Kaubamärk
Tootegrupid

Käetugi vanni, Inva käetoed

Käetugi vanni, Inva käetoed

Käetugi vannitoas või invakäetoed on spetsiaalsed abivahendid, mis on mõeldud kasutamiseks vannitoas või muudes märgades või libedates tingimustes, et tagada kasutajatele lisaturvalisus ja mugavus. Need võivad olla paigaldatavad käetoed, mis on kinnitatud seina külge või vanni äärele ning aitavad kasutajatel hoida tasakaalu ja tugevust, või need võivad olla põrandale paigaldatavad käetoed, mis annavad toetust kasutajatele, kellel on raskusi liikumisega või kes vajavad abi vannitoa kasutamisel.

Käetugede disain võib varieeruda, olenevalt vajadustest ja kasutuskohast. Inva käetugedel võib olla spetsiaalne ergonoomiline kuju, pehmendused, libisemisvastased omadused ja muud turvalisuse tagamiseks mõeldud omadused. Käetugede materjalid võivad olla vastupidavad, roostekindlad ja kergesti puhastatavad, et tagada pikaajaline kasutamine vannitoas, kus niiskus ja vesi võivad olla problemaatilised.

Käetugi vannitoas või invakäetoed on olulised abivahendid eakatele, liikumispuudega inimestele, vigastatutele või teistele, kes vajavad vannitoas lisaturvalisust ja tugevust. Need võivad olla oluline lisavarustus hoolekandeasutustes, invavannitubades, haiglates, hotellides ja muudes kohtades, kus turvalisus ja mugavus on prioriteet.

Järjesta:
Kuva: Nimekirjana / Võrgustikuna

Be-line corner grab bar 2 walls, anthracite 
Ref. 511941C

Be-Line corner grab bar Ø 35mm for WCs, showers or baths. 
Use as a shower rail and to support the user in an upright position. 
Helps and secures entry and movement in the shower also with getting in and out of the bath.
Helps with the transfer from a wheelchair to the toilet seat.
Dimensions: 695 x 695mm. 
Aluminium tube thickness 3mm. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Metallised anthracite powder-coated aluminium provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Tested to over 200kg. Maximum recommended user weight: 135kg. 

Technical features 

Be-line corner grab bar 2 walls, anthracite 
Ref. 511941C

Length 695mm
Width 695mm
Width to the wall 38mm
Thickness 3mm
Finish Metallised anthracite powder-coated aluminium
Tootekood: DE-511941C ,   Tarneaeg: 14-21 päeva
270,00 €

Be-line corner grab bar 2 walls, white 
Ref. 511941W

Be-Line corner grab bar Ø 35mm for showers. 
Use as a shower rail and to support the user in an upright position. 
Helps and secures entry and movement in the shower also with getting in and out of the bath.
Helps with the transfer from a wheelchair to the toilet seat. 
Dimensions: 695 x 695mm. 
Aluminium tube thickness 3mm. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Matte white powder-coated aluminium finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Tested to over 200kg. Maximum recommended user weight: 135kg. 

Technical features 

Be-line corner grab bar 2 walls, white 
Ref. 511941W

Length 695mm
Width 695mm
Width to the wall 38mm
Thickness 3mm
Finish Matte white powder-coated aluminium
Tootekood: DE-511941W ,   Tarneaeg: 14-21 päeva
270,00 €

Be-Line sliding shower head holder 
Ref. 511911C

Be-Line sliding shower head holder. 
Metallised anthracite. 
Support for tilting shower head. 
Easy-to-operate ergonomic grip to adjust the height of the shower head holder. 
Slides by pressing the grip or pulling on the flexible hose. 

Technical features 

Be-Line sliding shower head holder 
Ref. 511911C

Depth 48mm
Length 113mm
Width 80mm
Finish Metallised anthracite
Tootekood: DE-511911C ,   Tarneaeg: 14-21 päeva
48,00 €

Be-Line sliding shower head holder 
Ref. 511911W

Be-Line sliding shower head holder. 
Matte white. 
Support for tilting shower head. 
Easy-to-operate ergonomic grip to adjust the height of the shower head holder.
Slides by pressing the grip or pulling on the flexible hose. 

 

TECHNICAL FEATURES 

Be-Line sliding shower head holder 
Ref. 511911W

Depth 48mm
Length 113mm
Width 80mm
Finish Matte white
Tootekood: DE-511911W ,   Tarneaeg: 14-21 päeva
48,00 €

Metallised anthracite shelf for grab bars for showers 
Ref. 511922C

Metallised anthracite shelf for grab bars, for showers. 
Installed against the all on the bar. 
Anti-theft locking screw. 
Ideal for shower gel or soap. 
2 hooks for gloves. 

TECHNICAL FEATURES 

Metallised anthracite shelf for grab bars for showers 
Ref. 511922C

Height 71mm
Depth 70mm
Length 165mm
Tootekood: DE-511922C ,   Tarneaeg: 14-21 päeva
35,00 €

White shelf for grab bars for showers 
Ref. 511922W

White shelf for grab bars, for showers. 
Installed against the all on the bar. 
Anti-theft locking screw. 
Ideal for shower gel or soap. 
2 hooks for gloves. 

TECHNICAL FEATURES 

White shelf for grab bars for showers 
Ref. 511922W

Height 71mm
Depth 70mm
Length 165mm
Tootekood: DE-511922W ,   Tarneaeg: 14-21 päeva
35,00 €

DESCRIPTION

Cover plate for Be-Line drop-down rail 
Ref. 511950C

Be-Line metallised anthracite cover plate without fixings plate. 
Conceals fixing screws when the drop-down support rail is removed. 
Reduces the number of drop-down rails in a facility, allowing installation only when required. 
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility.

