Kaubamärk
Tootegrupid

Kätekuivatid keskmine koormus

Kätekuivatid keskmine koormus

Restoranid, Cafe, kontorid...

Järjesta:
Kuva: Nimekirjana / Võrgustikuna

 

 

Material: satin steel AISI 316

Hand dryer.

Outstanding classic danish design by Knud Holscher.

Material: stainles steel AISI 316 satin finish, wall mounted,

220V.

W:448 mm x H:300 mm x D:220 mm.

Tootekood: I14708202000 ,   Tarneaeg: 14-21 päev
1801,28 € (5%)
1896,08 €

HOT AIR HAND DRYER WP 1200

298 x 396 x 150 mm

  • Hot air hand dryer in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
    Further available surfaces: see below.
  • Touch-free, low-failure capacitive sensor technology, sensor distance 0–30 cm, power cut-off after 30 s drying time.
  • Low noise.
  • SEV-tested and certified.
  • Supply voltage 230 V, 50 Hz
    Power rating 2000 Watt
    Heater power 1915 Watt
    Motor power 85 Watt
    Air output 258 m³/h
  • Blower unit can be replaced as module.
  • Installation dimensions: 300 x 398 x 65 mm
  • Mounting: With four screws in wall opening through fixing holes in the side walls.
  • Delivery includes fixing material and device plug.
  • Weight (in kg): 7,2
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 733020
highly polished 731020
(coloured) plastic powder - coating 728020
Suggested text for specifications:

Hot air hand dryer in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. Low noise blower unit with capacitive sensor technology, sensor distance 0-30 cm, drying time 30 s factory setting, can be replaced as module. Power rating 2000 W. SEV-tested and certified. Delivery includes fixing material and device plug, mains cable supply on site 230 V/50 Hz. 

Dimensions: 298 x 396 x 150 mm

Article No. WP1200
Tootekood: WAG-WP1200 ,   Tarneaeg: 14-21 päeva
979,36 € (5%)
1030,90 €

Kätekuivati elektriline uputav Wagner Ewar 2000W R/V teras poleeritud

HOT AIR HAND DRYER WP 1200

298 x 396 x 150 mm

  • Hot air hand dryer in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
    Further available surfaces: see below.
  • Touch-free, low-failure capacitive sensor technology, sensor distance 0–30 cm, power cut-off after 30 s drying time.
  • Low noise.
  • SEV-tested and certified.
  • Supply voltage 230 V, 50 Hz
    Power rating 2000 Watt
    Heater power 1915 Watt
    Motor power 85 Watt
    Air output 258 m³/h
  • Blower unit can be replaced as module.
  • Installation dimensions: 300 x 398 x 65 mm
  • Mounting: With four screws in wall opening through fixing holes in the side walls.
  • Delivery includes fixing material and device plug.
  • Weight (in kg): 7,2
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 733020
highly polished 731020
(coloured) plastic powder - coating 728020
Suggested text for specifications:

Hot air hand dryer in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. Low noise blower unit with capacitive sensor technology, sensor distance 0-30 cm, drying time 30 s factory setting, can be replaced as module. Power rating 2000 W. SEV-tested and certified. Delivery includes fixing material and device plug, mains cable supply on site 230 V/50 Hz. 

Dimensions: 298 x 396 x 150 mm

Article No. WP1200
Tootekood: WAG-WP1200P ,   Tarneaeg: 14-21 päeva
1072,08 € (5%)
1128,50 €

HOT AIR HAND DRYER WP 1100

298 x 396 x 150 mm

  • Hot air hand dryer in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
    Further available surfaces: see below.
  • Touch-free, low-failure capacitive sensor technology, sensor distance 0–30 cm, power cut-off after 30 s drying time.
  • Low noise.
  • SEV-tested and certified.
  • Supply voltage 230 V, 50 Hz
    Power rating 2000 Watt
    Heater power 1915 Watt
    Motor power 85 Watt
    Air output 258 m³/h
  • Blower unit can be replaced as module.
  • Mounting: With four screws through key holes and one optional anti-theft hole in the back wall. 
  • Delivery includes fixing material and device plug.
  • Weight (in kg): 7,2
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 733010
highly polished 731010
(coloured) plastic powder - coating 729010
Suggested text for specifications:

Hot air hand dryer in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. Low noise blower unit with capacitive sensor technology, sensor distance 0-30 cm, drying time 30 s factory setting, can be replaced as module. Power rating 2000 W. SEV-tested and certified. Delivery includes fixing material and device plug, mains cable supply on site 230 V/50 Hz. 

