Valamu jalaga 700x700, kõrgus 850mm , R/V teras

2-ne Valamu jalaga 1200x700, kõrgus 850mm , R/V teras

Нержавеющая большегрузная двойная мойка на ножках, 1200 x 700 x 850 мм

Характеристики

stainless steel bulk double-sink with a sheating
without a tap hole (could be made to order)
possibility of fine plane regulation by the regulation screws on the supporting legs
possibility to order inner sinks in dimensions: 400 x 300 x 200 mm/ 400 x 400 x 250 mm/ 400 x 400 x 200 mm
available also in the length 1400 mm
material CrNi 18/10 (AISI-304)
brushed finish
different dimensions could be made to order

Арт. №	93160
Название	SLUN 16

Tootekood: SA-SLUN16 , Tarneaeg: 3-5 nädalad

2745,00 €

Automatne kummikute pesur harjaga, 220V, 50Hz

automatic washing system for soles with rotary brushes - 230V, 50Hz

RMP 02 is a stainless steel sensor-controlled washing system with rotary brushes for wellingtons. A built-in photocell sensor reacts to the user holding the handrail. The electromagnetic valve switches on, opens the water inlet, the brushes start to rotate and the circular jet injection of the disinfecting lotion is carried out. After placing the foot with the wellington on the grid in between the rotary brushes, the sole is cleaned by means of the horizontal brush. There is a CENTRAL/STOP button on the handrail for emergency switch-off.
The washing system is intended for free standing installation on the floor. Imperfections in the floor are balanced out by four adjustable hobs. The construction of the system allows the outlet to be placed above floor level. Large pieces of dirt are collected by a sieve, which can be easily cleaned. The sieve and brush can be taken out without using a tool.
The RMP 02 washing system, with its easy maintenance, is mainly intended for operations where quick removal of mechanical dirt from wellingtons is required.
The canister with disinfecting solution is not part of the delivery.

Package contents

body of the washing machine
removable grid
electronics with photocell
rotary brush
hand brush
jerican holder
priming hose
adjustable supporting legs
central stop button

Radius of sensor	0,5 m
Water inlet	G 1/2“
Water pressure	0,1 – 1,0 MPa
Outlet	G 6/4”
Electricity protection	IP 55
Power supply	230 V, 50 Hz
Power requirement	370 W
Water temperature	max. 42°C
Weight	41 kg

Set up water inlet as per picture
Set up outlet G 6/4” via effluvial cover
Set up cable for power supply – 230 V, 50 Hz

Tootekood: AZP-RMP 02 , Tarneaeg: 3-5 nädalat

10323,00 €

Külmumiskindel AUTOMAATJOOTJA Hobustele ja Lehmadele D60CM

DRINKING SYSTEM

Frost-free drinking system for cattle and horses
Fresh and clean water for the animals all year round
Without wiring or electricity
A minimum of maintenance
No concern about filling the drinking vessels
No concern about cleaning the drinking vessels

Automaatjootjad sobivad kasutamiseks nii karjamaal kui ka tallides ning nende läheduses asuvates joogikohtades.

Jootjaid on lihtne kasutada ning hobused saavad kiiresti aru, et mugavam on vee juurdevoolu avamiseks vajutada klapile

mitte nina otsaga vaid selle ülaosaga. Kui koon (mokad) on joomiseks vabad, joobki hobune loomulikul viisil vee pindmiselt

kihilt. Seetõttu olemegi valinud jooginõuks lai ja sügav kauss, et tekiks joomiseks mugav veepind.

Töötamise põhimõte

Tõusutoru on varustatud isetühjeneva 3-tee

ventiiliga, mis on paigaldatud kaevu, mis omakorda

on süvistatud pinnasesse.

Kui jootjat ei kasutata on veest tühi nii ventiil kui

ka tõustoru, milles olev vesi võiks muidu külmuda.

Nii jootja ventiil ja tõusutoru on külmumiskindlad nii

kaua kuni on külmumiskindel ka vee toitetorustik.

Tootekood: FL-A362 , Tarneaeg: 14-21 päeva

1037,61 € (10%)
1152,90 €

Intra GUB1 R/V teras valamu, pritsmisplekiga 455x340x412mm

Valamu R/V terasest

Garaazi/koristusruumi jaoks

Tootekood: I-GUB1 , Tarneaeg: 14 -21 päeva

299,00 €

Joogifontään põranda/sein mehaaniline R/V teras AISI304

AFO 01.S

stainless steel drinking fountain with pressure valve designed to stand and to be attached to wall

AFO 01.S is a drinking fountain of stainless steel with pressure valve designed to stand and to be attached to wall. Water runs for the time for which the valve is pressed plus the pre-set period after it is released; thus the jet can be rinsed.
Water supply is provided by a flexible hose, trap comprises an elastic flexible couple. Flexible design of water supply and outflow allows variable and easy connection of the drinking fountain as well as its dismounting.

Automatic drinking fountain (with a sensor) can be supplied per order.

AFO 01.S is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order. For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).

Package contents

Stainless housing with cone
Pressure valve with jet
Flexible hose outflow
Fixing and connecting material

dimensions	330 x 900 x 365 mm
outlet	d = 40 mm
water inlet	G 1/2"
water pressure	0,2 – 0,6 MPa, recommended 0,3 MPa
weight	12 kg

Set up water outlet d = 40 mm
Set up water inlet G 1/2"

Tootekood: AZP-AFO01.S , Tarneaeg: 3-4 nädalad

1226,00 €