 

TECHNICAL FEATURES 

Cover plate for Be-Line drop-down rail 
Ref. 511950C

Height 230mm
Depth 17mm
Width 105mm
Finish Metallised anthracite
Tootekood: DE-511950C ,   Tarneaeg: 14-21 päeva
66,00 €

Cover plate for Be-Line drop-down rail with fixings plate 
Ref. 511950FC

Be-Line metallised anthracite cover plate with fixings plate. 
Conceals fixing screws when the drop-down support rail is removed. 
Reduces the number of drop-down rails in a facility, allowing installation only when required. 
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility.
Supplied with stainless steel screws for concrete walls.

 

TECHNICAL FEATURES 

Cover plate for Be-Line drop-down rail with fixings plate 
Ref. 511950FC

Height 230mm
Depth 17mm
Width 105mm
Finish Metallised anthracite
Tootekood: DE-511950FC ,   Tarneaeg: 14-21 päeva
120,00 €

Cover plate for Be-Line drop-down rail 
Ref. 511950W

Be-Line matte white cover plate without fixings plate. 
Conceals fixing screws when the drop-down support rail is removed. 
Reduces the number of drop-down rails in a facility, allowing installation only when required. 
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility.

TECHNICAL FEATURES 

Cover plate for Be-Line drop-down rail 
Ref. 511950W

Height 230mm
Depth 17mm
Width 105mm
Finish Matte white
Tootekood: DE-511950W ,   Tarneaeg: 14-21 päeva
66,00 €

Cover plate for Be-Line drop-down rail with fixings plate 
Ref. 511950FW

Be-Line matte white cover plate with fixings plate. 
Conceals fixing screws when the drop-down support rail is removed. 
Reduces the number of drop-down rails in a facility, allowing installation only when required. 
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility.
Supplied with stainless steel screws for concrete walls.

 

TECHNICAL FEATURES 

Cover plate for Be-Line drop-down rail with fixings plate 
Ref. 511950FW

Height 230mm
Depth 17mm
Width 105mm
Finish Matte white

 

Tootekood: DE-511950FW ,   Tarneaeg: 14-21 päeva
120,00 €

Tilting mirror with long ergonomic lever 
Ref. 510201N

Tilting mirror with long ergonomic lever which facilitates adjustment of mirror angle from a sitting position or by wheelchair users. 
For combined installation: can be used from sitting or standing position. 
Quick and easy to install: just clip into place. 
Anti-theft lock. 
Bright white HR Nylon lever 
6mm thick Securit safety glass mirror. 
Mirror dimensions: 500 x 600mm. 
Can be tilted up to 20°.

 

Technical features 

Tilting mirror with long ergonomic lever 
Ref. 510201N

Height 500mm
Depth 230mm
Width 630mm
Width to the wall 70mm
Thickness 6mm
Finish Bright white HR Nylon
Tootekood: DE-510201N ,   Tarneaeg: 14-21 päeva
350,00 €

Adjustable mirror with handle 
Ref. 510202C

Tilting glass mirror with handle for easy adjustment those in a seated position or in a wheelchair.
For combined installation: can be used from sitting or standing position.
Quick and easy to install: simply clip into place. 
Anti-theft lock.
Metallised anthracite tab handle. 
Mirror made from 6mm Securit safety glass.
Mirror dimensions: 500 x 600mm.
Can be tilted up to 20°.

 

TECHNICAL FEATURES 

Adjustable mirror with handle 
Ref. 510202C

Height 500mm
Depth 84mm
Width 630mm
Width to the wall 70mm
Thickness 6mm
Finish Metallised anthracite
Tootekood: DE-510202C ,   Tarneaeg: 14-21 päeva
300,00 €

Adjustable mirror with handle 
Ref. 510202N

Tilting glass mirror with handle for easy adjustment those in a seated position or in a wheelchair.
For combined installation: can be used from sitting or standing position.
Quick and easy to install: simply clip into place. 
Anti-theft lock.
Metallised anthracite tab handle. 
Mirror made from 6mm Securit safety glass.
Mirror dimensions: 500 x 600mm.
Can be tilted up to 20°.

 

 

Technical features 

Tilting mirror with tab handle 
Ref. 510202N

Height 500mm
Depth 84mm
Width 600mm
Width to the wall 70mm
Thickness 6mm
Finish Bright white HR Nylon
Tootekood: DE-510202N ,   Tarneaeg: 14-21 päeva
300,00 €

Be-Line drop-down support rail, L. 650mm, anthracite 
Ref. 511960C

Be-Line drop-down support rail for people with reduced mobility. 
In the lowered position use as a grab bar, as a support for standingand for assisting movement, for WCS or showers. 
Allows side access in the raised position.
Removable: easy to remove with anti-theft locking system. Reduces the number of barsin a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility. 
Slowed down descent. Retained in upright position. 
Aluminium tube. 
Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Metallised anthracite powder-coated aluminium finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
Concealed fixings secured to wall by a 304 stainless steel plate, 5mm thick. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Dimensions: 650 x 210 x 120mm. 
Tested to over 200kg. Maximum recommended user weight: 135kg. 

 

TECHNICAL FEATURES 

Be-Line drop-down support rail, L. 650mm, anthracite 
Ref. 511960C

Height 210mm
Length 650mm
Width 120mm
Finish Powder-coated metallised anthracite aluminium
Tootekood: DE-511983C ,   Tarneaeg: 14-21 päeva
162,00 €

Description

Be-line® matte white angled grab bar 135°, 220 x 220mm 
Ref. 511983W

Be-line® angled grab bar 135°, Ø 35mm, for people with reduced mobility. 
For use as a handrail (horizontal part) or as a grab rail (135° part), for WCs, showers or baths. 
Universal for either left or right side. 
Aluminium tube thickness 3mm. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Matte white powder-coated aluminium; provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 
3 fixing points prevent the hand from getting trapped and simplify installation. 
Concealed fixings. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Dimensions: 220 x 220mm. 
Tested to over 200kg. Maximum recommended user weight: 135kg. 