Dimensions: 298 x 396 x 150 mm

Article No. WP1100
Tootekood: WAG-WP1100 ,   Tarneaeg: 14-21 päeva
927,20 € (5%)
976,00 €

HOT AIR HAND DRYER WP 1100

298 x 396 x 150 mm

  • Hot air hand dryer in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
    Further available surfaces: see below.
  • Touch-free, low-failure capacitive sensor technology, sensor distance 0–30 cm, power cut-off after 30 s drying time.
  • Low noise.
  • SEV-tested and certified.
  • Supply voltage 230 V, 50 Hz
    Power rating 2000 Watt
    Heater power 1915 Watt
    Motor power 85 Watt
    Air output 258 m³/h
  • Blower unit can be replaced as module.
  • Mounting: With four screws through key holes and one optional anti-theft hole in the back wall. 
  • Delivery includes fixing material and device plug.
  • Weight (in kg): 7,2
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 733010
highly polished 731010
(coloured) plastic powder - coating 729010
Suggested text for specifications:

Hot air hand dryer in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. Low noise blower unit with capacitive sensor technology, sensor distance 0-30 cm, drying time 30 s factory setting, can be replaced as module. Power rating 2000 W. SEV-tested and certified. Delivery includes fixing material and device plug, mains cable supply on site 230 V/50 Hz. 

Dimensions: 298 x 396 x 150 mm

Article No. WP1100
Tootekood: WAG-WP1100P ,   Tarneaeg: 14-21 päeva
1037,31 € (5%)
1091,90 €

HOT AIR HAND DRYER WP 1100

298 x 396 x 150 mm

  • Hot air hand dryer in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
    Further available surfaces: see below.
  • Touch-free, low-failure capacitive sensor technology, sensor distance 0–30 cm, power cut-off after 30 s drying time.
  • Low noise.
  • SEV-tested and certified.
  • Supply voltage 230 V, 50 Hz
    Power rating 2000 Watt
    Heater power 1915 Watt
    Motor power 85 Watt
    Air output 258 m³/h
  • Blower unit can be replaced as module.
  • Mounting: With four screws through key holes and one optional anti-theft hole in the back wall. 
  • Delivery includes fixing material and device plug.
  • Weight (in kg): 7,2
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 733010
highly polished 731010
(coloured) plastic powder - coating 729010
Suggested text for specifications:

Hot air hand dryer in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. Low noise blower unit with capacitive sensor technology, sensor distance 0-30 cm, drying time 30 s factory setting, can be replaced as module. Power rating 2000 W. SEV-tested and certified. Delivery includes fixing material and device plug, mains cable supply on site 230 V/50 Hz. 

Dimensions: 298 x 396 x 150 mm

Article No. WP1100
Tootekood: WAG-WP1100RAL ,   Tarneaeg: 14-21 päeva
1060,49 € (5%)
1116,30 €

HOT AIR HAND DRYER WP 1100

298 x 396 x 150 mm

  • Hot air hand dryer in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
    Further available surfaces: see below.
  • Touch-free, low-failure capacitive sensor technology, sensor distance 0–30 cm, power cut-off after 30 s drying time.
  • Low noise.
  • SEV-tested and certified.
  • Supply voltage 230 V, 50 Hz
    Power rating 2000 Watt
    Heater power 1915 Watt
    Motor power 85 Watt
    Air output 258 m³/h
  • Blower unit can be replaced as module.
  • Mounting: With four screws through key holes and one optional anti-theft hole in the back wall. 
  • Delivery includes fixing material and device plug.
  • Weight (in kg): 7,2
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 733010
highly polished 731010
(coloured) plastic powder - coating 729010
Suggested text for specifications:

Hot air hand dryer in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. Low noise blower unit with capacitive sensor technology, sensor distance 0-30 cm, drying time 30 s factory setting, can be replaced as module. Power rating 2000 W. SEV-tested and certified. Delivery includes fixing material and device plug, mains cable supply on site 230 V/50 Hz. 

