UUDIS! Invatooted WC ja vannituppa
Invakäepidemed ja -segistid on mõeldud inimestele, kes vajavad vannitoas ja tualettruumis liikumisel või seismisel lisatuge ja ohutust. Invakäepidemed on tavaliselt valmistatud tugevast metallist, millel on korrosioonikindlad viimistlused nagu kroom või roostevaba teras. Need paigaldatakse seina külge sobivale kõrgusele ja kohale, et tagada kasutajale turvaline tugi.
Invasegistid võimaldavad mugavat kasutamist ka inimestele, kellel on liikumispuue. Neid on võimalik paigaldada nii valamule kui ka dušiseinale. Invasegistid on valmistatud vastupidavatest materjalidest ja neil on tavaliselt mugav käepide, mida on lihtne haarata ka inimestel, kellel on käte liikuvuse piiratus.
PEGU.EE e-poest leiate erinevaid invakäepidemeid ja -segisteid erinevatele vajadustele vastavalt, sealhulgas ka vannituppa sobivaid invakäepidemeid ja -segisteid.
Antivandaalne WC pott INVA R/V taras
AUZ 08 INV is a stainless-steel WC in matt design for the disabled. It is a stainless-steel toilet to stand on the floor at the wall. The drain is directed backwards (the bottom drain version AUZ 02 INV). The closet is based on the standard AUZ 08, which is heightened and lengthened to fulfil the directive regarding products for disabled persons. To increase the user comfort, the seating part is provided with a seat from hardened plastic. The closet includes a removable backrest recommended by the League for the rights of the wheelchair bound.
The standing WC is suitable for places where the common closet cannot be attached to the side wall, because of a thin bearing particle, for example.
It is suitable to supplement the closet with an automatic pressure-water flushing device with delayed flushing AUZ 3 INV (suitable for the disabled) or any flushing device with a cistern.
|
Complete delivery | |
|
Termostaatsegistid
Termostaatsegisti Thermixa 300
- Artikli number 57403
- Viimistlused Kroom/must
- Standardfunktsioonid
- Keraamiline tööorgan.
- Põletuskaitsega
- Veesäästu funktsioon Eco-Klik.
- 1/2" ühendus käsiduši voolikule.
- Standardne tsentrite vahe 150 mm.
- Varustatud ilukatete ja ekstsentrikutega.
444,28 €
CLOVER GREEN 4845174
Käepide valamusegistile kroom/must
69,13 €
CLOVER GREEN 4845074
Käepide köögisegistile 60000.00 kroom/must
76,25 €
Invakäepide
Keraamiline tööorgan
Keraamiline tööorgan
Invakäepide
Keraamiline tööorgan
Be-line corner grab bar 2 walls, anthracite
Ref. 511941C
Be-Line corner grab bar Ø 35mm for WCs, showers or baths.
Use as a shower rail and to support the user in an upright position.
Helps and secures entry and movement in the shower also with getting in and out of the bath.
Helps with the transfer from a wheelchair to the toilet seat.
Dimensions: 695 x 695mm.
Aluminium tube thickness 3mm. Solid aluminium fixing points.
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip.
Metallised anthracite powder-coated aluminium provides a good visual contrast with the wall.
Uniform surface for easy maintenance and hygiene.
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance.
Concealed fixings.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Tested to over 200kg. Maximum recommended user weight: 135kg.
Technical features
Be-line corner grab bar 2 walls, anthracite
Ref. 511941C
Length | 695mm |
---|---|
Width | 695mm |
Width to the wall | 38mm |
Thickness | 3mm |
Finish | Metallised anthracite powder-coated aluminium |
Be-line corner grab bar 2 walls, white
Ref. 511941W
Be-Line corner grab bar Ø 35mm for showers.
Use as a shower rail and to support the user in an upright position.
Helps and secures entry and movement in the shower also with getting in and out of the bath.
Helps with the transfer from a wheelchair to the toilet seat.
Dimensions: 695 x 695mm.
Aluminium tube thickness 3mm. Solid aluminium fixing points.
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip.
Matte white powder-coated aluminium finish provides a good visual contrast with the wall.
Uniform surface for easy maintenance and hygiene.
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance.
Concealed fixings.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Tested to over 200kg. Maximum recommended user weight: 135kg.
Technical features
Be-line corner grab bar 2 walls, white
Ref. 511941W
Length | 695mm |
---|---|
Width | 695mm |
Width to the wall | 38mm |
Thickness | 3mm |
Finish | Matte white powder-coated aluminium |
Be-Line sliding shower head holder
Ref. 511911C
Be-Line sliding shower head holder.
Metallised anthracite.
Support for tilting shower head.
Easy-to-operate ergonomic grip to adjust the height of the shower head holder.
Slides by pressing the grip or pulling on the flexible hose.
Technical features
Be-Line sliding shower head holder
Ref. 511911C
Depth | 48mm |
---|---|
Length | 113mm |
Width | 80mm |
Finish | Metallised anthracite |
Be-Line sliding shower head holder
Ref. 511911W
Be-Line sliding shower head holder.
Matte white.
Support for tilting shower head.