Technical features 

Be-line® matte white angled grab bar 135°, 220 x 220mm 
Ref. 511983W

Height 220mm
Length 220mm
Width to the wall 38mm
Thickness 3mm
Finish Matte white powder-coated aluminium
Tootekood: DE-511983W ,   Tarneaeg: 14-21 päeva
162,00 €

Description

Be-Line® anthracite straight grab bar Ø 35mm, L. 300mm 
Ref. 511903C

Be-Line® grab bar Ø 35mm, for people with reduced mobility. 
For use as a handrail or grab bar for WCs, showers or baths. 
Aluminium tube, 3mm thick. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Metallised anthracite powder-coated finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
300mm centre-to-centre.
Tested to over 200kg. Maximum recommended user weight: 135kg. 

Technical features 

Be-Line® anthracite straight grab bar Ø 35mm, L. 300mm 
Ref. 511903C

Length 300mm
Width to the wall 38mm
Thickness 3mm
Finish Metallised anthracite powder-coated aluminium
Tootekood: DE-511903C ,   Tarneaeg: 14-21 päeva
96,00 €

Be-Line® matte white straight grab bar Ø 35mm, L. 300mm 
Ref. 511903W

Be-Line® straight grab bar Ø 35mm, for people with reduced mobility. 
For use as a handrail or grab bar for WCs, showers or baths. 
Aluminium tube, 3mm thick. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Matte white powder-coated aluminium provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall:minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
300mm centre-to-centre.
Tested to over 200kg. Maximum recommended user weight: 135kg. 

Technical features 

Be-Line® matte white straight grab bar Ø 35mm, L. 300mm 
Ref. 511903W

Length 300mm
Width to the wall 38mm
Thickness 3mm
Finish Matte white powder-coated aluminium
Tootekood: DE-511903W ,   Tarneaeg: 14-21 päeva
96,00 €

Description

Be-Line® anthracite straight grab bar Ø 35mm, L. 400mm 
Ref. 511904C

Be-Line® grab bar Ø 35mm, for people with reduced mobility. 
For use as a handrail or grab bar for WCs, showers or baths. 
Aluminium tube, 3mm thick. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Metallised anthracite powder-coated finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
400mm centre-to-centre.
Tested to over 200kg. Maximum recommended user weight: 135kg. 

Technical features 

Be-Line® anthracite straight grab bar Ø 35mm, L. 400mm 
Ref. 511904C

Length 400mm
Width to the wall 38mm
Thickness 3mm
Finish Metallised anthracite powder-coated aluminium
Tootekood: DE-511904C ,   Tarneaeg: 14-21 päeva
102,00 €

Be-Line® matt white straight grab bar Ø 35mm, L. 400mm 
Ref. 511904W

Be-Line® straight grab bar Ø 35mm, for people with reduced mobility. 
For use as a handrail or grab bar for WCs, showers or baths. 
Aluminium tube, 3mm thick. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Matte white powder-coated aluminium finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
400mm centre-to-centre.
Tested to over 200kg. Maximum recommended user weight: 135kg. 

 

Technical features 

Be-Line® matt white straight grab bar Ø 35mm, L. 400mm 
Ref. 511904W

Length 400mm
Width to the wall 38mm
Thickness 3mm
Finish Matte white powder-coated aluminium
Tootekood: DE-511904W ,   Tarneaeg: 14-21 päeva
102,00 €

Description

Be-Line® anthracite straight grab bar Ø 35mm, L. 500mm 
Ref. 511905C

Be-Line® grab bar Ø 35mm, for people with reduced mobility. 
For use as a handrail or grab bar for WCs, showers or baths. 
Aluminium tube, 3mm thick. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Metallised anthracite powder-coated finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
500mm centre-to-centre.
Tested to over 200kg. Maximum recommended user weight: 135kg. 

Technical features 

Be-Line® anthracite straight grab bar Ø 35mm, L. 500mm 
Ref. 511905C

Length 500mm
Width to the wall 38mm
Thickness 3mm
Finish Metallised anthracite powder-coated aluminium
Tootekood: DE-511905C ,   Tarneaeg: 14-21 päeva
114,00 €

Description

Be-Line® matte white straight grab bar Ø 35mm, L. 500mm 
Ref. 511905W

Be-Line® grab bar Ø 35mm, for people with reduced mobility. 
For use as a handrail or grab bar for WCs, showers or baths. 
Aluminium tube, 3mm thick. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Matte white powder-coated aluminium finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall:minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
500mm centre-to-centre.
Tested to over 200kg. Maximum recommended user weight: 135kg. 

 

 

Technical features 

Be-Line® matte white straight grab bar Ø 35mm, L. 500mm 
Ref. 511905W

Length 500mm
Width to the wall 38mm
Thickness 3mm
Finish Matte white powder-coated aluminium
Tootekood: DE-511905W ,   Tarneaeg: 14-21 päeva
114,00 €

Be-Line® anthracite straight grab bar Ø 35mm, L. 600mm 
Ref. 511906C

Be-Line® grab bar Ø 35mm, for people with reduced mobility. 
For use as a handrail or grab bar for WCs, showers or baths. 
Aluminium tube, 3mm thick. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Metallised anthracite powder-coated finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
600mm centre-to-centre.
Tested to over 200kg. Maximum recommended user weight: 135kg. 

