UUDIS! Invatooted
Projektide hinnapäringud palume saata e-mailiga: info@pegu.ee
Klientide nõustamine 9.00-19.00, tel.+372 515 0681
PEGU0121 sisesta sooduskood ostukorvi lehel kupongi lahtrisse!
AUZ 08 INV is a stainless-steel WC in matt design for the disabled. It is a stainless-steel toilet to stand on the floor at the wall. The drain is directed backwards (the bottom drain version AUZ 02 INV). The closet is based on the standard AUZ 08, which is heightened and lengthened to fulfil the directive regarding products for disabled persons. To increase the user comfort, the seating part is provided with a seat from hardened plastic. The closet includes a removable backrest recommended by the League for the rights of the wheelchair bound.
The standing WC is suitable for places where the common closet cannot be attached to the side wall, because of a thin bearing particle, for example.
It is suitable to supplement the closet with an automatic pressure-water flushing device with delayed flushing AUZ 3 INV (suitable for the disabled) or any flushing device with a cistern.
|
||||||||||||
| Complete delivery | |
|
|
1411,00 €
Termostaatsegistid
Termostaatsegisti Thermixa 300
- Artikli number 57503
- Viimistlused Kroom/must
- Standardfunktsioonid
- Keraamiline tööorgan.
- Põletuskaitsega
- Veesäästu funktsioon Eco-Klik.
- 1/2" ühendus käsiduši voolikule.
- Kummiaeraator – lihtne puhastada.
- Standardne tsentrite vahe 150 mm.
- Varustatud ilukatete ja ekstsentrikutega.
- Ümberlüliti.
387,00 €
Termostaatsegistid
Termostaatsegisti Thermixa 300
- Artikli number 57403
- Viimistlused Kroom/must
- Standardfunktsioonid
- Keraamiline tööorgan.
- Põletuskaitsega
- Veesäästu funktsioon Eco-Klik.
- 1/2" ühendus käsiduši voolikule.
- Standardne tsentrite vahe 150 mm.
- Varustatud ilukatete ja ekstsentrikutega.
Clover Easy
Valamusegisti, sisaldab X-ChangeTMühendust
- Artikli number 60807
- Viimistlused Kroom/must
- Standardfunktsioonid
- Keraamiline tööorgan.
- Põletuskaitsega
- Veesäästu funktsioon Eco-Save.
- Klikk põhjaklapp.
- Kummiaeraator – lihtne puhastada.
CLOVER GREEN 4845174
Käepide valamusegistile kroom/must
57,00 €
CLOVER GREEN 4845074
Käepide köögisegistile 60000.00 kroom/must
60,00 €
Space
Köögisegisti
- Artikli number 10004
- Viimistlused Kroom
- Standardfunktsioonid
- Keraamiline tööorgan.
- Pööratav jooksutoru.
- 120° pöördepiiraja.
- Artikli number 10010
- Viimistlused Kroom
- Standardfunktsioonid
- Keraamiline tööorgan.
- Põletuskaitsega
- Veesäästu funktsioon Eco-Save.
- Pööratav jooksutoru.
- 120° pöördepiiraja.
Space
Köögisegisti
Tootekood Viimistlus Seeria
1001000 EAN Nr.: 5708516728740 Kroom
SpaceStandardomadused:
1 käepide
120° pöördepiiraja
Keraamiline tööorgan Põletuskaitsega (38oC) Veesäästu funktsioon Eco-Save
Invakäepide
Keraamiline tööorgan
Keraamiline tööorgan
Invakäepide
Keraamiline tööorgan
Invakäepide
Keraamiline tööorgan
Be-line corner grab bar 2 walls, anthracite
Ref. 511941C
Be-Line corner grab bar Ø 35mm for WCs, showers or baths.
Use as a shower rail and to support the user in an upright position.
Helps and secures entry and movement in the shower also with getting in and out of the bath.
Helps with the transfer from a wheelchair to the toilet seat.
Dimensions: 695 x 695mm.
Aluminium tube thickness 3mm. Solid aluminium fixing points.
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip.
Metallised anthracite powder-coated aluminium provides a good visual contrast with the wall.
Uniform surface for easy maintenance and hygiene.
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance.
Concealed fixings.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Tested to over 200kg. Maximum recommended user weight: 135kg.
Technical features
Be-line corner grab bar 2 walls, anthracite
Ref. 511941C
| Length | 695mm |
|---|---|
| Width | 695mm |
| Width to the wall | 38mm |
| Thickness | 3mm |
| Finish | Metallised anthracite powder-coated aluminium |
Be-line corner grab bar 2 walls, white
Ref. 511941W
Be-Line corner grab bar Ø 35mm for showers.
Use as a shower rail and to support the user in an upright position.
Helps and secures entry and movement in the shower also with getting in and out of the bath.
Helps with the transfer from a wheelchair to the toilet seat.
Dimensions: 695 x 695mm.
Aluminium tube thickness 3mm. Solid aluminium fixing points.
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip.
Matte white powder-coated aluminium finish provides a good visual contrast with the wall.
