walled to an incorrect depth. 

AUS 11 is identical to AUS 1P with a different design and very resistant cover sheet. 

Electronics can work in two modes: 

1) The button works on the START/STOP basis – water release/closing. If the water is not turned off upon the time adjusted by the user or manager (e.g. 20 seconds), the electronic system itself instructs water stopping. The user must press again to start water running. This significantly saves water as the user reduces the showering time. 

2) The button works on the START/STOP basis. After the time adjusted by the manager (e.g. 3 minutes) expires there is a forced break when water cannot be released. During this time, the user is forced to leave the shower or wait. This prevents needless showering – water wasting. 

 

 
Basic technical information
Water input: G 1/2“
Water pressure: 1 - 10 Bar (0,1 – 1,0 MPa)
Time of water flow: 10 s – 42,5 min in mode 1
  0 s - 42,5 min in mode 2
Power supply: 12 V, 50 Hz
Power requirement: 6 VA
Source of power supplz: ZAC 1/20 (max. 3× AUS 11)
  ZAC 1/50 (max. 8× AUS 11)
Weight: 2,0 kg
 
 
Requirements for setting up the construction
  1. Water installation set up as per picture
  2. Set-up alcove 150 x 75 mm for installation casket
  3. Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
 
 
Complete delivery
  • installation casket
  • input and output bolting
  • electromagnetic valve
  • spherical valve
  • covering metal plate with piezo button
  • electronics
 
 
Made to order
  • SP 1 – shower arm with water flow of 9 l/min
  • SP 2 – shower arm with water flow of 7 l/min
  • SP 3 – shower arm with water flow of 7 l/min
  • ZAC - source of power supply 12V, 50Hz
 
 
Figure
 
 
A - water inlet G 1/2"
C - electricity supply cable 12 V, 50 Hz 
G - water outlet into shower armG 1/2"
 
 
 
 
Download information about the product
AUS 11 data for projectants - ( 84 kB )
 
Tootekood: AZP-AUS 11 ,   Tarneaeg: 3-4 nädalad
375,00 €

COMBINATION PAPER TOWEL-, SENSOR - SOAP DISPENSER 950ML BOTTLE AND WASTE BIN WP 500E

298 x 1348 x 120 mm
ca. 250 paper towels / sensor with 950 ml soap bottle / 11 l

 

  • Combination consisting of a sensor liquid soap dispenser, paper towel dispenser and
    a waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
    Further available surfaces: see below.
  • Sensor liquid soap dispenser with EWAR® eModule touch-free operated soap pump. 
  • Designed for standard 950 ml disposable bottles of liquid soap or hand lotion. 
  • Also refillable with large container using the plug-in tank as an option. 
  • Paper towel dispenser with deep-drawn paper removal opening for easy paper removal. 
  • Designed for approx. 250 standard paper towels in zigzag fold.
    Paper size (folded): 240-250 mm x 100-115 mm. 
  • Inspection slots to indicate fill level. 
  • Accessible for refilling through lockable front flap with fall protection. 
  • Waste bin equipped with removable mesh basket.
    Capacity approx. 11 l. Accessible through lockable door with self-closing, flame-retardant disposal flap. 
  • Keyed alike cylinder locks in corrosion-resistant zinc die-casting. 
  • eModule battery-powered with two 1.5 V Baby/LR14 batteries.
    Power supply available as an option.
  • Wear parts and front panels can be replaced as modules.
  • Installation dimensions: 300 x 1350 x 110 mm
  • Mounting: With eight screws in wall opening through fixing holes in the side walls. 
  • Delivery includes fixing material, batteries, first fill with soap and one pack of paper towels.
  • Weight (in kg): 15,8
Tootekood: WAG-WP500e ,   Tarneaeg: 14-21 päeva
1361,83 € (5%)
1433,50 €

Surface automatic foam soap dispenser

 

Automatic wall-mounted foam soap dispenser of 1 L capacity, manufactured in stainless steel AISI 304, 0.8 mm thick. 

Available in four finishes (white, black, bright and satin) these soap dispenser models have a functional, robust and trendy design that matches the new range of Mediclinics bathroom accessories. This allows this soap dispenser to blend into any space perfectly.

Suitable for high traffic facilities and for public use.

Dispenses liquid soaps with neutral pH, chlorine free and density between 0.9 and 1.35 kg/dm3. Surgical soaps and soaps with solid abrasive particles are not supported.
 
Tootekood: MDJF0038AB ,   Tarneaeg: 7-14 päeva
211,50 € (10%)
235,00 €

Projektide hinnapäringud ja tooteinfo kättesaadavusega seotud küsimused palume saata e-mailile info@pegu.ee