Technical features 

Be-Line® anthracite straight grab bar Ø 35mm, L. 600mm 
Ref. 511906C

Length 600mm
Width to the wall 38mm
Thickness 3mm
Finish Metallised anthracite powder-coated aluminium
Tootekood: DE-511906C ,   Tarneaeg: 14-21 päeva
126,00 €

Be-Line® matte white straight grab bar Ø 35mm, L. 600mm 
Ref. 511906W

Be-Line® grab bar Ø 35mm, for people with reduced mobility. 
For use as a handrail or grab bar for WCs, showers or baths. 
Aluminium tube, 3mm thick. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Matte white powder-coated aluminium finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall:minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
600mm centre-to-centre.
Tested to over 200kg. Maximum recommended user weight: 135kg. 

Technical features 

Be-Line® matte white straight grab bar Ø 35mm, L. 600mm 
Ref. 511906W

Length 600mm
Width to the wall 38mm
Thickness 3mm
Finish Matte white powder-coated aluminium
Tootekood: DE-511906W ,   Tarneaeg: 14-21 päeva
126,00 €

Be-Line® anthracite straight grab bar Ø 35mm, L. 900mm 
Ref. 511909C

Be-Line® grab bar Ø 35mm, for people with reduced mobility. 
For use as a handrail or grab bar for WCs, showers or baths. 
Aluminium tube, 3mm thick. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Metallised anthracite powder-coated finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall:minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
900mm centre-to-centre.
Tested to over 200kg. Maximum recommended user weight: 135kg. 

 

Technical features 

Be-Line® anthracite straight grab bar Ø 35mm, L. 900mm 
Ref. 511909C

Length 900mm
Width to the wall 38mm
Thickness 3mm
Finish Metallised anthracite powder-coated aluminium
Tootekood: DE-511909C ,   Tarneaeg: 14-21 päeva
150,00 €

Be-Line® matte white straight grab bar Ø 35mm, L. 900mm 
Ref. 511909W

Be-Line® grab bar Ø 35mm, for people with reduced mobility. 
For use as a handrail or grab bar for WCs, showers or baths. 
Aluminium tube, 3mm thick. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Matte white powder-coated aluminium finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall:minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
900mm centre-to-centre.
Tested to over 200kg. Maximum recommended user weight: 135kg. 

 

Technical features 

Be-Line® matte white straight grab bar Ø 35mm, L. 900mm 
Ref. 511909W

Length 900mm
Width to the wall 38mm
Thickness 3mm
Finish Matte white powder-coated aluminium
Tootekood: DE-511909W ,   Tarneaeg: 14-21 päeva
150,00 €

Be-line® anthracite shower grab bar with sliding shower head holder 
Ref. 511946C

Be-line® straight bar Ø 35mm with sliding shower head holder for people with reduced mobility. 
Can be used as a vertical grab bar and a shower head rail for showers or baths. 
Metallised anthracite aluminium sliding shower head holder with ergonomic locking ring. 
Possible to add a sliding soap dish (order separately).
Aluminium tube thickness 3mm. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Metallised anthracite powder-coated finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the barand the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Height: 1,050mm. 
Tested to over 200kg. Maximum recommended user weight: 135kg. 

Technical features 

Be-line® anthracite shower grab bar with sliding shower head holder 
Ref. 511946C

Height 1,050mm
Width to the wall 38mm
Thickness 3mm
Finish Metallised anthracite powder-coated aluminium
Tootekood: DE-511946C ,   Tarneaeg: 14-21 päeva
246,00 €

Be-line® white shower grab bar with sliding shower head holder 
Ref. 511946W

Be-line® straight bar Ø 35mm with sliding shower head holder for people with reduced mobility. 
Can be used as a vertical grab bar and a shower head rail for showers or baths. 
Matte-white sliding shower head holder with ergonomic locking ring. 
Aluminium tube thickness 3mm. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Matte white powder-coated aluminium provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Height: 1,050mm. 
Tested to over 200kg. Maximum recommended user weight: 135kg. 

 

 

TECHNICAL FEATURES 

Be-line® white shower grab bar with sliding shower head holder 
Ref. 511946W

Height 1,050mm
Width to the wall 38mm
Thickness 3mm
Finish Matte white powder-coated aluminium
Tootekood: DE-511946W ,   Tarneaeg: 14-21 päeva
246,00 €

Be-line L-shaped grab bar, anthracite, H. 1,130mm 
Ref. 511971C

Be-line® L-shaped grab bar for showers or baths. 
Helps the user stand and move safely in the shower or bath.
Use as a shower rail by adding a shower head holder and/or soap dish. 
Can be installed with upright bar on the left or right.
Aluminium tube thickness 3mm. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Metallised anthracite powder-coated finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Dimensions: 1,130 x 450mm. 
Tested to over 200kg. Maximum recommended user weight: 135kg. 

 

Technical features 

Be-line L-shaped grab bar, anthracite, H. 1,130mm 
Ref. 511971C

Height 1,130mm
Length 450mm
Width to the wall 38mm
Thickness 3mm
Finish Metallised anthracite epoxy coated aluminium
Tootekood: DE-511971C ,   Tarneaeg: 14-21 päeva
294,00 €

Be-line® L-shaped grab bar, matte white, H. 1,130mm 
Ref. 511971W

Be-line® L-shaped grab bar for showers or baths. 
Helps the user stand and move safely in the shower or bath.
Use as a shower rail by adding a shower head holder and/or soap dish. 
Can be installed with upright bar on the left or right.
Aluminium tube thickness 3mm. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Matte white powder-coated aluminium provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Dimensions: 1,130 x 450mm. 
Tested to over 200kg. Maximum recommended user weight: 135kg. 

TECHNICAL FEATURES 

Be-line® L-shaped grab bar, matte white, H. 1,130mm 
Ref. 511971W

Height 1,130mm
Length 450mm
Width to the wall 38mm
Thickness 3mm
Finish Matte white epoxy coated aluminium
Tootekood: DE-511971W ,   Tarneaeg: 14-21 päeva
294,00 €

Be-line® L-shaped grab bar, anthracite, H. 750mm 
Ref. 511970C

Be-line® L-shaped grab bar for showers or baths. 
Helps the user stand and move safely in the shower or bath.
Use as a shower rail by adding a shower head holder and/or soap dish. 
Aluminium tube thickness 3mm. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Metallised anthracite powder-coated finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Dimensions: 750 x 450mm. 
Tested to over 200kg. Maximum recommended user weight: 135kg. 