Dimensions: 298 x 396 x 150 mm

Article No. WP1100
Tootekood: WAG-WP1100V ,   Tarneaeg: 14-21 päeva
1060,49 € (5%)
1116,30 €

180x 152x260 mm

  • Référence: 51410
  • Capot en inox brossé AISI 304 (18/10)
  • Déclenchement automatique
  • Niveau sonore : 72 dB
  • Tension alimentation : 220/240V
  • Fréquence : 50/60 Hz
  • Vitesse de sortie d'air : 216 km/h
  • Température de l'air 20/40°C
  • Résistance chauffante : activable / désactivable
  • Protection électrique CL1 - IPX1
  • CE et ROSH
  • Antivandalisme : coque ultra résistante
  • Faible encombrement
  • Séchage ultra rapide : 10 secondes
Tootekood: RO-51410 ,   Tarneaeg: 14-21 päeva
382,47 € (5%)
402,60 €

180x 152x260 mm

  • Référence: 51411
  • Capot en inox brossé AISI 304 (18/10)
  • Déclenchement automatique
  • Niveau sonore : 72 dB
  • Tension alimentation : 220/240V
  • Fréquence : 50/60 Hz
  • Vitesse de sortie d'air : 216 km/h
  • Température de l'air 20/40°C
  • Résistance chauffante : activable / désactivable
  • Protection électrique CL1 - IPX1
  • CE et ROSH
  • Antivandalisme : coque ultra résistante
  • Faible encombrement
  • Séchage ultra rapide : 10 secondes
Tootekood: RO-51411 ,   Tarneaeg: 14-21 päeva
382,47 € (5%)
402,60 €

180x 152x260 mm

  • Référence: 51410
  • Capot en inox brossé AISI 304 (18/10)
  • Déclenchement automatique
  • Niveau sonore : 72 dB
  • Tension alimentation : 220/240V
  • Fréquence : 50/60 Hz
  • Vitesse de sortie d'air : 216 km/h
  • Température de l'air 20/40°C
  • Résistance chauffante : activable / désactivable
  • Protection électrique CL1 - IPX1
  • CE et ROSH
  • Antivandalisme : coque ultra résistante
  • Faible encombrement
  • Séchage ultra rapide : 10 secondes
Tootekood: RO-51424 ,   Tarneaeg: 14-21 päeva
382,47 € (5%)
402,60 €

180x 152x260 mm

  • Référence: 51412
  • Capot en inox brossé AISI 304 (18/10)
  • Déclenchement automatique
  • Niveau sonore : 72 dB
  • Tension alimentation : 220/240V
  • Fréquence : 50/60 Hz
  • Vitesse de sortie d'air : 216 km/h
  • Température de l'air 20/40°C
  • Résistance chauffante : activable / désactivable
  • Protection électrique CL1 - IPX1
  • CE et ROSH
  • Antivandalisme : coque ultra résistante
  • Faible encombrement
  • Séchage ultra rapide : 10 secondes
Tootekood: RO-51412 ,   Tarneaeg: 14-21 päeva
382,47 € (5%)
402,60 €

Kätekuivati Sanela JET kontaktivaba hall ABS

SLO 01S

 

Automatic wall mounted hand dryer, grey cover

 

Characteristics

  • jet automatic hand dryers
  • air is flowing as long as hands are in the active range
  • adjustable drying time 3 - 33 s, standard 20 s
  • water drains to the tank placed in the bottom part of the dryer, no floor pollution by water under the dryer
Order number 79012 
Code SLO 01S 
 