Easy-to-operate ergonomic grip to adjust the height of the shower head holder.
Slides by pressing the grip or pulling on the flexible hose.
TECHNICAL FEATURES
Be-Line sliding shower head holder
Ref. 511911W
Depth | 48mm |
---|---|
Length | 113mm |
Width | 80mm |
Finish | Matte white |
Metallised anthracite shelf for grab bars for showers
Ref. 511922C
Metallised anthracite shelf for grab bars, for showers.
Installed against the all on the bar.
Anti-theft locking screw.
Ideal for shower gel or soap.
2 hooks for gloves.
TECHNICAL FEATURES
Metallised anthracite shelf for grab bars for showers
Ref. 511922C
Height | 71mm |
---|---|
Depth | 70mm |
Length | 165mm |
White shelf for grab bars for showers
Ref. 511922W
White shelf for grab bars, for showers.
Installed against the all on the bar.
Anti-theft locking screw.
Ideal for shower gel or soap.
2 hooks for gloves.
TECHNICAL FEATURES
White shelf for grab bars for showers
Ref. 511922W
Height | 71mm |
---|---|
Depth | 70mm |
Length | 165mm |
DESCRIPTION
Cover plate for Be-Line drop-down rail
Ref. 511950C
Be-Line metallised anthracite cover plate without fixings plate.
Conceals fixing screws when the drop-down support rail is removed.
Reduces the number of drop-down rails in a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility.
TECHNICAL FEATURES
Cover plate for Be-Line drop-down rail
Ref. 511950C
Height | 230mm |
---|---|
Depth | 17mm |
Width | 105mm |
Finish | Metallised anthracite |
Cover plate for Be-Line drop-down rail with fixings plate
Ref. 511950FC
Be-Line metallised anthracite cover plate with fixings plate.
Conceals fixing screws when the drop-down support rail is removed.
Reduces the number of drop-down rails in a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility.
Supplied with stainless steel screws for concrete walls.
TECHNICAL FEATURES
Cover plate for Be-Line drop-down rail with fixings plate
Ref. 511950FC
Height | 230mm |
---|---|
Depth | 17mm |
Width | 105mm |
Finish | Metallised anthracite |
Cover plate for Be-Line drop-down rail
Ref. 511950W
Be-Line matte white cover plate without fixings plate.
Conceals fixing screws when the drop-down support rail is removed.
Reduces the number of drop-down rails in a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility.
TECHNICAL FEATURES
Cover plate for Be-Line drop-down rail
Ref. 511950W
Height | 230mm |
---|---|
Depth | 17mm |
Width | 105mm |
Finish | Matte white |
Cover plate for Be-Line drop-down rail with fixings plate
Ref. 511950FW
Be-Line matte white cover plate with fixings plate.
Conceals fixing screws when the drop-down support rail is removed.
Reduces the number of drop-down rails in a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility.
Supplied with stainless steel screws for concrete walls.
TECHNICAL FEATURES
Cover plate for Be-Line drop-down rail with fixings plate
Ref. 511950FW
Height | 230mm |
---|---|
Depth | 17mm |
Width | 105mm |
Finish | Matte white |
Tilting mirror with long ergonomic lever
Ref. 510201N
Tilting mirror with long ergonomic lever which facilitates adjustment of mirror angle from a sitting position or by wheelchair users.
For combined installation: can be used from sitting or standing position.
Quick and easy to install: just clip into place.
Anti-theft lock.
Bright white HR Nylon lever
6mm thick Securit safety glass mirror.
Mirror dimensions: 500 x 600mm.
Can be tilted up to 20°.
Technical features
Tilting mirror with long ergonomic lever
Ref. 510201N
Height | 500mm |
---|---|
Depth | 230mm |
Width | 630mm |
Width to the wall | 70mm |
Thickness | 6mm |
Finish | Bright white HR Nylon |
Adjustable mirror with handle
Ref. 510202C
Tilting glass mirror with handle for easy adjustment those in a seated position or in a wheelchair.
For combined installation: can be used from sitting or standing position.
Quick and easy to install: simply clip into place.
Anti-theft lock.
Metallised anthracite tab handle.
Mirror made from 6mm Securit safety glass.
Mirror dimensions: 500 x 600mm.
Can be tilted up to 20°.
TECHNICAL FEATURES
Adjustable mirror with handle
Ref. 510202C
Height | 500mm |
---|---|
Depth | 84mm |
Width | 630mm |
Width to the wall | 70mm |
Thickness | 6mm |
Finish | Metallised anthracite |
Adjustable mirror with handle
Ref. 510202N
Tilting glass mirror with handle for easy adjustment those in a seated position or in a wheelchair.
For combined installation: can be used from sitting or standing position.
Quick and easy to install: simply clip into place.
Anti-theft lock.
Metallised anthracite tab handle.
Mirror made from 6mm Securit safety glass.
Mirror dimensions: 500 x 600mm.
Can be tilted up to 20°.
Technical features
Tilting mirror with tab handle
Ref. 510202N
Height | 500mm |
---|---|
Depth | 84mm |
Width | 600mm |
Width to the wall | 70mm |
Thickness | 6mm |
Finish | Bright white HR Nylon |