 

Technical features 

Be-line® L-shaped grab bar, anthracite, H. 750mm 
Ref. 511970C

Height 750mm
Length 450mm
Width to the wall 38mm
Thickness 3mm
Finish Metallised anthracite epoxy coated aluminium
Tootekood: DE-511970C ,   Tarneaeg: 14-21 päeva
258,00 €

Be-line® L-shaped grab bar, white, H. 750mm 
Ref. 511970W

Be-line® L-shaped grab bar for showers or baths. 
Helps the user stand and move safely in the shower or bath.
Use as a shower rail by adding a shower head holder and/or soap dish. 
Can be installed with upright bar on the left or right.
Aluminium tube thickness 3mm. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Matte white powder-coated aluminium provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Dimensions: 750 x 450mm. 
Tested to over 200kg. Maximum recommended user weight: 135kg. 

 

TECHNICAL FEATURES 

Be-line® L-shaped grab bar, white, H. 750mm 
Ref. 511970W

Height 750mm
Length 450mm
Width to the wall 38mm
Thickness 3mm
Finish Matte white epoxy coated aluminium
Tootekood: DE-511970W ,   Tarneaeg: 14-21 päeva
258,00 €

Be-Line sliding soap dish for riser rails, white 
Ref. Be-Line sliding soap dish for riser rails, white 

Ref. 511912W

White Be-Line sliding soap dish. 
Dish suitable for shower gel or soap

 

Technical features 

Be-Line sliding soap dish for riser rails, white 
Ref. 511912W

Depth 120mm
Length 150mm
Tootekood: DE-511912W ,   Tarneaeg: 14-21 päeva
30,00 €

Be-line T-shaped shower grab bar with sliding vertical bar 
Ref. 511944C

Be-line T-shaped grab bar Ø 35mm for showers with sliding vertical bar. 
Use as a shower rail and to support the user in an upright position. 
Helps and secures entry and movement in the shower. 
Use as a shower rail by adding a sliding shower head holder and/or soap dish. 
Upright position can be adjusted during installation: can be moved to the left or the right in order to adapt the space(positioning of shower, depth of shower seat...).
Dimensions: 1,130 x 500mm. 
Aluminium tube thickness 3mm. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Metallised anthracite powder-coated aluminium provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with Ø 8 x 70mm stainless steel screws for concrete walls. 
Tested to over 200kg. Maximum recommended user weight: 135kg.

 

Technical features 

Be-line T-shaped shower grab bar with sliding vertical bar 
Ref. 511944C

Height 1,130mm
Length 500mm
Width to the wall 38mm
Thickness 3mm
Finish Metallised anthracite powder-coated aluminium
Tootekood: DE-511944C ,   Tarneaeg: 14-21 päeva
288,00 €

Be-line T-shaped shower grab bar with sliding vertical bar 
Ref. 511944W

Be-line T-shaped grab bar Ø 35mm for showers with sliding vertical bar.. 
Use as a shower rail and to support the user in an upright position. 
Helps and secures entry and movement in the shower. 
Use as a shower rail by adding a sliding shower head holder and/or soap dish. 
Upright position can be adjusted during installation: can be moved to the left or the right in order to adapt the space(positioning of shower, depth of shower seat...). 
Dimensions: 1,130 x 500mm. 
Aluminium tube thickness 3mm. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Matte white powder-coated aluminium provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with Ø 8 x 70 mm stainless steel screws for concrete walls.
Tested to over 200kg. Maximum recommended user weight: 135kg. 

 

TECHNICAL FEATURES 

Be-line T-shaped shower grab bar with sliding vertical bar 
Ref. 511944W

Height 1,130mm
Length 500mm
Width to the wall 38mm
Thickness 3mm
Finish Matte white powder-coated aluminium

 

Tootekood: DE-511944W ,   Tarneaeg: 14-21 päeva
288,00 €

Be-line corner grab bar with sliding vertical bar 
Ref. 511949C

Be-line corner grab bar with sliding vertical bar Ø 35mm, for showers. 
Use as a grab bar and to support the user in an upright position. 
Helps and secures entry and movement in the shower. 
Use as a shower rail by adding a sliding shower head holder and/or soap dish. 
Upright position can be adjusted during installation: can be moved to the left or the right in order to adapt the space(positioning of shower, depth of shower seat...). 
Dimensions: 1,130 x 695 x 6950mm. 
Aluminium tube thickness 3mm. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Metallised anthracite powder-coated finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Tested to over 200kg. Maximum recommended user weight: 135kg. 

Technical features 

Be-line corner grab bar with sliding vertical bar 
Ref. 511949C

Height 1,130mm
Length 695mm
Width 695mm
Width to the wall 38mm
Thickness 3mm
Finish Metallised anthracite powder-coated aluminium

 

 

Tootekood: DE-511949C ,   Tarneaeg: 14-21 päeva
414,00 €

Description

Be-line corner grab bar Ø 35mm with sliding vertical bar, for showers 
Ref. 511949W

Be-line corner grab bar with sliding vertical bar Ø 35mm, for showers. 
Use as a grab bar and to support the user in an upright position. 
Helps and secures entry and movement in the shower. 
Use as a shower rail by adding a sliding shower head holder and/or soap dish. 
Upright position can be adjusted during installation: can be moved to the left or the right in order to adapt the space (positioning of shower, depth of shower seat...).
Dimensions: 1,130 x 695 x 695mm. 
Aluminium tube thickness 3mm. Solid aluminium fixing points. 
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Matte white powder-coated aluminium provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 
Concealed fixings. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Tested to over 200kg. Maximum recommended user weight: 135kg. 