Supply specification

SLO 01S - Supply No. 79012 - automatic hand dryer, gray plastic cover

Technical information

Dimension: 650 x 300 x 230 mm
Operating voltage: 230 V/50 Hz
Air flow: 300 km/h
Protection: class II, IP 31
Weight: 9,5 kg
Noise level: < 90 dB
Tootekood: SA-SLO01S ,   Tarneaeg: 14-21 päeva
1672,00 € (5%)
1760,00 €

Kätekuivati Sanela JET kontaktivaba valge ABS

SLO 01L

 

Automatic wall mounted hand dryer, white cover

 

Characteristics

  • jet automatic hand dryers
  • air is flowing as long as hands are in the active range
  • adjustable drying time 3 - 33 s, standard 20 s
  • water drains to the tank placed in the bottom part of the dryer, no floor pollution by water under the dryer
Order number 79011 
Code SLO 01L 
 

Supply specification

SLO 01L - Supply No. 79011 - automatic hand dryer, white plastic cover

Technical information

Dimension: 650 x 300 x 230 mm
Operating voltage: 230 V/50 Hz
Air flow: 300 km/h
Protection: class II, IP 31
Weight: 9,5 kg
Noise level: < 90 dB
Tootekood: SA-SLO01L ,   Tarneaeg: 14-21 päeva
1512,40 € (5%)
1592,00 €

NEW PRODUCT. AVAILABLE FROM DECEMBER 2020.

With the LOKI line our vision has been to create a series of elegant and functional products, which complement the surrounding architecture.

The LOKI hand dryer is a high-speed machine in sleek design. It is characterised by clean lines and a robust front plate with a high narrow light guide. The visually clean-cut, slightly overhanging front panel makes the device look like it is floating, which further enhances the elegance of the design.

The LOKI hand dryer has been selected as "German Design Winner 2021" in the category Excellent Product Design - Bath and Wellness. In addition, it adheres to ADA requirements and is thus easily accessed by anyone, including wheelchair users and children.

Like the other products in the LOKI line, the hand dryer is available in stainless steel, brushed (as shown) or powder coated in white, black and all RAL Classic colours.

PRODUCT DESCRIPTION

DESIGN, FUNCTIONALITY AND QUALITY GO HAND IN HAND

DAN DRYER is a leading manufacturer and supplier of equipment for washrooms and our products with the familar viking logo can be found in commercial washrooms across the world.

The LOKI line continues the tradition of high-quality design established in DAN DRYER in recent years. Its elegant and functional design is characterised by straight lines and rectangular shapes, which complement surrounding architectural elements such as doors, windows, and tiles.
 

BENEFITS - LOKI HAND DRYER IN STAINLESS STEEL

 

• Winner of German Design Award 2021 

• Drying cycle of 10-15 seconds

• LED light indicates when the machine is in use 

• Adjustable sensor range and motor speed

• Also available in powder coated stainless steel, matt black, white and custom RAL colours

 

SPECIFICATIONS 
Product number: 4004 / EAN no. 5-709818-040042
Technical data: Touch free hand dryer in powder coated stainless steel. Infra-red sensor and electronic timer, drying cycle: 10-15 sec. IP24, 230 V, 50/60 Hz, 840-1000 W, Class I (earthed), 69-76.6 dB @ 1 m dBA
Dimensions H: 330, W: 173, D: 102 mm
Weight: 5 kg
Colour: Black RAL 9005 Gloss 10
Tootekood: DAN4004 ,   Tarneaeg: Alates Detsember 2020 2-3 nädala
672,22 € (5%)
707,60 €

NEW PRODUCT. AVAILABLE FROM DECEMBER 2020.

With the LOKI line our vision has been to create a series of elegant and functional products, which complement the surrounding architecture.

The LOKI hand dryer is a high-speed machine in sleek design. It is characterised by clean lines and a robust front plate with a high narrow light guide. The visually clean-cut, slightly overhanging front panel makes the device look like it is floating, which further enhances the elegance of the design.

