Tootegrupid
jpg_186000_1.jpg Zoom

Delabie valamu pesurenn 1400mm roostevaba teras satiin AISI304

Tootekood: DE-186000
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
Hind:
3220,80 €
Kuumakse alates: 273,77 €
Kogus: - +
   - või -   

Surgical scrub-up trough with high upstand 
Ref. 186000

Wall-mounted surgical scrub-up trough with 450mm upstand. 
Suitable for hospitals and healthcare facilities. 
Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.2mm. 
Length 1,400mm, 2 services. Without tap hole. 
Smooth surface and rounded inside edges for easy cleaning. 
"Hygiene+" design: reduces niches where bacteria can develop, concealed trap, easy to clean.
Drainage on the right. Without overflow. 
Supplied with fixing elements.Weight: 34.4kg.

Failid

Sarnased tooted
 
 

ZAC 1/20, ZAC 1/50, ZAC 1/36L

power supply

   
 
 
 

ZAC is a safe source of voltage supply intended to power automatic sanitary equipment made by AZP Brno, Ltd. 

The source of power supply consists of a safety transformer produced in accordance with ČSN IEC 742+A1 standards. All kinds of sensors can be connected to these sources in random combinations, as can other devices with a supply voltage of 12 V, 50 Hz (total power requirement either 20 VA, 50 VA or 36 VA). 

ZAC 1/20 and ZAC 1/50 are independent sources, 1/36L ZAC is the source for the location on the DIN-rail (4 modules).

 

 
Version types
ZAC 1/20 - source of power supply with output 20 VA
ZAC 1/50 - source of power supply with output 50 VA
ZAC 1/36L - source of power supply with output 36 VA
 
Source of power supply can be placed at a maximum distance of 30 m from the connected appliance. 
 
Basic technical information
Input voltage: 230 V, 50 Hz
Output voltage: 12 V, 50 Hz
Power requirement: 20 VA (ZAC 1/20)
  50 VA (ZAC 1/50)
  36 VA (ZAC 1/36L)
Electricity protection: IP 55 (ZAC 1/20, ZAC 1/50)
  IP 20 (ZAC 1/36L)
Weight: 0,8 kg (ZAC 1/20, ZAC 1/36L)
  1,2 kg (ZAC 1/50)
 
 
Requirements for setting up the construction
ZAC 1/20, ZAC 1/50
  1. Set-up supply of electricity 230 V,50 Hz – cable CYKY 3Cx1,5
  2. Set-up niche for flush mounting – size as per installed source
  3. Distribution to each device is carried out by cable CYKY 2Ax1,5
ZAC 1/36 L
  1. It is installed on the DIN-rail - width of 4 modules
 
 
Figure
ZAC 1/20
 
ZAC 1/50
 
 
 
 
 
Product title
ZAC 1/20 - 
power supply for up to 3 devices - 230V, 50Hz
ZAC 1/50 - 
power supply for up to 8 devices - 230V, 50Hz
ZAC 1/36L - 
power supply for up to 6 devices - 230V, 50Hz
Tootekood: AZP-ZAC 1-20 ,   Tarneaeg: 3-4 nädalad
105,00 €

DRINKING SYSTEM

  • Frost-free drinking system for cattle and horses
  • Fresh and clean water for the animals all year round
  • Without wiring or electricity 
  • A minimum of maintenance
  • No concern about filling the drinking vessels
  • No concern about cleaning the drinking vessels
 
Automaatjootjad sobivad kasutamiseks nii karjamaal kui ka tallides ning nende läheduses asuvates joogikohtades.
Jootjaid on lihtne kasutada ning hobused saavad kiiresti aru, et mugavam on vee juurdevoolu avamiseks vajutada klapile
mitte nina otsaga vaid selle ülaosaga. Kui koon (mokad) on joomiseks vabad, joobki hobune loomulikul viisil vee pindmiselt
kihilt. Seetõttu olemegi valinud jooginõuks lai ja sügav kauss, et tekiks joomiseks mugav veepind.
 
Töötamise põhimõte
Tõusutoru on varustatud isetühjeneva 3-tee
ventiiliga, mis on paigaldatud kaevu, mis omakorda
on süvistatud pinnasesse.
Kui jootjat ei kasutata on veest tühi nii ventiil kui
ka tõustoru, milles olev vesi võiks muidu külmuda.
Nii jootja ventiil ja tõusutoru on külmumiskindlad nii
kaua kuni on külmumiskindel ka vee toitetorustik.
 
 
Tootekood: FL-A342 ,   Tarneaeg: 14-21 päeva
1004,67 € (10%)
1116,30 €

Intra seinale kinniatav majandusvalamu VK 655x505x250mm, R/V teras

Wall hung utility sink in stainless steel. Supplied with fixing brackets. 

Tootekood: I-VK60STD ,   Tarneaeg: 14-21 päeva
427,00 €

Joogifontään põranda/sein pudeli täitmisega, mehaaniline R/V teras AISI304

AFO 01.SL

drinking fountain with spout for filling bottles designed to stand and to be attached to wall

AFO 01.SL is a drinking fountain with spout for filling bottles designed to stand and to be attached to wall. Water runs for the time for which the valve is pressed plus the pre-set period after it is released; thus the jet can be rinsed. Second pressure valve serves for bottle filling.

In standard version the fountain is produced with a niche suitable for filling the bottle of 0.7 l. Fliountain with a niche for filling the botlles of 1.5 l can be made on order. 

Water supply is provided by a flexible hose, trap comprises an elastic flexible couple. Flexible design of water supply and outflow allows variable and easy connection of the drinking fountain as well as its dismounting. 

TAutomatic drinking fountain (with a sensor) can be supplied per order.

AFO 01.SL is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1). 

Package contents

  • Stainless housing with cone
  • Pressure valve with jet
  • Pressure valve for bottle filling
  • Flexible hose outflow
  • Fixing and connecting material
dimensions 330 x 900 x 365 mm
water outlet d = 40 mm
water inlet G 1/2"
water pressure 2 - 6 Bar, recommended 3 Bar
weight 12 kg

 

  • Set up water outlet d = 40 mm
  • Set up water inlet G 1/2"

 

Tootekood: AZP-AFO01.SL ,   Tarneaeg: 3-4 nädalad
1917,00 €
 Roostevaba teras valamu KEG

Characteristics

  • stainless steel wall hung washbasin
  • with a tap hole
  • material AISI - 304
  • brushed finish
Tootekood: SA-SLUN77A ,   Tarneaeg: 14-21 päeva
1179,00 €
Projektide hinnapäringud ja tooteinfo kättesaadavusega seotud küsimused palume saata e-mailile info@pegu.ee

Ära unusta kasutada ostukorvis kampaaniakoodi 

PEGU-SUVI