PVD viimistlussed:
PVD:(physical vapor deposition) on kõrgtehnoloogiline molekulaar-protsess mis annab tootele eluaegse garantii tuhmumise vastu.
• Washroom shelf made of AISI 304 stainless steel bright finish, for wall mounting.
• With smooth clean lines to suit modern bathrooms, this shelf is suitable for the hotel sector, for fitting out the bathrooms in the hotel rooms.
• Stainless steel construction ensures durability and rust proof.
• With no removable components.
• It normally goes along with a stainless steel towel rail or towel ring.
• Mounting on the wall by means of two supplied screws.
Shower basket, wall mounted, 338 x 150 x 80 mm
338 x 150 x 80mm, made of Aluminium, generous counter surface 370cm2, with a scratch-resistant powder coating with antibacterial protection. Available in the Cavere® colour range. With 80mm high storage basket with bracket and slotted metal bottom for good drainage, easy fixing. Concealed screw fixing.
Supplied with stainless steel Torx screws 5 x 60mm dia. and plugs for solid masonry.
Profile valamusegisti, kroom LM
1 handle
Ceramic cartridge
Pop up waste with click function
Müüja: PEGU OÜ
PROMO KUPONGI KOOD PEGU-KEVAD2025
Olete leidnud õige toote – nüüd on aeg see enda omaks teha.
Lisage toode ostukorvi ja jätkake tellimusega – nii on ta varsti juba teie juures!
PEGU.ee – targad valikud inimestele, kes hindavad stiili ja kvaliteeti.
Valamu jalaga 700x700, kõrgus 850mm , R/V teras
Stainless steel floor standing bulk sink, 700x700x850 mm
| Order number | 93150 |
| Code | SLUN 15 |
Valamu R/V terasest
Garaazi/avalikude ruumidele
Liivapüüdur SAND-02 Elcee 220, 3,5L, R/V teras, AISI304
Kasutusjuhend:
Liivapüüdur SAND-02 Elcee 220, 3,5L, roostevaba teras, AISI304
Liivapüüdur SAND-02 Elcee 220 on mõeldud liiva filtreerimiseks veest ning selle maht on 3,5 liitrit. Seade on valmistatud roostevabast terasest (AISI304) ja on ideaalne paigaldamiseks otse kraanikausi või valamualuse alla.
Paigaldamine:
Liivapüüdur on lihtne paigaldada otse kraanikausi või valamualuse alla, kasutades selleks sobivaid kinnitusvahendeid.
Kasutamine:
Liiv ja mustus kogunevad seadme alumisse kaussi. Seadme efektiivse töö tagamiseks on vajalik kaussi regulaarselt tühjendada.
Hooldus:
Kauss on kinnitatud korpuse külge kahest küljest kinnitustega. Kaussi puhastamiseks eemaldage see kinnitustest, tühjendage ja vajadusel puhastage.
Üldmõõtmed millimeetrites: Ø174 x 235
Sissevoolu mõõtmed millimeetrites: 1,5"
Väljavoolu mõõtmed millimeetrites: 1,5"
Materjal: AISI 304
Materjali paksus millimeetrites: 1,5
Kogukaal kilogrammides: 2,50
Wash trough acc. Separator SAND-02
Description
The sand catcher has a capacity of 3,5 litres and is ideal for filtering sand from water.
It is easy to mount directly under a washbasin or a wash trough.
The sand catcher is delivered with a flexible outlet that will enable straight or bent installation possibilities.
Material: Stainless steel AISI 304
Overall dimension in mm Ø174 x 235
Inlet dimension in mm 1.5"
Outlet dimension in mm 1.5"
Material AISI 304
Material thickness in mm 1.5
Gross weight in kg 2.50
AFO 01 is a stainless steel wall-mounted drinking fountain of modern design with a manual press valve that allows its easy use. The water flows only when the valve is pressed and then there is a certain adjusted time to rinse out the nozzle.
The water inlet is fitted with a flexible hose, the siphon is made from a stretchy, flexible connector. The flexible finish of the water inlet and outlet allows the variable and problem-free connection of the fountain.
AFO 01 stainless steel fountain is suitable mainly for schools, medical facilities and spa resorts, and is utilizable outdoors.
AFO 01 is made of stainless steel AISI 304.
AFO 01.CL is made of stainless steel AISI 316 and is suitable into the areas with higher concentration of chlorine (e.g. swimming pools).
Sensor-controlled fountain possible made to order.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).
| Water inlet | G 1/2" |
| Water pressure | 0,2 – 0,6 MPa (recommended 0,3 MPa) |
| Outlet | d = 40 mm |
| Inner dimension of the fountain | d = 245 mm |
| Weight | 4 kg |
Copyright ⓒ 2016-2024 www.pegu.ee Kõik õigused kaitstud. Pegu OÜ