Uniform surface for easy maintenance and hygiene.
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance.
Concealed fixings.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Tested to over 200kg. Maximum recommended user weight: 135kg.
Technical features
Be-line corner grab bar 2 walls, white
Ref. 511941W
| Length | 695mm |
|---|---|
| Width | 695mm |
| Width to the wall | 38mm |
| Thickness | 3mm |
| Finish | Matte white powder-coated aluminium |
Be-Line sliding shower head holder
Ref. 511911C
Be-Line sliding shower head holder.
Metallised anthracite.
Support for tilting shower head.
Easy-to-operate ergonomic grip to adjust the height of the shower head holder.
Slides by pressing the grip or pulling on the flexible hose.
Technical features
Be-Line sliding shower head holder
Ref. 511911C
| Depth | 48mm |
|---|---|
| Length | 113mm |
| Width | 80mm |
| Finish | Metallised anthracite |
Be-Line sliding shower head holder
Ref. 511911W
Be-Line sliding shower head holder.
Matte white.
Support for tilting shower head.
Easy-to-operate ergonomic grip to adjust the height of the shower head holder.
Slides by pressing the grip or pulling on the flexible hose.
TECHNICAL FEATURES
Be-Line sliding shower head holder
Ref. 511911W
| Depth | 48mm |
|---|---|
| Length | 113mm |
| Width | 80mm |
| Finish | Matte white |
Metallised anthracite shelf for grab bars for showers
Ref. 511922C
Metallised anthracite shelf for grab bars, for showers.
Installed against the all on the bar.
Anti-theft locking screw.
Ideal for shower gel or soap.
2 hooks for gloves.
TECHNICAL FEATURES
Metallised anthracite shelf for grab bars for showers
Ref. 511922C
| Height | 71mm |
|---|---|
| Depth | 70mm |
| Length | 165mm |
White shelf for grab bars for showers
Ref. 511922W
White shelf for grab bars, for showers.
Installed against the all on the bar.
Anti-theft locking screw.
Ideal for shower gel or soap.
2 hooks for gloves.
TECHNICAL FEATURES
White shelf for grab bars for showers
Ref. 511922W
| Height | 71mm |
|---|---|
| Depth | 70mm |
| Length | 165mm |
DESCRIPTION
Cover plate for Be-Line drop-down rail
Ref. 511950C
Be-Line metallised anthracite cover plate without fixings plate.
Conceals fixing screws when the drop-down support rail is removed.
Reduces the number of drop-down rails in a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility.
TECHNICAL FEATURES
Cover plate for Be-Line drop-down rail
Ref. 511950C
| Height | 230mm |
|---|---|
| Depth | 17mm |
| Width | 105mm |
| Finish | Metallised anthracite |
Cover plate for Be-Line drop-down rail with fixings plate
Ref. 511950FC
Be-Line metallised anthracite cover plate with fixings plate.
Conceals fixing screws when the drop-down support rail is removed.
Reduces the number of drop-down rails in a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility.
Supplied with stainless steel screws for concrete walls.
TECHNICAL FEATURES
Cover plate for Be-Line drop-down rail with fixings plate
Ref. 511950FC
| Height | 230mm |
|---|---|
| Depth | 17mm |
| Width | 105mm |
| Finish | Metallised anthracite |
Cover plate for Be-Line drop-down rail
Ref. 511950W
Be-Line matte white cover plate without fixings plate.
Conceals fixing screws when the drop-down support rail is removed.
Reduces the number of drop-down rails in a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility.
TECHNICAL FEATURES
Cover plate for Be-Line drop-down rail
Ref. 511950W
| Height | 230mm |
|---|---|
| Depth | 17mm |
| Width | 105mm |
| Finish | Matte white |
Cover plate for Be-Line drop-down rail with fixings plate
Ref. 511950FW
Be-Line matte white cover plate with fixings plate.
Conceals fixing screws when the drop-down support rail is removed.
Reduces the number of drop-down rails in a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility.
Supplied with stainless steel screws for concrete walls.
TECHNICAL FEATURES
Cover plate for Be-Line drop-down rail with fixings plate
Ref. 511950FW
| Height | 230mm |
|---|---|
| Depth | 17mm |
| Width | 105mm |
| Finish | Matte white |
Tilting mirror with long ergonomic lever
Ref. 510201N
Tilting mirror with long ergonomic lever which facilitates adjustment of mirror angle from a sitting position or by wheelchair users.
For combined installation: can be used from sitting or standing position.
Quick and easy to install: just clip into place.
Anti-theft lock.
Bright white HR Nylon lever
6mm thick Securit safety glass mirror.
Mirror dimensions: 500 x 600mm.
Can be tilted up to 20°.
Technical features
Tilting mirror with long ergonomic lever
Ref. 510201N
| Height | 500mm |
|---|---|
| Depth | 230mm |
| Width | 630mm |
| Width to the wall | 70mm |
| Thickness | 6mm |
| Finish | Bright white HR Nylon |
Adjustable mirror with handle
Ref. 510202C
Tilting glass mirror with handle for easy adjustment those in a seated position or in a wheelchair.