The LOKI hand dryer has been selected as "German Design Winner 2021" in the category Excellent Product Design - Bath and Wellness. In addition, it adheres to ADA requirements and is thus easily accessed by anyone, including wheelchair users and children.

Like the other products in the LOKI line, the hand dryer is available in stainless steel, brushed (as shown) or powder coated in white, black and all RAL Classic colours.

PRODUCT DESCRIPTION

DESIGN, FUNCTIONALITY AND QUALITY GO HAND IN HAND

DAN DRYER is a leading manufacturer and supplier of equipment for washrooms and our products with the familar viking logo can be found in commercial washrooms across the world.

The LOKI line continues the tradition of high-quality design established in DAN DRYER in recent years. Its elegant and functional design is characterised by straight lines and rectangular shapes, which complement surrounding architectural elements such as doors, windows, and tiles.
 

BENEFITS - LOKI HAND DRYER IN STAINLESS STEEL

 

• Winner of German Design Award 2021 

• Drying cycle of 10-15 seconds

• LED light indicates when the machine is in use 

• Adjustable sensor range and motor speed

• Also available in powder coated stainless steel, matt black, white and custom RAL colours

 

SPECIFICATIONS 
Product number: 4006 / EAN nr. 5-709818-040066
Technical data: Touch free hand dryer in powder coated stainless steel. Infra-red sensor and electronic timer, drying cycle: 10-15 sec. IP24, 230 V, 50/60 Hz, 840-1000 W, Class I (earthed), 69-76.6 dB @ 1 m dBA
Dimensions H: 300 mm, W: 173 mm, D: 102 mm
Weight: 5 kg
Colour: Optional RAL Classic colours
Tootekood: DAN4006 ,   Tarneaeg: Alates Detsember 2020 2-3 nädala
799,71 € (5%)
841,80 €

NEW PRODUCT. AVAILABLE FROM DECEMBER 2020.

With the LOKI line our vision has been to create a series of elegant and functional products, which complement the surrounding architecture.

The LOKI hand dryer is a high-speed machine in sleek design. It is characterised by clean lines and a robust front plate with a high narrow light guide. The visually clean-cut, slightly overhanging front panel makes the device look like it is floating, which further enhances the elegance of the design.

The LOKI hand dryer has been selected as "German Design Winner 2021" in the category Excellent Product Design - Bath and Wellness. In addition, it adheres to ADA requirements and is thus easily accessed by anyone, including wheelchair users and children.

Like the other products in the LOKI line, the hand dryer is available in stainless steel, brushed (as shown) or powder coated in white, black and all RAL Classic colours.

PRODUCT DESCRIPTION

DESIGN, FUNCTIONALITY AND QUALITY GO HAND IN HAND

DAN DRYER is a leading manufacturer and supplier of equipment for washrooms and our products with the familar viking logo can be found in commercial washrooms across the world.

The LOKI line continues the tradition of high-quality design established in DAN DRYER in recent years. Its elegant and functional design is characterised by straight lines and rectangular shapes, which complement surrounding architectural elements such as doors, windows, and tiles.
 

BENEFITS - LOKI HAND DRYER IN STAINLESS STEEL

 

• Winner of German Design Award 2021 

• Drying cycle of 10-15 seconds

• LED light indicates when the machine is in use 

• Adjustable sensor range and motor speed

• Also available in powder coated stainless steel, matt black, white and custom RAL colours

 

 

SPECIFICATIONS 
Product number: 4000 / EAN no. 5-709818-040004
Technical data: Touch free hand dryer in brushed stainless steel. Infra-red sensor and electronic timer, drying cycle: 10-15 sec. IP24, 230 V, 50/60 Hz, 840-1000 W, Class I (earthed), 69-76.6 dB @ 1 m dBA
Dimensions H: 300 mm, W: 173 mm, D: 102 mm
Weight: 5 kg
Colour: Stainless steel, brushed
 
Tootekood: DAN4000 ,   Tarneaeg: Alates Detsember 2020 2-3 nädala
672,22 € (5%)
707,60 €

NEW PRODUCT. AVAILABLE FROM DECEMBER 2020.

