KAN-therm kollektorrühm InoxFlow sulgventiilidega (RVV seeria), 7 haru
KAN-therm InoxFlow kollektorrühm RVV-seeriast on usaldusväärne ja kvaliteetne lahendus kütte- ja jahutussüsteemidele. Iga haru on varustatud sulgventiiliga, mis võimaldab individuaalset juhtimist ja hooldust.
Omadused:
-
G3⁄4" ühendusadapterite ja liitmikute tugi
-
Harudevaheline kaugus: 50 mm
-
Igal harul oma sulgventiil
-
Ülemine kollektor: voolu sissetulek
-
Alumine kollektor: tagasivool
-
Kollektoritel G1" sisekeere
-
Komplektis ei ole sulgekatteid
Sobib ideaalselt põrandakütte ja radiaatoriringide ühendamiseks.
KAN-therm InoxFlow kollektor segamisseadmega (USFP-seeria) – 4 haru
Kollektorirühm USFP-seeriast koos segamissüsteemi, voolumõõturite ja servomootori ventiilidega. Elektroonilise pumbaga. Sobib paneelküttesüsteemidele kuni 15 kW.
Tootekirjeldus:
KAN-therm InoxFlow kollektorirühm USFP-seeriast sisaldab:
-
voolumõõtureid (reguleerimisvahemik: 0–2,5 l/min)
-
ventiile M30x1,5 servoajamitele (ülemisel talal)
-
segamissüsteemi koos elektroonilise pumbaga
-
messingist kinnitusklambrid ja heliisolatsiooniga tugi
-
G¾" ühendused kontuuridele, G1" sisekeere põhitorul
Märkus:
Toodet ei tohi kasutada madalatemperatuuriliste soojusallikatega. Maksimaalne soojuskoormus kuni 15 kW (nt 16x2 mm toru, 100 m kontuur, 15 cm samm, 40/30 °C).
Kasutusvaldkond:
Ideaalne lahendus vesipõrandaküttesüsteemide jaoks, kus on vaja segada kõrgetemperatuurilist söödet madalamaks ja tagada täpne vooluregulatsioon igas küttetsoonis.
KAN-therm kollektorrühm InoxFlow sulgventiilidega (RVV seeria), 2 haru
KAN-therm InoxFlow kollektorrühm RVV-seeriast on usaldusväärne ja kvaliteetne lahendus kütte- ja jahutussüsteemidele. Iga haru on varustatud sulgventiiliga, mis võimaldab individuaalset juhtimist ja hooldust.
Omadused:
-
G3⁄4" ühendusadapterite ja liitmikute tugi
-
Harudevaheline kaugus: 50 mm
-
Igal harul oma sulgventiil
-
Ülemine kollektor: voolu sissetulek
-
Alumine kollektor: tagasivool
-
Kollektoritel G1" sisekeere
-
Komplektis ei ole sulgekatteid
Sobib ideaalselt põrandakütte ja radiaatoriringide ühendamiseks.
KAN-therm kollektorrühm InoxFlow sulgventiilidega (RVV seeria), 5 haru
KAN-therm InoxFlow kollektorrühm RVV-seeriast on usaldusväärne ja kvaliteetne lahendus kütte- ja jahutussüsteemidele. Iga haru on varustatud sulgventiiliga, mis võimaldab individuaalset juhtimist ja hooldust.
Omadused:
-
G3⁄4" ühendusadapterite ja liitmikute tugi
-
Harudevaheline kaugus: 50 mm
-
Igal harul oma sulgventiil
-
Ülemine kollektor: voolu sissetulek
-
Alumine kollektor: tagasivool
-
Kollektoritel G1" sisekeere
-
Komplektis ei ole sulgekatteid
Sobib ideaalselt põrandakütte ja radiaatoriringide ühendamiseks.
KAN-therm kollektorrühm InoxFlow sulgventiilidega (RVV seeria), 10 haru
KAN-therm InoxFlow kollektorrühm RVV-seeriast on usaldusväärne ja kvaliteetne lahendus kütte- ja jahutussüsteemidele. Iga haru on varustatud sulgventiiliga, mis võimaldab individuaalset juhtimist ja hooldust.
