Dushiiste Mediclincs seinale roostevaba teras AISI304
Tarneaeg: 14-21 päeva
"Minu maitsed on lihtsad: parimaga jään kergesti rahule."
• Reversible solid phenolic folding shower seat, waterproof, black edged, frame manufactured in stainless steel AISI 304, satin finish and with a wall bracket to assure the maximum safety for the end-user.
• Suitable to install inside the shower.
• Designed to withstand a maximum load of 113 kg, provided it is properly mounted to the wall.
• Structural assembly shall be of welded construction and all exposed edges and corners shall be radiused and/or deburred.
• Model shall comply with accessible design guidelines (including ADAAG in the U.S.A.).
• “L-shaped” seat, made of solid phenolic ivory-colored with black edges, waterproof, shatterproof and easy to maintain. Reversible for left –or right- hand installation in the field. Secured to the frame with stainless steel carriage bolts and acorn nuts.
• AISI 304 stainless steel frame, satin finish.
• Non-slip and warm to the touch.
• Slots for water drainage.
• Opening and closing system made of AISI 304 stainless steel, satin finish.
Lift-up shower seat, with ALU leg
ALU lift-up shower seat with leg, for people with reduced mobility.
Large plastic slats, comfortable and easy to maintain.
Folding leg guided by an articulated arm.
Structure made from white aluminium tube Ø 25mm x 2mm.
Dimensions: 407 x 360 x 480mm.
Folded dimensions: 82 x 545mm.
Seat height: 480mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
Lift-up shower seat, with ALU leg
|Finish||White powder-coated aluminium|
Normbau Inox Care inva käepide 2053060 L = 600mm
Inox Care Grab bar/Towel holder 2053060, c/c = 600mm
c/c = 600mm
made of stainless steel, material No. 1.4301 (A2, AISI 304), 32mm dia., brushed finish, 70mm dia., steel cored roses, concealed fixing. Rose inners with compensation of wall diff erences.
Maximum loading permitted: 175 kgs.
Supplied with 6mm dia x 70mm stainless Torx screws and plugs for solid masonry.
Klappiste seinale ülespööratav 350x370cm HEWI Must
- construction consisting of wall bracket, bar, seat bracket and seat surface
- anti-slip, textured synthetic seat surface in HEWI colours 98 (signal white), 92 (anthracite grey) and 90 (jet black)
- wall bracket and bracket made of high-quality plastic in HEWI colours 98 (signal white), 92 (anthracite grey) and 90 (jet black), matching the seat surface
- additional wall support allows increased legroom as no floor support is necessary
- the slightly curved shape of the seat defines the sitting position and provides comfortable support
- seat can be folded up to save space
- seat depth when folded up 44 mm
- maintenance-free, permanently smooth-running joint
- load capacity up to 150 kg
- 350 mm wide, 370 mm deep and 230 mm high
- seat 350 mm wide and 340 mm deep
- for installation with corrosion-free and tested HEWI fixing material for different wall constructions (to be ordered separately)
- sealing tape and sealing discs for sealing the fixing points according to DIN 18534 are included in the scope of delivery
Normbau Inox Care Lift-up inva käepide ülestüstetav 2050010 vario, suspendable, L = 600mm, siena kinnitusega
Inox Care Lift-up support rail 2050010 vario, suspendable, L = 600mm, with base plate
Lift up support rail vario with base plate,
length 600mm, 32mm dia.,
made of stainless steel, material No. 1.4301 (A2 AISI 304), brushed finish, left or right hand application, space required in vertical position 193mm from wall, with adjustable brake, easy installation by mounting to a base plate.
Base plate, made of stainless steel for balanced wall mounting, concealed screw fixing, supplied without fixing screws and plugs, conform to German standard DIN 18040 1-2, maximum loading permitted: 125 kgs.
850mm length conform to German standard DIN 18040-1/2, Austrian standard ÖNORM B1600.
TÜV PRODUKT SERVICE certified.
Select appropriate fixing material to suit site conditions. Can be fitted with paper roll holder 2050 300 may be added at a later stage.