 

Technical features 

Be-line corner grab bar Ø 35mm with sliding vertical bar, for showers 
Ref. 511949W

Height 1,130mm
Length 695mm
Width 695mm
Width to the wall 38mm
Thickness 3mm
Finish Matte white powder-coated aluminium
Tootekood: DE-511949W ,   Tarneaeg: 14-21 päeva
414,00 €

Be-Line drop-down support rail, L. 650mm, anthracite 
Ref. 511960C

Be-Line drop-down support rail for people with reduced mobility. 
In the lowered position use as a grab bar, as a support for standingand for assisting movement, for WCS or showers. 
Allows side access in the raised position.
Removable: easy to remove with anti-theft locking system. Reduces the number of barsin a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility. 
Slowed down descent. Retained in upright position. 
Aluminium tube. 
Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Metallised anthracite powder-coated aluminium finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
Concealed fixings secured to wall by a 304 stainless steel plate, 5mm thick. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Dimensions: 650 x 210 x 120mm. 
Tested to over 200kg. Maximum recommended user weight: 135kg. 

 

TECHNICAL FEATURES 

Be-Line drop-down support rail, L. 650mm, anthracite 
Ref. 511960C

Height 210mm
Length 650mm
Width 120mm
Finish Powder-coated metallised anthracite aluminium
Tootekood: DE-511960C ,   Tarneaeg: 14-21 päeva
408,00 €

Be-Line drop-down support rail, L. 650mm, white 
Ref. 511960W

Be-Line drop-down support rail for people with reduced mobility. 
In the lowered position use as a grab bar, as a support for standingand for assisting movement, for WCS or showers. 
Allows side access in the raised position.
Removable: easy to remove with anti-theft locking system. Reduces the number of barsin a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility. 
Slowed down descent. Retained in upright position. 
Aluminium tube. 
Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Matte white powder-coated aluminium finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
Concealed fixings secured to wall by a 304 stainless steel plate, 5mm thick. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Dimensions: 650 x 210 x 120mm. 
Tested to over 200kg. Maximum recommended user weight: 135kg. 

 

 

TECHNICAL FEATURES 

Be-Line drop-down support rail, L. 650mm, white 
Ref. 511960W

Height 210mm
Length 650mm
Width 120mm
Finish Powder-coated matte white aluminium

 

Tootekood: DE-511960W ,   Tarneaeg: 14-21 päeva
408,00 €

Be-Line drop-down support rail, L. 850mm, anthracite 
Ref. 511964C

Be-Line drop-down support rail for people with reduced mobility. 
In the lowered position use as a grab bar, as a support for standingand for assisting movement, for WCS or showers. 
Allows side access in the raised position.
Removable: easy to remove with anti-theft locking system. Reduces the number of barsin a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility. 
Slowed down descent. Retained in upright position. 
Aluminium tube. 
Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Metallised anthracite powder-coated aluminium finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
Concealed fixings secured to wall by a 304 stainless steel plate, 5mm thick. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Dimensions: 850 x 210 x 120mm. 
Tested to over 200kg. Maximum recommended user weight: 135kg. 

 

 

TECHNICAL FEATURES 

Be-Line drop-down support rail, L. 850mm, anthracite 
Ref. 511964C

Height 210mm
Length 850mm
Width 120mm
Finish Powder-coated metallised anthracite aluminium
Tootekood: DE-511964C ,   Tarneaeg: 14-21 päeva
438,00 €

Be-Line drop-down support rail, L. 850mm, white 
Ref. 511964W

Be-Line drop-down support rail for people with reduced mobility. 
In the lowered position use as a grab bar, as a support for standingand for assisting movement, for WCS or showers. 
Allows side access in the raised position.
Removable: easy to remove with anti-theft locking system. Reduces the number of barsin a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility. 
Slowed down descent. Retained in upright position. 
Aluminium tube. 
Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Matte white powder-coated aluminium finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
Concealed fixings secured to wall by a 304 stainless steel plate, 5mm thick. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Dimensions: 850 x 210 x 120mm. 
Tested to over 200kg. Maximum recommended user weight: 135kg

 

TECHNICAL FEATURES 

Be-Line drop-down support rail, L. 850mm, white 
Ref. 511964W

Height 210mm
Length 850mm
Width 120mm
Finish Powder-coated matte white aluminium
Tootekood: DE-511964W ,   Tarneaeg: 14-21 päeva
438,00 €

Be-Line drop-down support rail with leg, L. 650mm, anthracite 
Ref. 511962C

Be-Line drop-down support rail for people with reduced mobility. 
In the lowered position use as a grab bar, as a support for standingand for assisting movement, for WCS or showers. 
Allows side access in the raised position.
Removable: easy to remove with anti-theft locking system. Reduces the number of barsin a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility. 
Retained in upright position. Slowed down descent. 
Aluminium tube. 
Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Metallised anthracite powder-coated aluminium finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
Concealed fixings secured to wall by a 304 stainless steel plate, 5mm thick. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Leg provides additional reinforcement when wall fixings are not enough.
Dimensions: 650 x 825 x 120mm. 
Leg height can be adjusted from 760 - 780mm.
Tested to over 200kg. Maximum recommended user weight: 135kg. 