Omadused:
-
G3⁄4" ühendusadapterite ja liitmikute tugi
-
Harudevaheline kaugus: 50 mm
-
Igal harul oma sulgventiil
-
Ülemine kollektor: voolu sissetulek
-
Alumine kollektor: tagasivool
-
Kollektoritel G1" sisekeere
-
Komplektis ei ole sulgekatteid
Sobib ideaalselt põrandakütte ja radiaatoriringide ühendamiseks.
Damixa valamusifoon metallist G 1 1/4" 48480846 harjatud teras PVDSiphon Brushed Copper PVD
Siphon steel pvd
149,00 €
Newicon Brabantia prügikast 12l pedaaliga vaikselt sulguv Metallic Gold
PEDAL BIN NEWICON
• Silently closing lid and specially easy pedal operation
• Odor-proof sealing
• Easy to clean - removable insert
• Stable stand thanks to a non-slip bottom and tilt protection
• Easy to move - clever handle with lid hinge
• Unproblematic use - made of high-quality materials
• Brabantia bin liner size C/10-12L
Capacity: 12 Liter
Diameter: 24,0 cm
Height: 40,0 cm
Width: 24,0 cm
Depth: 32,5 cm
80,00 €
Be-Line® anthracite straight grab bar Ø 35mm, L. 600mm
Ref. 511906C
Be-Line® grab bar Ø 35mm, for people with reduced mobility.
For use as a handrail or grab bar for WCs, showers or baths.
Aluminium tube, 3mm thick. Solid aluminium fixing points.
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip.
Metallised anthracite powder-coated finish provides a good visual contrast with the wall.
Uniform surface for easy maintenance and hygiene.
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance.
Concealed fixings.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
600mm centre-to-centre.
Tested to over 200kg. Maximum recommended user weight: 135kg.
Technical features
Be-Line® anthracite straight grab bar Ø 35mm, L. 600mm
Ref. 511906C
Length | 600mm |
---|---|
Width to the wall | 38mm |
Thickness | 3mm |
Finish | Metallised anthracite powder-coated aluminium |
150,00 €
Be-Line drop-down support rail, L. 650mm, anthracite
Ref. 511960C
Be-Line drop-down support rail for people with reduced mobility.
In the lowered position use as a grab bar, as a support for standingand for assisting movement, for WCS or showers.
Allows side access in the raised position.
Removable: easy to remove with anti-theft locking system. Reduces the number of barsin a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility.
Slowed down descent. Retained in upright position.
Aluminium tube.
Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip.
Metallised anthracite powder-coated aluminium finish provides a good visual contrast with the wall.
Uniform surface for easy maintenance and hygiene.
Concealed fixings secured to wall by a 304 stainless steel plate, 5mm thick.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Dimensions: 650 x 210 x 120mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
TECHNICAL FEATURES
Be-Line drop-down support rail, L. 650mm, anthracite
Ref. 511960C
Height | 210mm |
---|---|
Length | 650mm |
Width | 120mm |
Finish | Powder-coated metallised anthracite aluminium |
195,00 €
Köögisegisti pikk käepide Idral 09490 3/4"M
Single hole single lever mixer with side clinic lever. 3/4“ male outlet
COMPOSITION
- Brass chromed tap
- Glass filled nylon clinical lever
- Ceramic disks cartridge
- With stainless steel flexible hoses 1/2" and non-return
valves
OPERATING CHARACTERISTICS
Operating pressure: Min 1 – max 6 bar
Water inlet temperature: 5 – 70 °C
244,00 €
7010 Seebiriiul Reframe koos klaasipuhastiga Harjatud roostevaba teras
7010
Reframe | Soap shelf and shower wiper
Soap shelf and shower wiper Brushed steel
Unique soap shelf with hidden magnets in the wall fitting to give the wiper a permanent, functional and practical home.
The soap shelf is made of a strengthened steel plate with a groove to drain the water off it. Around the edge is a thin laser-cut ‘anti-slip’ barrier, to help stop shampoo and other bathroom products sliding off the shelf when it is wet.