With the LOKI line our vision has been to create a series of elegant and functional products, which complement the surrounding architecture.

The LOKI hand dryer is a high-speed machine in sleek design. It is characterised by clean lines and a robust front plate with a high narrow light guide. The visually clean-cut, slightly overhanging front panel makes the device look like it is floating, which further enhances the elegance of the design.

The LOKI hand dryer has been selected as "German Design Winner 2021" in the category Excellent Product Design - Bath and Wellness. In addition, it adheres to ADA requirements and is thus easily accessed by anyone, including wheelchair users and children.

Like the other products in the LOKI line, the hand dryer is available in stainless steel, brushed (as shown) or powder coated in white, black and all RAL Classic colours.

PRODUCT DESCRIPTION

DESIGN, FUNCTIONALITY AND QUALITY GO HAND IN HAND

DAN DRYER is a leading manufacturer and supplier of equipment for washrooms and our products with the familar viking logo can be found in commercial washrooms across the world.

The LOKI line continues the tradition of high-quality design established in DAN DRYER in recent years. Its elegant and functional design is characterised by straight lines and rectangular shapes, which complement surrounding architectural elements such as doors, windows, and tiles.
 

BENEFITS - LOKI HAND DRYER IN STAINLESS STEEL

 

• Winner of German Design Award 2021 

• Drying cycle of 10-15 seconds

• LED light indicates when the machine is in use 

• Adjustable sensor range and motor speed

• Also available in powder coated stainless steel, matt black, white and custom RAL colours

 

SPECIFICATIONS 
Product number: 4002 / EAN nr. 5-709818-040028
Technical data: Touch free hand dryer in powder coated stainless steel. Infra-red sensor and electronic timer, drying cycle: 10-15 sec. IP24, 230 V, 50/60 Hz, 840-1000 W, Class I (earthed), 69-76.6 dB @ 1 m dBA
Dimensions H: 300 mm, W: 173 mm, D: 102 mm
Weight: 5 kg
Colour: White RAL 9003, gloss 60

 

 
Tootekood: DAN4002 ,   Tarneaeg: Alates Detsember 2020 2-3 nädala
672,22 € (5%)
707,60 €

Moeks disain,keskmise hinnaklass,suurepärane tasakaal ja valikus.

-Optimaalne jõudluse ja energiakulu suhe

-Sensoriga toimiv

-Hooldusvaba

-Ülikaine (ainult 57dB) ja ergonoomiline

-Reguleeritav tuvastuskaugus (5-25cm)

-Ideaalne tulemuse ja hinna tasakaal

Kuivatuseaeg on 30-40 sek

 

Tootekood: MM99ACS ,   Tarneaeg: 7-14 päeva
311,55 € (7%)
335,00 €

Moeks disain,keskmise hinnaklass,suurepärane tasakaal ja valikus.

-Optimaalne jõudluse ja energiakulu suhe

-Sensoriga toimiv

-Hooldusvaba

-Ülikaine (ainult 57dB) ja ergonoomiline

-Reguleeritav tuvastuskaugus (5-25cm)

-Ideaalne tulemuse ja hinna tasakaal

Kuivatuseaeg on 30-40 sek

 

Tootekood: MM99AC ,   Tarneaeg: 7-14 päeva
311,55 € (7%)
335,00 €

Moeks disain,keskmise hinnaklass,suurepärane tasakaal ja valikus.

-Optimaalne jõudluse ja energiakulu suhe

-Sensoriga toimiv

-Hooldusvaba

-Ülikaine (ainult 57dB) ja ergonoomiline

-Reguleeritav tuvastuskaugus (5-25cm)

-Ideaalne tulemuse ja hinna tasakaal

Kuivatuseaeg on 30-40 sek

 

Tootekood: MM99A ,   Tarneaeg: 7-14 päeva
212,97 € (7%)
229,00 €