 

 

TECHNICAL FEATURES 

Be-Line drop-down support rail with leg, L. 650mm, anthracite 
Ref. 511962C

Height 210mm
Length 650mm
Width 120mm
Finish Powder-coated metallised anthracite aluminium

 

Tootekood: DE-511962C ,   Tarneaeg: 14-21 päeva
486,00 €

Be-Line drop-down support rail with leg, L. 650mm, white 
Ref. 511962W

Be-Line drop-down support rail for people with reduced mobility. 
In the lowered position use as a grab bar, as a support for standingand for assisting movement, for WCS or showers. 
Allows side access in the raised position.
Removable: easy to remove with anti-theft locking system. Reduces the number of barsin a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility. 
Retained in upright position. Slowed down descent. 
Aluminium tube. 
Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Matte white powder-coated aluminium finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
Concealed fixings secured to wall by a 304 stainless steel plate, 5mm thick. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Leg provides additional reinforcement when wall fixings are not enough.
Dimensions: 650 x 825 x 120mm. 
Leg height can be adjusted from 760 - 780mm.
Tested to over 200kg. Maximum recommended user weight: 135kg. 

 

 

TECHNICAL FEATURES 

Be-Line drop-down support rail with leg, L. 650mm, white 
Ref. 511962W

Height 210mm
Length 650mm
Width 120mm
Finish Powder-coated matte white aluminium
Tootekood: DE-511962W ,   Tarneaeg: 14-21 päeva
486,00 €

Be-Line drop-down support rail with leg, L. 850mm, anthracite 
Ref. 511963C

Be-Line drop-down support rail for people with reduced mobility. 
In the lowered position use as a grab bar, as a support for standingand for assisting movement, for WCs or showers. 
Allows side access in the raised position.
Removable: easy to remove with anti-theft locking system. Reduces the number of barsin a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility. 
Retained in upright position. Slowed down descent. 
Aluminium tube. 
Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Metallised anthracite powder-coated aluminium finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
Concealed fixings secured to wall by a 304 stainless steel plate, 5mm thick. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Leg provides additional reinforcement when wall fixings are not enough.
Dimensions: 850 x 825 x 120mm. 
Leg height can be adjusted from 760 - 780mm.
Tested to over 200kg. Maximum recommended user weight: 135kg. 

 

TECHNICAL FEATURES 

Be-Line drop-down support rail with leg, L. 850mm, anthracite 
Ref. 511963C

Height 210mm
Length 850mm
Width 120mm
Finish Powder-coated metallised anthracite aluminium
Tootekood: DE-511963C ,   Tarneaeg: 14-21 päeva
510,00 €

Be-Line drop-down support rail with leg, L. 850mm, white 
Ref. 511963W

Be-Line drop-down support rail for people with reduced mobility. 
In the lowered position use as a grab bar, as a support for standingand for assisting movement, for WCs or showers. 
Allows side access in the raised position.
Removable: easy to remove with anti-theft locking system. Reduces the number of barsin a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility. 
Retained in upright position. Slowed down descent. 
Aluminium tube. 
Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Matte white powder-coated aluminium finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
Concealed fixings secured to wall by a 304 stainless steel plate, 5mm thick. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Leg provides additional reinforcement when wall fixings are not enough.
Dimensions: 850 x 825 x 120mm. 
Leg height can be adjusted from 760 - 780mm.
Tested to over 200kg. Maximum recommended user weight: 135kg. 

 

 

TECHNICAL FEATURES 

Be-Line drop-down support rail with leg, L. 850mm, white 
Ref. 511963W

Height 210mm
Length 850mm
Width 120mm
Finish Powder-coated matte white aluminium
Tootekood: DE-511963W ,   Tarneaeg: 14-21 päeva
510,00 €

Wall mounted MINERALCAST PMR washbasin 
Ref. 132306

Wall-mounted washbasin, 785 x 545 x 150mm.
With integral side grips, can be used to support user or as a towel rail.
Sleek and fluid lines.
MINERALCAST: a composite material consisting of natural minerals and polyester resin.
Suitable for use in public and commercial places and the healthcare sector.
Shallow washbasin ideal for people with reduced mobility.
Uniform, non-porous surface is easy to clean.
One-piece pressed washbasin, seam-free, for easy maintenance and better hygiene.
Warm to the touch.
With Ø 35mm central tap hole.
Without overflow.
Supplied with fixing elements.
White, RAL 9016.
Weight: 21.5 kg.

Tootekood: DE-132306 ,   Tarneaeg: 14-21 päeva
948,00 €

Dushikomplekt RAVI liftiga ANTIBACTUS FM Mattson, spiraalne voolik

Dušilift invadušile

 

Shower set Antibactus

 
Description
Chrome
Article number
34450140

 

PROPERTIES

    • With drain valve
    • Anti lime-scale hand shower and black spiral hose
    • Chrome-plated shower bar
    • Suitable for shower mixer with G1/2 downward outlet
    • Water is drained out of the hose and shower when closing the valve

 

Tootekood: FMA-34450140 ,   Tarneaeg: 14-21 päeva
252,00 €

Dušiiste põrandale CARE Normbau Ascento 548x437x623 mm, tumehall

 

Care Stool, 548 x 437 x 623 mm, Dark grey 

  • Ascento as Modular Seating Solution, expandible and combinable 
  • ergonomic formed seat with rounded outer edges upper extended bow arms that serve as as grab rails with non-slip rubber buffers in colour black
  • Product : Hocker 
  • Product group : 8700 
  • Length : 548 mm 
  • Width : 437 mm 
  • Height : 623 mm 
  • Wide seat surface : 412 mm 
  • Depth of the seat surface : 419 mm 
  • Material : Polypropylen, Gestell aus Edelstahl, Werkstoff Nr. 1.4301 (A2, AISI 304) 
  • Surface : matt 
  • Colour : lieferbar in Dunkelgrau (018) und Weiß (019) 
  • Loading : max. 150 kg
Tootekood: NB-8750030.018 ,   Tarneaeg: 14-21 päeva
396,00 €

Dušiiste põrandale CARE Normbau Ascento 548x437x623 mm, valge

 

Care Stool, 548 x 437 x 623 mm, White 

    • Product : Hocker 
    • Product group : 8700 
    • Length : 548 mm 
    • Width : 437 mm 
    • Height : 623 mm 
    • Wide seat surface : 412 mm 
    • Depth of the seat surface : 419 mm 
    • Material : Polypropylen, Gestell aus Edelstahl, Werkstoff Nr. 1.4301 (A2, AISI 304) 
    • Surface : matt 
    • Colour : lieferbar in Dunkelgrau (018) und Weiß (019) 
    • Loading : max. 150 kg
     
Tootekood: NB-8750030.019 ,   Tarneaeg: 14-21 päeva
396,00 €

Dušitugi L-kujuline 800x800x70 matt must

Horisontaalne nurga käetugi, 3-punkti kinnitus. Toru d 32 mm. 