The wiper has just two parts – a high-quality silicone element and a strengthened steel frame. This design distributes the pressure quite evenly across the whole surface and ensures that it is cleaned effectively and consistently. The wiper has silicone bumpers on the ends, to protect tiles and other surfaces from scratches. The silicone element is very hard- wearing and lasts a long time.
The pack contains fittings, screws and an Unbraco key for assembly.
334,48 €
7011 Seebiriiul Reframe koos klaasipuhastiga Poleeritud roostevaba teras
7011
Reframe | Soap shelf and shower wiper
Soap shelf and shower wiper Polished steel
Unique soap shelf with hidden magnets in the wall fitting to give the wiper a permanent, functional and practical home.
The soap shelf is made of a strengthened steel plate with a groove to drain the water off it. Around the edge is a thin laser-cut ‘anti-slip’ barrier, to help stop shampoo and other bathroom products sliding off the shelf when it is wet.
The wiper has just two parts – a high-quality silicone element and a strengthened steel frame. This design distributes the pressure quite evenly across the whole surface and ensures that it is cleaned effectively and consistently. The wiper has silicone bumpers on the ends, to protect tiles and other surfaces from scratches. The silicone element is very hard-wearing and lasts a long time.
The pack contains fittings, screws and an Unbraco key for assembly.
436,15 €
7012 Seebiriiul Reframe koos klaasipuhastiga Viimistlus: Messing
7012
Reframe | Soap shelf and shower wiper
Soap shelf and shower wiper Brass
Unique soap shelf with hidden magnets in the wall fitting to give the wiper a permanent, functional and practical home.
The soap shelf is made of a strengthened steel plate with a groove to drain the water off it. Around the edge is a thin laser-cut ‘anti-slip’ barrier, to help stop shampoo and other bathroom products sliding off the shelf when it is wet.
The wiper has just two parts – a high-quality silicone element and a strengthened steel frame. This design distributes the pressure quite evenly across the whole surface and ensures that it is cleaned effectively and consistently. The wiper has silicone bumpers on the ends, to protect tiles and other surfaces from scratches. The silicone element is very hard-wearing and lasts a long time.
The pack contains fittings, screws and an Unbraco key for assembly.
468,68 €
7013 Seebiriiul Reframe koos klaasipuhastiga Viimistlus: Vask
7013
Reframe | Soap shelf and shower wiper
Soap shelf and shower wiper Copper
Unique soap shelf with hidden magnets in the wall fitting to give the wiper a permanent, functional and practical home.
The soap shelf is made of a strengthened steel plate with a groove to drain the water off it. Around the edge is a thin laser-cut ‘anti-slip’ barrier, to help stop shampoo and other bathroom products sliding off the shelf when it is wet.
The wiper has just two parts – a high-quality silicone element and a strengthened steel frame. This design distributes the pressure quite evenly across the whole surface and ensures that it is cleaned effectively and consistently. The wiper has silicone bumpers on the ends, to protect tiles and other surfaces from scratches. The silicone element is very hard-wearing and lasts a long time.
The pack contains fittings, screws and an Unbraco key for assembly.
413,78 €
7014 Seebiriiul Reframe koos klaasipuhastiga Viimistlus: PVD Matt Must
7014
Reframe | Soap shelf and shower wiper
Soap shelf and shower wiper Black
Unique soap shelf with hidden magnets in the wall fitting to give the wiper a permanent, functional and practical home.
The soap shelf is made of a strengthened steel plate with a groove to drain the water off it. Around the edge is a thin laser-cut ‘anti-slip’ barrier, to help stop shampoo and other bathroom products sliding off the shelf when it is wet.
The wiper has just two parts – a high-quality silicone element and a strengthened steel frame. This design distributes the pressure quite evenly across the whole surface and ensures that it is cleaned effectively and consistently. The wiper has silicone bumpers on the ends, to protect tiles and other surfaces from scratches. The silicone element is very hard-wearing and lasts a long time.
The pack contains fittings, screws and an Unbraco key for assembly.
462,58 €
TRANSLATE PAGE
change to you language
Santehnika ja vannitoaaksessuaarid e-poes PEGU.EE
E-MAIL: info@pegu.ee
Кonsultatsioon +372 515 0681
8.00-21.00