For combined installation: can be used from sitting or standing position.
Quick and easy to install: simply clip into place.
Anti-theft lock.
Metallised anthracite tab handle.
Mirror made from 6mm Securit safety glass.
Mirror dimensions: 500 x 600mm.
Can be tilted up to 20°.
TECHNICAL FEATURES
Adjustable mirror with handle
Ref. 510202C
| Height | 500mm |
|---|---|
| Depth | 84mm |
| Width | 630mm |
| Width to the wall | 70mm |
| Thickness | 6mm |
| Finish | Metallised anthracite |
Adjustable mirror with handle
Ref. 510202N
Tilting glass mirror with handle for easy adjustment those in a seated position or in a wheelchair.
For combined installation: can be used from sitting or standing position.
Quick and easy to install: simply clip into place.
Anti-theft lock.
Metallised anthracite tab handle.
Mirror made from 6mm Securit safety glass.
Mirror dimensions: 500 x 600mm.
Can be tilted up to 20°.
Technical features
Tilting mirror with tab handle
Ref. 510202N
| Height | 500mm |
|---|---|
| Depth | 84mm |
| Width | 600mm |
| Width to the wall | 70mm |
| Thickness | 6mm |
| Finish | Bright white HR Nylon |
Be-Line® wall-mounted toilet brush set with lid and long handle
Ref. 510051C
Wall-mounted Be-Line® toilet brush set with lid and long lever.
Metallised anthracite powder-coated 304 bacteriostatic stainless steel.
Model with anti-theft lock for fixing.
Robust model.
Long ergonomic handle: easy for wheelchair users or those who have difficulty bending to use.
Easy to clean: plastic bowl can be removed from above.
Plastic bowl with reservoir: prevents the brush from sitting in stagnant water and splashing when next used.
Toilet brush automatically centres itself in the holder.
Stainless steel thickness: 1mm body.
Dimensions: Ø 90 x 580mm.
TECHNICAL FEATURES
Be-Line® wall-mounted toilet brush set with lid and long handle
Ref. 510051C
| Height | 580mm |
|---|---|
| Finish | 304 stainless steel powder-coated metallised anthracite |
Be-Line® wall-mounted toilet brush set with lid and long handle
Ref. 510051MW
Wall-mounted Be-Line® toilet brush set with lid and long lever.
White powder-coated 304 bacteriostatic stainless steel.
Model with anti-theft lock for fixing.
Robust model.
Long ergonomic handle: easy for wheelchair users or those who have difficulty bending to use.
Easy to clean: plastic bowl can be removed from above.
Plastic bowl with reservoir: prevents the brush from sitting in stagnant water and splashing when next used.
Toilet brush automatically centres itself in the holder.
Stainless steel thickness: 1mm body.
Dimensions: Ø 90 x 580mm.
TECHNICAL FEATURES
Be-Line® wall-mounted toilet brush set with lid and long handle
Ref. 510051MW
| Height | 580mm |
|---|---|
| Finish | 304 stainless steel powder-coated matte white |
Be-Line drop-down support rail, L. 650mm, anthracite
Ref. 511960C
Be-Line drop-down support rail for people with reduced mobility.
In the lowered position use as a grab bar, as a support for standingand for assisting movement, for WCS or showers.
Allows side access in the raised position.
Removable: easy to remove with anti-theft locking system. Reduces the number of barsin a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility.
Slowed down descent. Retained in upright position.
Aluminium tube.
Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip.
Metallised anthracite powder-coated aluminium finish provides a good visual contrast with the wall.
Uniform surface for easy maintenance and hygiene.
Concealed fixings secured to wall by a 304 stainless steel plate, 5mm thick.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Dimensions: 650 x 210 x 120mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
TECHNICAL FEATURES
Be-Line drop-down support rail, L. 650mm, anthracite
Ref. 511960C
| Height | 210mm |
|---|---|
| Length | 650mm |
| Width | 120mm |
| Finish | Powder-coated metallised anthracite aluminium |
Description
Be-line® matte white angled grab bar 135°, 220 x 220mm
Ref. 511983W
Be-line® angled grab bar 135°, Ø 35mm, for people with reduced mobility.
For use as a handrail (horizontal part) or as a grab rail (135° part), for WCs, showers or baths.
Universal for either left or right side.
Aluminium tube thickness 3mm. Solid aluminium fixing points.
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip.
Matte white powder-coated aluminium; provides a good visual contrast with the wall.
Uniform surface for easy maintenance and hygiene.
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance.
3 fixing points prevent the hand from getting trapped and simplify installation.
Concealed fixings.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Dimensions: 220 x 220mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
Technical features
Be-line® matte white angled grab bar 135°, 220 x 220mm
Ref. 511983W
| Height | 220mm |
|---|---|
| Length | 220mm |
| Width to the wall | 38mm |
| Thickness | 3mm |
| Finish | Matte white powder-coated aluminium |
.jpg)