 

• 90º wall to wall horizontal grab bar for showers, baths and changing rooms, with three anchoring points and with snap flange covers, made with stainless steel tube, folded in an "L" shape at 90º.

• Designed to achieve barrier-free accessibility in bathrooms and public spaces. This grab bar is suitable for specific spaces for the elderly or people with reduced mobility. Model suitable for collectivities.

• Stainless steel gives this bar great durability and great resistance to rust.

• The bar has three snap flange covers that conceal the anchoring screws to the wall and reinforce, even more, the beauty of the product once installed.

• Optionally, these bars can be electrically isolated by installing the Electrical Isolation Kit code KA0020.

• Supplied with all the necessary hardware to fix the bar to a brick wall.

General description

Mediepoxi / Medinox series

BD0700C BD0700CS Bright finish Satin finish

         
  • 90o wall to wall horizontal grab bar for showers, baths and changing rooms, with three anchoring points and with snap flange covers, made with stainless steel tube, folded in an "L" shape at 90o.

  • Designed to achieve barrier-free accessibility in bathrooms and public spaces. This grab bar is suitable for specific spaces for the elderly or people with reduced mobility. Model suitable for collectivities.

  • Stainless steel gives this bar great durability and great resistance to rust.

  • The bar has three snap flange covers that conceal the anchoring screws to the wall and reinforce, even more, the beauty of the product once

    installed.

  • Optionally, these bars can be electrically isolated by installing the Electrical Isolation Kit code KA0020.

  • Supplied with all the necessary hardware to fix the bar to a brick wall.

    Components and materials

  • BD2700: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 201 stainless steel tube white finish.

  • BD2700B: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 201 stainless steel tube matte black finish.

  • BD0700C: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 304 stainless steel tube bright finish.

  • BD0700CS: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 304 stainless steel tube satin finish.

  • TUBING: made of stainless steel 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the

    diameter along the bends.

  • CONCEALED WALL BRACKET: three units made of stainless steel sheet, 3 mm thick and joined to the bar by welding to the ends of the

    tube. It has three holes (BD2700 and BD2700B) or two holes (other references), with a diameter of 6.5 mm that allow the fixing of the bar

    to the wall.

  • SNAP FLANGE COVER: three units that conceal the installation screws made of 1.5 mm thick polypropylene (BD2700 and BD2700B) or

0.8 mm thick stainless steel (other references).

 

 

 

Tootekood: MBD2700B ,   Tarneaeg: 14-21 päeva
108,00 €

Dušitugi L-kujuline 800x800x70 RST harjatud matt

Horisontaalne nurga käetugi, 3-punkti kinnitus. Toru d 32 mm. 

 

• 90º wall to wall horizontal grab bar for showers, baths and changing rooms, with three anchoring points and with snap flange covers, made with stainless steel tube, folded in an "L" shape at 90º.

• Designed to achieve barrier-free accessibility in bathrooms and public spaces. This grab bar is suitable for specific spaces for the elderly or people with reduced mobility. Model suitable for collectivities.

• Stainless steel gives this bar great durability and great resistance to rust.

• The bar has three snap flange covers that conceal the anchoring screws to the wall and reinforce, even more, the beauty of the product once installed.

• Optionally, these bars can be electrically isolated by installing the Electrical Isolation Kit code KA0020.

• Supplied with all the necessary hardware to fix the bar to a brick wall.

General description

Mediepoxi / Medinox series

BD0700C BD0700CS Bright finish Satin finish

         
  • 90o wall to wall horizontal grab bar for showers, baths and changing rooms, with three anchoring points and with snap flange covers, made with stainless steel tube, folded in an "L" shape at 90o.

  • Designed to achieve barrier-free accessibility in bathrooms and public spaces. This grab bar is suitable for specific spaces for the elderly or people with reduced mobility. Model suitable for collectivities.

  • Stainless steel gives this bar great durability and great resistance to rust.

  • The bar has three snap flange covers that conceal the anchoring screws to the wall and reinforce, even more, the beauty of the product once

    installed.

  • Optionally, these bars can be electrically isolated by installing the Electrical Isolation Kit code KA0020.

  • Supplied with all the necessary hardware to fix the bar to a brick wall.

    Components and materials

  • BD2700: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 201 stainless steel tube white finish.

  • BD2700B: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 201 stainless steel tube matte black finish.

  • BD0700C: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 304 stainless steel tube bright finish.

  • BD0700CS: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 304 stainless steel tube satin finish.

  • TUBING: made of stainless steel 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the

    diameter along the bends.

  • CONCEALED WALL BRACKET: three units made of stainless steel sheet, 3 mm thick and joined to the bar by welding to the ends of the

    tube. It has three holes (BD2700 and BD2700B) or two holes (other references), with a diameter of 6.5 mm that allow the fixing of the bar

    to the wall.

  • SNAP FLANGE COVER: three units that conceal the installation screws made of 1.5 mm thick polypropylene (BD2700 and BD2700B) or

0.8 mm thick stainless steel (other references).

 

 

 

Tootekood: MBD0700CS ,   Tarneaeg: 14-21 päeva
165,00 €