Tootegrupid
Zoom

Delabie 512111P antivandaalne elektrooniline vedel- või vahtseebi dosaator, harj. rst

Tootekood: DE-512111P
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
Hind:
494,00 €
Kuumakse alates: 41,99 €
Kogus: - +
   - või -   

Delabie 512111P antivandaalne elektrooniline vedel- või vahtseebi dosaator,  harj. rst

Electronic liquid or foam soap dispenser

Seinale paigaldatav elektrooniline seebi dosaator.
Vedel- või vahtseebi dosaator.
Vandaalikindel mudel ristseinale (TC) kuni 110mm.
Käsitsi kontakti pole: infrapunarakk tuvastab käed automaatselt.
Kroomitud 304 roostevabast terasest tila.
Iseseisev elektrooniline seade paigaldamiseks valamu alla või teeninduskanalisse.
Automaatne seebi dosaator: vooluvõrk 230/6V trafoga.
Taimepõhise vedelseebi jaoks maksimaalse viskoossusega 3000 mPa.s või spetsiaalsele vahtseebile.
Tila kogupikkus: 115 mm.
Tarnitakse 1,20 m painduva toruga kaugpaakide jaoks.
 
Настенный электронный дозатор для мыла.
Дозатор для жидкого или пенного мыла.
Антивандальная модель для поперечной стены (TC) до 110 мм.
Нет ручного контакта: инфракрасная ячейка автоматически обнаруживает руки.
Носик из хромированной нержавеющей стали 304.
Независимый электронный блок для установки под умывальником или в канале обслуживания.
Автоматический дозатор мыла: питание от сети с трансформатором 230/6В.
Для жидкого мыла на растительной основе с максимальной вязкостью 3000 мПа·с или специального пенного мыла.
Общая длина носика: 115 мм.
Поставляется с гибкой трубкой длиной 1,20 м для удаленных резервуаров.

 

 

Ref. 512111P

Wall-mounted electronic soap dispenser. 
Liquid or foam soap dispenser.
Vandal-resistant model for cross wall (TC) up to 110mm. 
No manual contact: infrared cell detects hands automatically. 
Chrome-plated 304 stainless steel spout. 
No waste pump dispenser.
Independent electronic unit for installation beneath the washbasin or in a service duct.
Automatic soap dispenser: mains supply with 230/6V transformer.
For vegetable-based liquid soap with maximum viscosity of 3,000 mPa.s or specific foam soap.
Total spout length: 115mm. 
Supplied with 1.20m flexible tube for remote tanks. 
 

TECHNICAL CHARACTERISTICS

Electronic liquid or foam soap dispenser

Ref. 512111P
Supply Mains supply 230/6V
Connector 1/2"
Technology Infrared detection
Height 115mm (electronic unit)
Length 115mm
Spout length 98mm
Finish Chrome-plated 304 stainless steel
Sarnased tooted

Seebidosaator 0,2l seinale,  satiin

LIQUID SOAP DISPENSER WP 107

70 x 170 x 90 mm
200 ml soap tank

  • Liquid soap dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
    Further available surfaces: see below.
  • One-hand operated and non-drip soap pump with 200 ml tank. 
  • Tank with large, lockable refill opening.
  • Designed for standard liquid soaps or hand lotions. 
  • Inspection slot to indicate fill level. 
  • Accessible for refilling through lockable, hinged housing. 
  • Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
  • Wear parts can be replaced as modules.
  • Mounting: With two screws through key holes and one optional anti-theft hole in the back wall. 
  • Delivery includes fixing material.
  • Weight (in kg): 0,8
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 727307
highly polished 731307
(coloured) plastic powder - coating 728307
Tootekood: WAG-WP107S ,   Tarneaeg: 4 nädalad
237,60 € (5%)
250,10 €
Tootekood: MDJ0031C ,   Tarneaeg: 7-14 päeva
117,00 € (10%)
130,00 €
Wall mounted soap dispenser. 200ml. The different finishes make it easy to match with existing bathroom or kitchen interior or to brighten up a classic room with small spots of color and personality.
Height: 196mm
Width: 63mm
Depth: 100mm
Diameter: Ø63mm
Weight: 1 kg.
Designer: Bønnelycke mdd
Material: Stainless steel
Tootekood: FRON1939 ,   Tarneaeg: 14-21 päeva
209,70 € (10%)
233,00 €
Wall mounted soap dispenser. 200ml. The different finishes make it easy to match with existing bathroom or kitchen interior or to brighten up a classic room with small spots of color and personality.
Height: 196mm
Width: 63mm
Depth: 100mm
Diameter: Ø63mm
Weight: 1 kg.
Designer: Bønnelycke mdd
Material: Stainless steel
Tootekood: FRON1939-B ,   Tarneaeg: 14-21 päeva
209,70 € (10%)
233,00 €
Antivandaalne R/V teras piezo dušisi nupp, eelsegatud veele,  ilma el.adaptorita
 
 

AUS 11

Pressure button-controlled shower for heat regulated water

 

 

   
 
 
 

AUS 11 is a new type of shower fitting for single shower control. The fitting is designated for premixed water – with one water inlet and shower outlet elbow. Water is released and closed by an anti-vandal pressure button connected to electronics and an electromagnetic valve. The fitting is covered by a rust-free anti-vandal cover to prevent damage. 

The mounting system has been designed so as to make removing the cover without using tools impossible with no bolt or screw being visible. The cover can be "pushed into" the wall level even if the mount box has been walled to an incorrect depth. 

AUS 11 is identical to AUS 1P with a different design and very resistant cover sheet. 

Electronics can work in two modes: 

1) The button works on the START/STOP basis – water release/closing. If the water is not turned off upon the time adjusted by the user or manager (e.g. 20 seconds), the electronic system itself instructs water stopping. The user must press again to start water running. This significantly saves water as the user reduces the showering time. 

2) The button works on the START/STOP basis. After the time adjusted by the manager (e.g. 3 minutes) expires there is a forced break when water cannot be released. During this time, the user is forced to leave the shower or wait. This prevents needless showering – water wasting. 

 

 
Basic technical information
Water input: G 1/2“
Water pressure: 1 - 10 Bar (0,1 – 1,0 MPa)
Time of water flow: 10 s – 42,5 min in mode 1
  0 s - 42,5 min in mode 2
Power supply: 12 V, 50 Hz
Power requirement: 6 VA
Source of power supplz: ZAC 1/20 (max. 3× AUS 11)
  ZAC 1/50 (max. 8× AUS 11)
Weight: 2,0 kg
 
 
Requirements for setting up the construction
  1. Water installation set up as per picture
  2. Set-up alcove 150 x 75 mm for installation casket
  3. Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
 
 
Complete delivery
  • installation casket
  • input and output bolting
  • electromagnetic valve
  • spherical valve
  • covering metal plate with piezo button
  • electronics
 
 
Made to order
  • SP 1 – shower arm with water flow of 9 l/min
  • SP 2 – shower arm with water flow of 7 l/min
  • SP 3 – shower arm with water flow of 7 l/min
  • ZAC - source of power supply 12V, 50Hz
 
 
Figure
 
 
A - water inlet G 1/2"
C - electricity supply cable 12 V, 50 Hz 
G - water outlet into shower armG 1/2"
 
 
 
 
Download information about the product
AUS 11 data for projectants - ( 84 kB )
 
Tootekood: AZP-AUS 11 ,   Tarneaeg: 3-4 nädalad
375,00 €

Projektide hinnapäringud ja tooteinfo kättesaadavusega seotud küsimused palume saata e-mailile info@pegu.ee